Smokin Turkey
is Blowin Smoke!
- Joined
- Jul 28, 2008
- Location
- Huntingd...
Ok, so after I finally got to see Smokin_D's tiny reverse flow, I figured I'd start building my own. Well a prototype and then simplify the thing for reproducing. Anyway.. I printed 3 pictures I took of Rich's little guy and one of a new Lang (which is more the design I prefer) and set out on a mission! I just started cutting and welding with only the idea I would build it as I go with only a vague idea of what it will be when it is done.
Meet "twiggy" Day 1...
This is the inspiration picture I hung up..
Here you see her from the end which will attach to the firebox.
Here you can see her open and the heat duct with grease drain running down it.
Finally, here you can see the end I have left open until last to make sure everything can go in and out of the main door.
The pipe I chose is just under 1/4" thick and so far, all the materials I have used have been at least 1/8" making her a tiny tank!
I hope to get some extra time this week to finish the firebox and get the exhaust on her not to mention build the trailer with lights! not sure if she will have Propane starter but I do like the setup on Rich's little bugger.
-Brian
Meet "twiggy" Day 1...
This is the inspiration picture I hung up..
Here you see her from the end which will attach to the firebox.
Here you can see her open and the heat duct with grease drain running down it.
Finally, here you can see the end I have left open until last to make sure everything can go in and out of the main door.
The pipe I chose is just under 1/4" thick and so far, all the materials I have used have been at least 1/8" making her a tiny tank!
I hope to get some extra time this week to finish the firebox and get the exhaust on her not to mention build the trailer with lights! not sure if she will have Propane starter but I do like the setup on Rich's little bugger.
-Brian