Our Homepage | Donation to Forum Overhead | Welocme | Merchandise | Associations | Purchase Subscription | Amazon Affiliate |
|
Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking. |
|
Thread Tools |
12-13-2015, 08:52 PM | #1 |
is one Smokin' Farker
Join Date: 07-09-12
Location: Maquoketa, IA
Name/Nickname : Ron
|
Rope Gasket Replacement?
My Rebel Smoker is leaking a bit by the firebox and charcoal shut and want to replace the gasket. I found some rope gasket at Menards, but it feels softer and not sure what the diameter should be.
Can anyone point me in the right direction? Thanks, Ron
__________________
Ron <XXX>< Weber 18,22,26 Weber Summit Gasser MAK 2 Star General |
|
12-13-2015, 09:24 PM | #2 |
Babbling Farker
Join Date: 05-19-11
Location: EAD
|
Looks like P-gasket or also called tadpole gasket. Do you see screws holding a plate on?
|
|
12-13-2015, 09:25 PM | #3 |
Babbling Farker
Join Date: 05-19-11
Location: EAD
|
Honestly that gasket looks pretty good still. Did you try tightening the latches?
|
|
12-13-2015, 09:32 PM | #4 |
Babbling Farker
Join Date: 08-11-13
Location: Rayville , Missouri
Name/Nickname : BBQ Mojo
|
on my Stump's it had gaskets like that and all you do is massage them out after each use and they will work great for many years . if you need that kind Stump's Smoker sell it by the foot .
__________________
Weber Kettle Luke's Firepits / Grill Lone Star Grillz Mini Insulated Cabinet Smoker |
|
12-14-2015, 09:30 AM | #5 | |
is one Smokin' Farker
Join Date: 07-09-12
Location: Maquoketa, IA
Name/Nickname : Ron
|
Quote:
That one leaks a bit but massaging it may bounce it back and will try it. The top of the chute leaks pretty bad and is crusty from the moisture baking into it. Tightening the lid has not helped, but a temp cardboard gasket got me through the cook. I was able to dig up Jeff's number that built the smoker and he hooked me up with instructions and where to get the gasket. It is a tadpole 5/8" x 1.5" http://www.mcmaster.com/#tadpole-gaskets/=108hv64
__________________
Ron <XXX>< Weber 18,22,26 Weber Summit Gasser MAK 2 Star General |
|
|
Thread Tools | |
|
|