Dlabrie
Is lookin for wood to cook with.
- Joined
- Jul 8, 2013
- Location
- Campton, NH
I am starting my first UDS build. I will post pictures as I go along. I started with the fire basket. It is 12" high with the 17-18" grate attached about 3" up from the bottom. I will tack weld it when I figure out how to use my welder.
On the barrel, I have 3 sets of holes evenly spaced around the barrel. I used a step drill bit that I borrowed. It only went to 7/8th " and I need 1" for the vents on the bottom. So I ordered one from Amazon that goes to 1 1/8". It should be here Thursday. The barrel held non-toxic antifreeze. I plan to cut off the top and burn it tomorrow with a propane weed burner torch. I will post more picts as I progress. All comments and suggestions are welcome :grin:
On the barrel, I have 3 sets of holes evenly spaced around the barrel. I used a step drill bit that I borrowed. It only went to 7/8th " and I need 1" for the vents on the bottom. So I ordered one from Amazon that goes to 1 1/8". It should be here Thursday. The barrel held non-toxic antifreeze. I plan to cut off the top and burn it tomorrow with a propane weed burner torch. I will post more picts as I progress. All comments and suggestions are welcome :grin: