MMMM.. BRISKET..
The BBQ BRETHREN FORUMS.  



Our Homepage Donation to Forum Overhead Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Amazon Affiliate
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking.


Reply
 
Thread Tools
Old 04-12-2008, 04:48 PM   #1
Kevin Garceau
On the road to being a farker
 
Join Date: 03-22-08
Location: Mauston, Wi
Default Hi-temp white?

Anyone see/use/know of a good hi temp white paint that will stand up to UDS heats?

I have an idea, I realize it will get dirty and all of that good stuff...... just got something in the works.

if this dude with the drums EVER gets a hold of me - I had planned to be cooking instead im on here with all you goofs! Looking at food pron.
Kevin Garceau is offline   Reply With Quote




Old 04-12-2008, 04:51 PM   #2
BBQ Grail
somebody shut me the fark up.
 
BBQ Grail's Avatar
 
Join Date: 08-11-03
Location: Rocklin, CA
Default

I saw hi temp white paint at the local auto parts store. That's where I would check.
__________________
Larry

I am no longer captious...so bite me Shane.

The best way to reach me is with email: larry@larrygaian.com
BBQ Grail is offline   Reply With Quote


Old 04-12-2008, 04:54 PM   #3
CaptGrumpy
is one Smokin' Farker

 
Join Date: 03-03-08
Location: Sacramento, CA
Default

Check your local fireplace/woodstove shops. That is where I buy my paints.
__________________
[SIZE=3][COLOR=black][B][U]Team Grumpy[/U][/B][/COLOR][/SIZE]

[COLOR=red]Red Thermapen & Red Guru DigiQII[/COLOR]

[COLOR=darkgreen]Large Big Green Egg[/COLOR] [SIZE=1][COLOR=yellowgreen]adopted 25MAR08[/COLOR][/SIZE]
[COLOR=darkgreen]Small Big Green Egg[/COLOR] [SIZE=1][COLOR=yellowgreen]adopted 01JUN08[/COLOR][/SIZE]
CaptGrumpy is offline   Reply With Quote


Old 04-12-2008, 04:54 PM   #4
Kevin Garceau
On the road to being a farker
 
Join Date: 03-22-08
Location: Mauston, Wi
Default

Yeah I have seen it, been around it, just wondering if it will hold up. I have options to powdercoat, but trying to avoid that if i can.
Kevin Garceau is offline   Reply With Quote


Old 04-12-2008, 05:03 PM   #5
Dr_KY
Quintessential Chatty Farker
 
Dr_KY's Avatar
 
Join Date: 12-15-07
Location: England
Default

What sort of heat are you planing on?
__________________
www.drsweetsmoke.com

Slappin that bass like some delerious funky preist!!!


UDS, Half Pint (Mini UDS), Weber, ProQ 20, Kegrilla
*250 gallon cooker- 'The Meat Beast!!'*


