Brisket question please

[BPDC]

First one of the year today.... and I've only done a few last year when I just got my Louisianna Country Smoker.

I Can't recall the exact process I had learned on here....

At what temp should I wrap it in tin foil and let it finish out to 200 or so ?

Should I wrap it?

I have not been able to really keep my flat moist at all.... feels like it's always too dry and needs bbq sauce just for the moisture contribution.

Suggestions?

Thanks

 

[Trucky1008]

I usually wrap my briskets anywhere between 160-170. Some folks add liquid (like beef broth) when they wrap their briskets, I don't. I usually inject my briskets as well. I hope this helps.

 

[Will32Rod]

There is no right way or wrong way, some people wrap some do not. It is like fat side up or fat side down. Expeirment and see what works best for you and your pit.

I wrap mine at 160 with a liquid, usally apple juice or beef broth or both then probe with a toothpick about the 190 mark, when the toothpick goes in like it was soft butter then its done. Some briskets will be done at 190 some will have to go to 210 or even 220. Take out and wrap in a couple towels and put in a cooler for a couple hours to rest. Will soak back up a lot of moisture.
That is how I do mine.

 

[wormdrink67]

I'm doing one right now....just crossed the 180 mark. I wrapped at 160 with apple juice, getting ready to check with a tooth pick. Good luck to you.

 

[BPDC]

Thanks a million everyone.
I am just at 160 but I want it a bit darker so I'll go another hour or so and wrap it.

Thanks again !!!

 

[Skidder]

I do as Will does

 

[BPDC]

I was told to pull at 200 and wrap in towel and put in cooler for an hour.....

Is this too early or do people typically ONLY go by the tenderness feel of the meat ???

 

[gtr]

I was told to pull at 200 and wrap in towel and put in cooler for an hour.....

Is this too early or do people typically ONLY go by the tenderness feel of the meat ???

I've only ever gone by tenderness. Different briskets have differing amounts of collagens in them that need to render which is why you need to go by the feel. One may be ready at 200, one at 205, one maybe 195, etc. Rest 'em for at least an hour. I've only done a few but I think they've all turned out good due to paying attention to how they feel rather than what a thermometer says.

 

[MilitantSquatter]

agreed.... don't get stuck on temps.... learn to go by feel.

wrapping is subjective and a passionately debated subject. It can be used as a tool but it not necessary for a great brisket. Time, type of cooker, temp all are factors that must be considered.

I started w/o foil - had good briskets... began using foil for competion - had good briskets but were not my preference, and for the last few years post competition needs went back to not using foil and prefer the finished product once again.

 

[landarc]

I am with GTR and Vinny, totally by feel and then pull when the probe goes in easy. Foil, cooler and rest for an hour.

 

[Dallas Dan]

I don't go by temp but rather by time. I smoke it at 175-195 for around 12 hours, and then wrap it in heavy foil and slow cook for another 10-12 hours. At 12 hours into smoking, the brisket has a nice crust so it is no longing absorbing the smoke.

Always keep the fat side up so it keeps the meat moist.

 

[MilitantSquatter]

I don't go by temp but rather by time. I smoke it at 175 for around 12 hours, and then wrap it in heavy foil for another 10-12 hours. At 12 hours into smoking, the brisket has a nice crust so it is no longing absorbing the smoke.

Always keep the fat side up so it keeps the meat moist.

lots of ways to get a job done I guess... but just curious, have you ever tried increasing the temps ? just seems like a really long time, especially with the use of foil.

 

[1_T_Scot]

I don't go by temp but rather by time. I smoke it at 175-195 for around 12 hours, and then wrap it in heavy foil and slow cook for another 10-12 hours. At 12 hours into smoking, the brisket has a nice crust so it is no longing absorbing the smoke.

Always keep the fat side up so it keeps the meat moist.

Really the smoker temp 175-195? Hmmmm I've never smoked one for 24 hours. Maybe I should give it a try.

 

[Dallas Dan]

lots of ways to get a job done I guess... but just curious, have you ever tried increasing the temps ? just seems like a really long time, especially with the use of foil.

Yes, it is a long cook time. But I've found out thru trial and error this system has worked best for me. The brisket always turns out tender and great smokey (but not too smokey) flavor. Every time I've tried to up the temp and cook it faster, it never turned out as tender.

I also like that I can get it started on a Saturday late morning, wrap it in heavy foil (double wrap is best) just before we go to bed, and it's ready anytime we want on Sunday afternoon or evening.

 

[martyleach]

I was told to pull at 200 and wrap in towel and put in cooler for an hour.....

Is this too early or do people typically ONLY go by the tenderness feel of the meat ???

Tenderness, only!! Different briskets will be done at different temps. Your probe should slide in like it's going into soft butter.

 

[Three porks]

You mention going from smoker to wrapped towel then Into a cooler, I do exactly that but usually let the Brisket sit on the counter, foil open to allow venting some of the heat energy. I do this for at least 30 minutes then it goes into the cooler. If there is no fluid present, ill add some broth, during the resting process, I believe this moisture will be absorbed thus rendering a moist product. Ever since I started doing this I havnt had a bad Brisket yet. Just my 2 cents.

Sent from my ADR6300 using Tapatalk

 

[barbefunkoramaque]

http://www.bbq-brethren.com/forum/showthread.php?t=102415