curing chamber

c farmer

Babbling Farker
Joined
Jun 13, 2013
Messages
3,881
Reaction score
2...
Points
0
Location
pa
I am going to build a curing chamber.

Thinking of a over/ under fridge.



If you kind folks would share some info and pics of yours I would appreciate it?
 
Well you are the cure master.

I think Shagdog and company built one. good luck.
 
Yours both look great Shagdog and Marty!
I am in the middle of putting one together based on Sam3's wine cooler curing chamber.
Have had unbelievable obstacles tripping me up (personal) or it would have been build months ago. :tsk::-D
Looking forward to seeing what you build Adam!
 
I opted for a freezer so with a temp controller so I can use the freezer as a freezer or refriderator as well as a drying cabnet. You can get all plug-n-play components too.

Temp controller
Johnson Controls Digital Thermostat Control Unit - A419ABG-3C
by Johnson Controlshttp://www.amazon.com/Johnson-Controls-Digital-Thermostat-Control/dp/B00368D6JA/ref=pd_sxp_f_pt

Humidity...I've seen this cheaper so look around a bit
[ame="http://www.amazon.com/HUM-1-Hydroponic-Humidity-Dehumidifier-Controller/dp/B004CMOFBC"]Amazon.com : NEW C.A.P HUM-1 Hydroponic Climate Humidity Dehumidifier Controller w/ 2 Outlets : Hvac Controls : Patio, Lawn & Garden@@AMEPARAM@@http://ecx.images-amazon.com/images/I/41MZYatoTFL.@@AMEPARAM@@41MZYatoTFL[/ame]

Go to wally world and get an ultrasonic humidifier, reason for ultrasonic is that it has no PITA filter to change.

Lookin forward to your products!
 
Mine is basically the same set up as the infamous Richard as far as the electronics go. I recently upgraded to a full size fridge and it was nice just moving the box with all the electronics from one spot to another and being done with it.

I have not taken a pic, but on the big fridge, I cut a hole and put a dryer vent flap on it with a computer fan behind hit. Been working great for air circulation and keeping the humidity down where I want it.
 
Back
Top