Texassippian
MemberGot rid of the matchlight.
- Joined
- Aug 16, 2015
- Location
- Houston, TX
So, I am a new guy on this forum and a new guy to smoking meat....but my neighbor here in Houston put his New Braunfels offset smoker on the street for heavy junk day. So I got it for free.
Questions:
What model is this?
Was this a good meat smoker and should I restore it? (FYI there's no holes just a little rust.)
It looks like it was originally gray, if I sand it down should I switch colors to black or try to stay with silver/gray high heat temperature spray from HD/Lowes?
Sanding - use orbital sander or drill with 5" 80 grit sanding disks with my corded drill? Steel wool/brillo pads?
I appreciate any thoughts.
Jason
Questions:
What model is this?
Was this a good meat smoker and should I restore it? (FYI there's no holes just a little rust.)
It looks like it was originally gray, if I sand it down should I switch colors to black or try to stay with silver/gray high heat temperature spray from HD/Lowes?
Sanding - use orbital sander or drill with 5" 80 grit sanding disks with my corded drill? Steel wool/brillo pads?
I appreciate any thoughts.
Jason