UDS Cover Ideas?

[JMSetzler]

I'm trying to decide what I want to do for a cover for my UDS. Anyone have any cool ideas with pics?

 

[gtr]

No pix handy, but I use a cover for a 26" Weber kettle.

 

[devious]

i use the same cover as above.

 

[TheMidnightSmoker]

If you want a custom made Vinyl cover for uour drum this person was mentioned on the BDS site.
http://vinylcoveringsbymel.com/

 

[Carbon]

I'm using a Char Broil water smoker cover, 30" diameter, 3 ft tall. I got it at Home Depot for $8.

 

[Abelman]

Look here. Not really on this page as it's bookmarked.

I've been using their covers for years and love them.

http://www.the-cover-store.com/item_detail.aspx?ItemCode=CSP06113KH2

 

[ozlites]

 

[N8man]

When I kept my DrumPit outside, I used an 8x10 tarp and bungie cords..

 

[JMSetzler]

When I kept my DrumPit outside, I used an 8x10 tarp and bungie cords..

I like that idea and will probably go with it...

 

[Boshizzle]

Home Depot has a cover made for a 22.5" grill that fits my UDS perfectly. It only cost $7.99 too.

 

[bbqchicken]

When I kept my DrumPit outside, I used an 8x10 tarp and bungie cords..

good idea. thats what I had in mind. It doesn't have to look pretty, only for the birds to crap on right?

 

[El Ropo]

I picked up a Charbroil (or brinkmann, or masterforge) generic cover for a 22.5" kettle. They are 36" high with an elastic bottom. Paid under $8.00 at Lowes, and plenty of room for a dome lid with the 36" height and being 30" wide. Fits perfectly. Since they're cheap, if they don't like freezing weather, I can just get another one. $6.95@ lowes.

 

[Ole Man Dan]

Home Depot has a cover made for a 22.5" grill that fits my UDS perfectly. It only cost $7.99 too.

Same here...
It's an improvement over the 55 gal. can-liner I used till I got the
Weber cover.

 

[GEORGIA CRACKER(FROM TEX)]

I found a cover at Wal Mart for $5 that fits great, and has a draw string around the bottom. It covers down to about 8" from the bottom of the barrel. I have a flat top lid on mine. Works great for the price.

 

[bbqchicken]

I picked up a Charbroil (or brinkmann, or masterforge) generic cover for a 22.5" kettle. They are 36" high with an elastic bottom. Paid under $8.00 at Lowes, and plenty of room for a dome lid with the 36" height and being 30" wide. Fits perfectly. Since they're cheap, if they don't like freezing weather, I can just get another one. $6.95@ lowes.

cool Ill check it out

 

[righteousdog]

i also use the 7.99 special. a custom one would be cool but would probably cost more than the cooker...