Would you pay $200 for a used Globe Chefmate GC10 slicer?

B3 · 12-02-2011, 03:05 PM

Brethren,

I found a used Globe Chefmate GC10 slicer that the seller wants $200 for. I've been looking for a slicer for a while and I feel like this is the deal I've been waiting for. Assuming it's in as good of condition as the seller states, are there any pitfalls on this slicer that I'm missing?

If I go check it out, I'll make sure it runs smooth and that there isn't any general damage. What else should I be looking for?

Thanks in advance.

Midnight Smoke · 12-02-2011, 03:07 PM

I know nothing about that unit but sure would check into it for the price.

B3 · 12-02-2011, 03:15 PM

I owe thanks to your recent slicer thread. It reminded me to check local listings again (because I hadn't for a while). So thanks Terry!

CockedandLocked · 12-02-2011, 03:22 PM

$200 for a$1000 slicer ? uh ..... yeah, if it checks out mechanically

aquablue22 · 12-02-2011, 03:28 PM

I'd say 200 bucks or a little lower would be a goos deal, if it's clean....You can usually tell if they have been taken care on first viewing.

jestridge · 12-02-2011, 04:14 PM

I ggogle it should be weel worth the money . BTW you also can down load the owner manual on it,

Pyle's BBQ · 12-02-2011, 04:28 PM

Make sure the sharpening stone are in good condition. The blade should not have any nicks in it. Pull all the guards and see if it has been cleaned. Check for all the knobs that hold the guards on. That is a great price. I found the same slicer on line for $697.

B3 · 12-02-2011, 09:12 PM

Quote:

Originally Posted by aquablue22

I'd say 200 bucks or a little lower would be a goos deal, if it's clean....You can usually tell if they have been taken care on first viewing.

That's what I was thinking... If I show up and it looks brand new, I'll be all over it. I think it will depend on the condition.

Thanks guys.

12-02-2011, 03:05 PM	#1
B3 On the road to being a farker Join Date: 08-31-09 Location: Columbus, OH	Would you pay $200 for a used Globe Chefmate GC10 slicer? Brethren, I found a used Globe Chefmate GC10 slicer that the seller wants $200 for. I've been looking for a slicer for a while and I feel like this is the deal I've been waiting for. Assuming it's in as good of condition as the seller states, are there any pitfalls on this slicer that I'm missing? If I go check it out, I'll make sure it runs smooth and that there isn't any general damage. What else should I be looking for? Thanks in advance.

12-02-2011, 03:07 PM	#2
Midnight Smoke somebody shut me the fark up. Join Date: 01-24-08 Location: Southern Arizona Desert	I know nothing about that unit but sure would check into it for the price. __________________ ************************ * Terry ~ aka Pork Smoker * XL-BGE Hatched 06/20/2008 09:42 pm ** * Couple Weber Kettles, CharGriller, UDS * * Ultra Fast Red Thermapen * Projects Kamado Restoration Bandera Restoration

12-02-2011, 03:28 PM	#5
aquablue22 Babbling Farker Join Date: 11-26-08 Location: Ormond Beach, Florida	I'd say 200 bucks or a little lower would be a goos deal, if it's clean....You can usually tell if they have been taken care on first viewing. __________________ Weber Spirit E-310 Gasser 1 - Big Green Egg - Large 2 - 22.5 Weber Kettles 2 - 18.5 Weber Kettle 1 - WSM Mini I live in fear that my Wife will sell all my "TOYS" when I die for WHAT I told her I paid for them!!

12-02-2011, 04:28 PM	#7
Pyle's BBQ Babbling Farker Join Date: 10-25-06 Location: Madrid, IA	Make sure the sharpening stone are in good condition. The blade should not have any nicks in it. Pull all the guards and see if it has been cleaned. Check for all the knobs that hold the guards on. That is a great price. I found the same slicer on line for $697. __________________ Bryan, Team: Pyle's BBQ Yoder YS640; Good-One "Trail Boss" 60T; Weber Kettle rotisserie ring; Big A$$ Rotisserie; New Braunfels offset smoker; Weber Smokey Mountain; Backyard Bombers BBQ HJM Μολὼν λαβέ

12-02-2011, 03:15 PM	#3
B3 On the road to being a farker Join Date: 08-31-09 Location: Columbus, OH	I owe thanks to your recent slicer thread. It reminded me to check local listings again (because I hadn't for a while). So thanks Terry!

12-02-2011, 03:22 PM	#4
CockedandLocked Knows what a fatty is. Join Date: 06-28-10 Location: Sherman TX	$200 for a$1000 slicer ? uh ..... yeah, if it checks out mechanically

12-02-2011, 04:14 PM	#6
jestridge somebody shut me the fark up. Join Date: 12-28-07 Location: annville ky	I ggogle it should be weel worth the money . BTW you also can down load the owner manual on it,