mbshop
Babbling Farker
- Joined
- Jun 24, 2007
- Location
- visalia, ca
started to have some starting issues with my q220. i knew it wasn't the tank etc as once it started it heated up just fine. the spark was so so but
still tried to light. so i took a close look and found some of the burner holes plugged up but some other didn't look right. i also found that the plate thats over the spark tip was not adjusted correctly. so i took a gas welding tip cleaner and cleaned out all the holes. after that it started right up with the flame burning around the burner quickly. i don't use the q that much but it seems the holes get messed up purty quickly.
so if you think something is off, make sure to clean the burner holes out !
still tried to light. so i took a close look and found some of the burner holes plugged up but some other didn't look right. i also found that the plate thats over the spark tip was not adjusted correctly. so i took a gas welding tip cleaner and cleaned out all the holes. after that it started right up with the flame burning around the burner quickly. i don't use the q that much but it seems the holes get messed up purty quickly.
so if you think something is off, make sure to clean the burner holes out !