BIG_DEANS_QUE
Knows what a fatty is.
So im looking for a step by step and best/cheapest way to add a DigiQ to my UDS anyone have any links??
Anyone Have a step by step for adding a DigiQ
- Thread starter BIG_DEANS_QUE
- Start date
qndummy
Knows what a fatty is.
The only special accessory you need to install it is the fan adaptor. BBQ Guru should be able to tell you which one would be best suited for a UDS. For my WSM I used the standard adaptor and cut a hole to mount it below the charcoal grate. I mounted the DigiQ mounting bracket to the side and drilled 3 holes for eyelets for the probes. Took less then an hour. Hope this helps.
JiveTurkey
is one Smokin' Farker
I have the DigiQII for my UDS. I put a large BGE vent on my drum so I got the BGE adaptor. Works like a charm. For cheapest way, I would say just get the bulkhead adaptor and you're set.
Step by step:
1. Build a uds
2. Order Guru with bulkhead
3. Install bulkhead
4. Read the manual that comes with the guru
5. Bon Appetite
Step by step:
1. Build a uds
2. Order Guru with bulkhead
3. Install bulkhead
4. Read the manual that comes with the guru
5. Bon Appetite
