Brisket Injection

Plowboy · Nov 28, 2006

This is really a comp question, which is why I put it in Comp BBQ.

I like the idea of injecting a brisket for comp, but you can see the injection sites when slicing. The slices taste great, but look terrible. Thoughts or tips?

Jorge · Nov 28, 2006

Plowboy said:
This is really a comp question, which is why I put it in Comp BBQ.

I like the idea of injecting a brisket for comp, but you can see the injection sites when slicing. The slices taste great, but look terrible. Thoughts or tips?

ARe you talking about physical marks from the needle, or stained meat?

The_Kapn · Nov 28, 2006

Todd,

Don't use an injection that stains, like with a lot of Soy Sauce.
Inject with the grain as much as possible.
Inject SLOW to allow the fluid to migrate.
Don't inject a "quick shot" and move away. Inject as much in one area (slowly) as it will accept, then move away some for the next load.

If heavily injected, place in pan in frig overnight to catch the liquid that leaks out. And it will if really loaded,

If you are serious about competition, invest in a brine pump.
Now, "That is an injector" to borrow from Dundee :lol:
Do a search, it has been discussed several times.

Never ever been a problem except the one time I injected soy into a turkey breast :lol:

TIM

Moderator note:
As to being comp specific?
We will leave this here for a day or two to get the comp perspective. But, we inject in "recreational" que also.

cmcadams · Nov 28, 2006

Flip the brisket every hour or so to help distribute the injection.

Plowboy · Nov 28, 2006

I'm not concerned about staining. I know how to avoid that. It is the physical marks in the meat that I'm concerned about. I'll try the "with the grain" approach and see if I can avoid issue.

Randy has a hog sirenge that we use at comp. Has a pistol grip handle and holds a lot of fluid. I'll have to get a picture someday.

YankeeBBQ · Nov 28, 2006

Plowboy said:
I'm not concerned about staining. I know how to avoid that. It is the physical marks in the meat that I'm concerned about. I'll try the "with the grain" approach and see if I can avoid issue.

Randy has a hog sirenge that we use at comp. Has a pistol grip handle and holds a lot of fluid. I'll have to get a picture someday.

Like this ?

This is what I use. Works great. I don't get any visible holes in the meat. Which needle are you using ? I use the one with multiple holes in it.

ique · Nov 28, 2006

Plowboy said:
I'm not concerned about staining. I know how to avoid that. It is the physical marks in the meat that I'm concerned about. I'll try the "with the grain" approach and see if I can avoid issue.

Randy has a hog sirenge that we use at comp. Has a pistol grip handle and holds a lot of fluid. I'll have to get a picture someday.

With the grain works well, you can also try using a smaller gauge needle.

MilitantSquatter · Nov 28, 2006

I agree with Chris.. Check the thickness of the needle you are using... They can vary greatly. IToo thick a needle could easily spread the muscle fibers too far apart and make it difficult to close the gap to a less noticeable level as the internal temp is raised.

SmokeInDaEye · Nov 28, 2006

YankeeBBQ said:
Like this ?

This is what I use. Works great. I don't get any visible holes in the meat. Which needle are you using ? I use the one with multiple holes in it.

Whoa! I think my Christmas wish list just got a little longer! Where'd I find something like that?

YankeeBBQ · Nov 28, 2006

SmokeInDaEye said:
Whoa! I think my Christmas wish list just got a little longer! Where'd I find something like that?

I bought mine at alliedkenco.com but you can also get them at sausagemaker.com or from a vetrinary supply catalog. The one I saw in the vet catalog actually came with an extra barrel which I thought was nice.

Plowboy · Nov 28, 2006

YankeeBBQ said:
Like this ?

This is what I use. Works great. I don't get any visible holes in the meat. Which needle are you using ? I use the one with multiple holes in it.

Similar, but a different design.

ultramag · Nov 28, 2006

I gotta have one of those. Used for intended purposes but never thought about using it for an injector.

Plowboy · Nov 28, 2006

Here's what we have.
http://www.qcsupply.com/Products/280.aspx

chad · Nov 28, 2006

I see that they are around $50.00 (give or take a bit) and that they only hold a couple of ounces per load...still, the measured delivery is nice.

I still like my brine pump with hose that I got from www.butcher-packer.com. I sometimes inject copious amounts of pork or brisket and large volume pump lets me mix gallons of injection. Granted, it is $135.00 but has been worth every penny.

However, these measure dose injectors are really nice and would definately serve most of the brothers needs really well.

Plowboy · Nov 28, 2006

chad said:
I see that they are around $50.00 (give or take a bit) and that they only hold a couple of ounces per load...still, the measured delivery is nice.

I still like my brine pump with hose that I got from www.butcher-packer.com. I sometimes inject copious amounts of pork or brisket and large volume pump lets me mix gallons of injection. Granted, it is $135.00 but has been worth every penny.

However, these measure dose injectors are really nice and would definately serve most of the brothers needs really well.

Its a matter of scale. For 2-4 butts per comp, what we have works great. Better than the small cajun injector size.

HoDeDo · Nov 28, 2006

Mine was a gift. It is this one:
http://www.sausagesource.com/catalog/ce-meterinj.html
Code: CE-METERINJ
Price:$64.84

It comes with two needles. One with dispersed holes for even distrobution, and one with an open tip (pictured) perfect for injecting pastes/chunky marinades.

Plowboy · Nov 28, 2006

HoDeDo said:
Mine was a gift. It is this one:
http://www.sausagesource.com/catalog/ce-meterinj.html
Code: CE-METERINJ
Price:$64.84

View attachment 4384

It comes with two needles. One with dispersed holes for even distrobution, and one with an open tip (pictured) perfect for injecting pastes/chunky marinades.

Wonder if you can get replacement needles.

Jeff_in_KC · Nov 29, 2006

Andy, how long are the needles on that model? I'd like to find one 8 inches or so to allow for drawing it out a long distance while injecting... less holes in the meat.

Jorge · Nov 29, 2006

Jeff_in_KC said:
Andy, how long are the needles on that model? I'd like to find one 8 inches or so to allow for drawing it out a long distance while injecting... less holes in the meat.

Try a veterinary supply house.

Plowboy · Nov 29, 2006

With this thread, I finally understand what I saw Bar B Quau doing with his whole hog in Des Moines two years ago. He had like 25 of those smaller Cajun Injection style syringes stuck in his hog. He'd come out every 15 minutes or so and give each one a little push. Took him forever to finish one syringe of his injection.

I understand now that he was likely trying to let the marrinade soak into the meat while disturbing the fibers as little as possible. Hmmmmm....

Brisket Injection

somebody shut me the fark up.

somebody shut me the fark up.

Moderator Emeritus

Quintessential Chatty Farker

somebody shut me the fark up.

is Blowin Smoke!

is One Chatty Farker

Moderator

SmokeInDaEye

Guest

is Blowin Smoke!

somebody shut me the fark up.

Full Fledged Farker

somebody shut me the fark up.

Attachments

somebody shut me the fark up.

somebody shut me the fark up.

Babbling Farker

somebody shut me the fark up.

somebody shut me the fark up.

somebody shut me the fark up.

somebody shut me the fark up.

Similar threads