THE BBQ BRETHREN FORUMS

Welcome to The BBQ Brethren Community. Register a free account today to become a member and see all our content. Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Well got the 22.5" WSM loaded down with 2 butts and a 16lb brisket. Pulled the thermo out to test it . Boiling water it was reading right under 200* Redicheck reading 210 or so in the water, double checked with thermopen. So, the WSM thermo is junk. Guess Ill be ordering a couple of tel-tru's next week. I am way to drunk tonight to order anything off the internet lol..
 
I checked it out of the box. It read about 20* light. I didn't see any way to adjust.
If there is a hex shoulder on the back side of the dial case, you can grab that with a wrench and turn the entire dial case with your hand. Boiling water is a good way to calibrate if you're not in the mountains....212 deg F
 
The thermometer in the dome measures temperature at the dome not at the rack.
Get a digital thermometer with a rack probe and clip it in place.
Even then, keep in mind that temps will vary across the inside of the cooker.
 
Back
Top