Hinge Grease on a Sitck Burner

BBQ Freak · Dec 10, 2017

what do you guys use for grease on the sealed hinges on your stick burner ? I have heard some people say to use a food grade grease but since the hinges are on the outside I figured any high temp grease would be fine .

Beentown · Dec 10, 2017

I use high temp.

Sent from my SM-G950U using Tapatalk

BBQ Freak · Dec 10, 2017

Beentown said:
I use high temp.

Sent from my SM-G950U using Tapatalk

high temp food grade or a high temp automotive grease ?

Stlsportster · Dec 10, 2017

Food grade mineral oil. Use it to shine clean polish the smoker and works great on the hinges too!

BBQ Freak · Dec 10, 2017

Stlsportster said:
Food grade mineral oil. Use it to shine clean polish the smoker and works great on the hinges too!

but these hinges that take grease not oil , the oil would just run out .

Westx · Dec 10, 2017

Jeff I have the same hinges on my Humphrey's and when I change the seal on the doors, they come off, I spray with some Teflon based lube. Never had a problem. I am gussied you could do the same with the Shirley. You could also take the grease fittings out and pour some Mineral oil in them.

Beentown · Dec 10, 2017

BBQ Freak said:
high temp food grade or a high temp automotive grease ?

I am a stickler for food grade in most cases but these hinges are outside and nowhere near food areas so I just use the high temp that I use for my machinery. Tubes of food grade only run $20 buy then you'd need a seperate gun too....

Now my food processors, slicers, etc get food grade.

Sent from my SM-G950U using Tapatalk

Hinge Grease on a Sitck Burner

BBQ Freak

Babbling Farker

Beentown

is Blowin Smoke!

BBQ Freak

Babbling Farker

Stlsportster

Babbling Farker

BBQ Freak

Babbling Farker

Westx

is Blowin Smoke!

Beentown

is Blowin Smoke!

Similar threads