The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (https://www.bbq-brethren.com/forum/index.php)
-   Q-talk (https://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   My First Brisket (https://www.bbq-brethren.com/forum/showthread.php?t=276583)

PapasSmokin 10-30-2019 11:28 AM

My First Brisket
 
I've been smoking and grilling a long time but have never tackled a brisket. Are Sam's briskets good? Where else is a good source?
I'm smoking on a Treager Pro Series 36. Would love tips and tricks for a delicious fall apart tender brisket.
Thanks, Papa Smokin!

grillinguy247 10-30-2019 11:34 AM

When you pick a brisket look for one with a thick flat and good marbling. I always cook prime now but if you know how to cook them any grade can be delicious. Only use temperature as a guide to start checking for probe tender which is room temperature butter in the thickest part of the flat. Let us know how it goes once you tackle you first one! :becky:

Big George's BBQ 10-30-2019 11:38 AM

There are lots of Brisket threads here Check them out
For your first one I would not buy a real expensive cut of meat
When done you want it to bend over your finger but have a little tug when you pull on it
It is done when you can put a probe in it and it goes in like it was butter
I am sure others will chime in
Check a tutorial by Bigabyte on Brisket

sleebus.jones 10-30-2019 01:00 PM

Quote:

Originally Posted by PapasSmokin (Post 4241094)
Would love tips and tricks for a delicious fall apart tender brisket.
Thanks, