bbqgeekess
Babbling Farker
I built a firewood rack just the right size for 1/2 rick of wood. It's 4 feet wide, 4 feet tall and 16 inches deep.
It was made using three cinder blocks, six 2x4's, three cedar fence pickets and about $5 worth of screws and nails. Total cost was around $30 (including all wood, blocks & screws).
The drew up the plan in Google Sketchup--which I'll gladly share with anyone if they want the file.
The rack's base and sides are based off a plan I saw for a firewood rack online--except I went with cinder blocks for feet instead. I then added an upper level--lined with cut cedar pickets--to hold small pieces of wood, kindling & wood chunks.
It is sitting under the eaves of my house right now. I bought a tarp for $5 from harbor freight in case I need to cover it. I am new to firewood storage so this will be a learning experience. I'll keep the tarp off the wood on days it isn't raining to make sure it has adequate airflow to prevent mold, etc..
I plan on fabricating a sloped roof for it that I can just sit on top of it at a later date. I might move the rack and wood away from the house. Right now it isn't touching it though--closest a split is to the house is about 3/4 of an inch.
Just thought I'd share in case anyone is interested in the design of it, or can offer me any suggestions. Thanks.
It was made using three cinder blocks, six 2x4's, three cedar fence pickets and about $5 worth of screws and nails. Total cost was around $30 (including all wood, blocks & screws).
The drew up the plan in Google Sketchup--which I'll gladly share with anyone if they want the file.
The rack's base and sides are based off a plan I saw for a firewood rack online--except I went with cinder blocks for feet instead. I then added an upper level--lined with cut cedar pickets--to hold small pieces of wood, kindling & wood chunks.
It is sitting under the eaves of my house right now. I bought a tarp for $5 from harbor freight in case I need to cover it. I am new to firewood storage so this will be a learning experience. I'll keep the tarp off the wood on days it isn't raining to make sure it has adequate airflow to prevent mold, etc..
I plan on fabricating a sloped roof for it that I can just sit on top of it at a later date. I might move the rack and wood away from the house. Right now it isn't touching it though--closest a split is to the house is about 3/4 of an inch.
Just thought I'd share in case anyone is interested in the design of it, or can offer me any suggestions. Thanks.