Looking for bbq insulation .. any tips?

[svirfnebli]

Salute Brethren,

I am in the process of rebuilding my precious Vermont Castings CF9050. I'm doing one hell of an overhaul and I will post pics later. I've been able to source every part I need except one .. On the main fire box (The core of the grill) there are two side panels bolted with 1/4-20 bolts... between the firebox and the panel there was some insulation. It was about 1/16th or 1/8" thick. I cannot find this insulation to save my life. It looked like some sort of fiberglass or possibly a paper. Does anyone have a source or know where I can get this stuff?

Again, it's 1/16th or 1/8th inch thick insulation that can withstand at least 600 degrees farenhiet (sp?).

Svirf

 

[beam boys bbq]

http://www.zircarceramics.com/index2.htm

here is the stuff i used i bought the stuff that will withstand 1200deg

works well

york

 

[svirfnebli]

http://www.zircarceramics.com/index2.htm

here is the stuff i used i bought the stuff that will withstand 1200deg

works well

york

That looks like what I am looking for! Thanks VERY much. Was it the Alumina Paper you used?

 

[Mark]

rock wool

readily available & relatively cheap
http://www.naima.org/pages/resources/faq/faq_mineral.html