Beast Drinker
Full Fledged Farker
- Joined
- Aug 27, 2009
- Location
- Virginia Beach, Va
I knew you would be happy with that.
As soon as you're ready to sell the MOAB, call me. :wink:
Actually, I've got an old riding lawnmower that I use for parts. I'm thinking about pulling the front end and installing under the Egg Table backwards. That way I can pull it while steering - like you say. The first problem I foresee is that it would mount in the center and pivot. The table would rock on that side. No good. I'm still planning it out. As you can tell, I dont move too fast.
I see your dilema,
You would have to install some type of suspension, like a coilover style shock with probably a 75 lb rated spring. I am unsure how you would hide it because the sprung width is only as wide as a coil over is mounted on top. Also remember if you install that axle backwards you are gonna have a ton of negative caster and it won't want to pull straight worth a darn. Let me see if I can find the axle you need on a racing message board. Midget madness.com here I come.