BMar
Well-known member
Hey guys, I started building a UDS and shortly thereafter stumbled on this forum...gave me a lot of great ideas which I tried to incorproate into my design. Charcoal basket is made from the charcoal grate of a 22.5" weber with 3/4" expanded metal welded to the rim, also found a salvage steel pan and welded a lip around the outside with a 1/2" pipe in the middle as my ash pan. Not getting quite the seal I want at the lid and am running with cheap gauges at the moment, but improvements will come in the following months. All in all, very happy with the build and thanks to the knowledge of everyone on this forum, it turned out much better than my original design