THE BBQ BRETHREN FORUMS

Welcome to The BBQ Brethren Community. Register a free account today to become a member and see all our content. Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

azfireman

Got Wood.
Joined
May 9, 2007
Location
Phoenix,AZ
How do you season a new smoker??? Do I fill the water bowl up or just smoke dry?? Are any oils better then others?? Do I really need to take the bark off of the wood (hickery)? For how long and at what temps????
Thank you always your humble grasshopper,
Frank the tank
 
no water bowl,
Spray the entire inside and out with a few cans of PAM if u dont want to use the brush/oil.

Alternate high heat and heavy smoke. Temps should get as high as 350-400. 3-4 hours. i use a pile of lump and throw in cold logs chunked up and damper down a little bit so they smoke before igniting, then open up the dampers to get the temps up.

the outside will be tacky for a week or 2 after seasoning, but water will bead off it which is a good thing. Eventually the tackiness goes away.


of course, after the first hour its ok to cook a few steaks and some kielbasa or fatties in the chamber to snack on. Newver waste heat and smoke. !
 
If you really want to get creative, put some onions in a food processor and run them till they are almost liquid, put them in the oil and paint that on, it adds a nice kick to the seasoning!
 
No need to get rid of the bark for seasoning and I reccomend against oiling the outside. I have never done that to any of my cookers. I have to hit the exterior of the firebox on occasion.
 
no need to season a WSM. Its porcelin coated.

as far as seasoning the outside goes.

Its in the instructions from Dave Klose. Seasoning the inside AND outside is in his instructions.
 
no need to season a WSM. Its porcelin coated.

as far as seasoning the outside goes.

Its in the instructions from Dave Klose. Seasoning the inside AND outside is in his instructions.


Thanks BBQ chef, did not mean for a thread hi-jack. Thanks Again, RIX
 
The only thign mesquite wood is good for (imo) is seasoning the smoker. It gets real hot.
 
no water bowl,
Spray the entire inside and out with a few cans of PAM if u dont want to use the brush/oil.

Alternate high heat and heavy smoke. Temps should get as high as 350-400. 3-4 hours. i use a pile of lump and throw in cold logs chunked up and damper down a little bit so they smoke before igniting, then open up the dampers to get the temps up.

the outside will be tacky for a week or 2 after seasoning, but water will bead off it which is a good thing. Eventually the tackiness goes away.


of course, after the first hour its ok to cook a few steaks and some kielbasa or fatties in the chamber to snack on. Newver waste heat and smoke. !


Do you spray the INSIDE of the firebox too????
 
Back
Top