smooookin
is Blowin Smoke!
I have access to some old casing, this stuff is 24 in diameter and darn close to ½ inch thick! I am figuring once you get it to temp you could maintain it with a bic lighter.
The plans in my head call for a four foot cooking chamber and a 2 ft fire box. My original Idea to pipe the heat/smoke via a piece of box channel with a series of holes going from smaller to larger as the distance increases from the firebox. Obviously I will need a counter weight system for the single door, a trailer and maybe a ¾ ton to pull it. LOL
So, is ½ in too thick? The smaller thickness is smaller diameter so it wont work. oh yeah i forgot to mention i can get it for 25 or 30 dollars a foot. i haven bought steel like this but i am thinking it is a good price even after i sand blast it. thoughts?
The plans in my head call for a four foot cooking chamber and a 2 ft fire box. My original Idea to pipe the heat/smoke via a piece of box channel with a series of holes going from smaller to larger as the distance increases from the firebox. Obviously I will need a counter weight system for the single door, a trailer and maybe a ¾ ton to pull it. LOL
So, is ½ in too thick? The smaller thickness is smaller diameter so it wont work. oh yeah i forgot to mention i can get it for 25 or 30 dollars a foot. i haven bought steel like this but i am thinking it is a good price even after i sand blast it. thoughts?