British BBQ Championships
Grand Champion 2008
~~~~
British BBQ Society - Southern Championship
Grand Champions 2009
Dr_KY is offline   Reply With Quote


Old 04-12-2008, 05:05 PM   #6
CaptGrumpy
is one Smokin' Farker

 
Join Date: 03-03-08
Location: Sacramento, CA
Default

Quote:
Originally Posted by Kevin Garceau View Post
Yeah I have seen it, been around it, just wondering if it will hold up. I have options to powdercoat, but trying to avoid that if i can.
Powdercoat comesin varying temp ranges and we have one place here in Sacramento that does 1800 degree powder coat and that is what I would look for if going that route although it is pricy and you will probably only be able to get flat black. Anything less will just melt off and create a farkin' headache for you.
__________________
[SIZE=3][COLOR=black][B][U]Team Grumpy[/U][/B][/COLOR][/SIZE]

[COLOR=red]Red Thermapen & Red Guru DigiQII[/COLOR]

[COLOR=darkgreen]Large Big Green Egg[/COLOR] [SIZE=1][COLOR=yellowgreen]adopted 25MAR08[/COLOR][/SIZE]
[COLOR=darkgreen]Small Big Green Egg[/COLOR] [SIZE=1][COLOR=yellowgreen]adopted 01JUN08[/COLOR][/SIZE]
CaptGrumpy is offline   Reply With Quote


Old 04-12-2008, 05:07 PM   #7
Kevin Garceau
On the road to being a farker
 
Join Date: 03-22-08
Location: Mauston, Wi
Default

Im just looking for a white that will hold up on the outside of my UDS.
Kevin Garceau is offline   Reply With Quote


Old 04-12-2008, 06:36 PM   #8
smoke-n-my-i's
is One Chatty Farker
 
smoke-n-my-i's's Avatar
 
Join Date: 08-27-07
Location: Eustis, FL
Default

Check auto parts house or a good paint store. It is out there....
__________________
KCBS Member
Smoke-N-My-I's Competition BBQ Team
2 Chargriller SuperPros with SFB's(retired)
2 UGLY drum smokers
Weber 22 1/2" & 18 1/2" Kettle
Super fast RED Thermapen
Screaming fast ORANGE Thermapen
KCBS Certified Table Captain
KCBS Certified Judge
smoke-n-my-i's is offline   Reply With Quote


Old 04-12-2008, 06:41 PM   #9
chibi
Full Fledged Farker
 
chibi's Avatar
 
Join Date: 06-14-06
Location: ftcollins,Co
Default

Do you have an Ace hardware around you? I have seen many different colors of hi-temp paint there.
__________________
CHIBI-Q comp team.

Vertical insulated charcoal dropping clone.
Homemade offset.
Traeger LilTex for winter cheating.
<><

Remember when you get in the
storms of life that's when you have to learn to dance in the rain.
chibi is offline   Reply With Quote


Old 04-12-2008, 06:44 PM   #10
smoke-n-my-i's
is One Chatty Farker
 
smoke-n-my-i's's Avatar
 
Join Date: 08-27-07
Location: Eustis, FL
Default

http://net4sale.com/Shop/pc/viewPrd....&idproduct=121

Alvin Products Andover White High Heat Automotive Spray Paint

12 oz. Aerosol Spray Can

Alvin Products High Heat Automotive Spray Paint withstands continuous temp's to 1200°F. Also available in a variety of colors in 12 oz. spray cans, and in a one-pint brushable black version.


Midway Auto parts store

PLASTIKOTE HIGH-TEMP PAINT 12 OZ. CAN, WHITE (HP12)



Resists Temperatures up to 1500°F. Forms a Hard, Lasting Finish that will not Burn Off, Chip or Peel. Ideal for use on Headers, Exhaust Manifolds, or any Surface Exposed to Very High Heat.


http://www.midwayautosupply.com/show...iliateid=10050

TRUE VALUE Hardware store

http://www.idealtruevalue.com/servlet/the-158474/Detail

If you have an Ace Hardware close by, you might even want to check them out...

Bill
__________________
KCBS Member
Smoke-N-My-I's Competition BBQ Team
2 Chargriller SuperPros with SFB's(retired)
2 UGLY drum smokers
Weber 22 1/2" & 18 1/2" Kettle
Super fast RED Thermapen
Screaming fast ORANGE Thermapen
KCBS Certified Table Captain
KCBS Certified Judge
smoke-n-my-i's is offline   Reply With Quote


Old 04-12-2008, 07:45 PM   #11
cedstevo
Knows what a fatty is.
 
Join Date: 01-21-08
Location: inman Sc
Default

I saw some hi temp white and almond spray paint in Lowes the other day, $4.58 a can.
cedstevo is offline   Reply With Quote


Old 04-12-2008, 09:34 PM   #12
Hook_Line_and_Sinker
is One Chatty Farker
 
Join Date: 03-28-08
Location: Downey, California
Default

also duplicolor engine enamel and high heat paints are at the auto stores and some hardware stores
__________________
Hook Line and Sinker

Viking 30 inch Gravity Fed Charcoal Smoker
Brinkmann 5 burner gas grill with sear & rotisserie
UDS's 3 and growing
Char Griller w/SFB w/mods
Orion Cooker
Charbroil 7000 Gas Grill
Hook_Line_and_Sinker is offline   Reply With Quote


Old 04-12-2008, 10:42 PM   #13
swamprb
somebody shut me the fark up.
 
swamprb's Avatar
 
Join Date: 10-27-06
Location: Bothell WA
Default

Take a look at JD's UDS, The same thing happened to one of mine and I used Hi-Temp BBQ black.
http://www.bbq-brethren.com/forum/sh...43&postcount=1

The bottom third of the drums gonna get the most heat, don't leave the lid off and this won't happen.
I have had great success with the Dupli-Color Engine enamel even though its rated @600*

Stove-Brite makes an enamel Hi-Temp paint, I've only seen it in Stove shops and its @ $14+ a can
__________________
Brian - Left Hand Smoke BBQ PNWBA 2010 Team of the Year
BGE's/WSM's/Pellet Pro WSM/BWS Gater/BDS Clones/Cookshack 008/Weber Performer w EZ-Que/Cajun Bandit/Rib-O-Lator Test Pilot/La Caja China/BBQ Guru/Weber 1000 RK Drum Coffee Roaster
Follow Left Hand Smoke on Facebook!http://www.facebook.com/pages/Left-H...462391?sk=wall
KCBS CBJ/PNWBA CBJ www.pnwba.com
swamprb is offline   Reply With Quote


Old 04-12-2008, 10:47 PM   #14
Bbq Bubba
somebody shut me the fark up.
 
Bbq Bubba's Avatar
 
Join Date: 05-03-07
Location: New Baltimore, Mi.
Default

Hey guys, iv'e done several cooks on my Sparty smoker painted with cheap off the rack paint including a high temp chicken cook....no problems!!
Save the money to get more drums!!
__________________
Owner and Chief Taco Builder @ The Wooden Valve
Beer Snob
I cook the #bestbrisketnorthoftexas. Get over it.
#detroitporkmafia
BBQ Person of the Year 2013
Bbq Bubba is offline   Reply With Quote


Old 04-13-2008, 08:11 AM   #15
ssbbqguy
is one Smokin' Farker
 
Join Date: 10-09-07
Location: carthage,mo.
Default

the barrel smokers we make have a firebrick option,which most use. We also pre-burn and season all smokers that leave here, customer option of which wood taste they start with. With firebrick and patio stone on bottom, most auto paints will work. If no bricks, Duplicolor auto high heat, many colors, will work fine. Remember it is the paint on the inside that you want to be sure is gone, good luck.
ssbbqguy is offline   Reply With Quote


Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dome temp versus grill temp scp Q-talk 3 01-22-2012 06:52 PM
Confused about UDS dome temp vs. grate temp. caliking Q-talk 3 10-15-2011 05:39 PM
White, white, white, wezza ona Weber! Mark R Q-talk 20 09-11-2011 08:05 PM
Dome Temp on a Weber Kettle vs Actual Cooking Grate Temp Sunra Q-talk 10 01-25-2010 02:17 PM
UDS Dome temp 180 can't get temp up or down Hook_Line_and_Sinker Q-talk 13 05-19-2008 09:19 AM

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Forum Custom Search: Enter your Search text below. GOOGLE will search ONLY the BBQ Brethren Forum.
Custom search MAY not work(no display box) in some configurations of Internet Explorer. Please use compliant version of Firefox or Chrome.







All times are GMT -5. The time now is 10:51 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.
no new posts