My neighbor knocked down my mailbox. So I thought I would give the Mailbox mod a try for my UDS. This will allow me to Hot Smoke using the AMNPS.
First I drilled multiple wholes in the bottom of the mailbox to allow for ventilation. Next I cut a 4 inch hole in the mailbox by using a jig saw. Then inserted a transition piece. I repeated this on the smoker.
Next I attached a 2 foot drier ventilation tube to the mailbox:
Connected to the drum. Mailbox sitting on some old pavers:
Complete set up along with wind screen:
I have two briskets currently on and the AMNPS is working great.
First I drilled multiple wholes in the bottom of the mailbox to allow for ventilation. Next I cut a 4 inch hole in the mailbox by using a jig saw. Then inserted a transition piece. I repeated this on the smoker.
Next I attached a 2 foot drier ventilation tube to the mailbox:
Connected to the drum. Mailbox sitting on some old pavers:
Complete set up along with wind screen:
I have two briskets currently on and the AMNPS is working great.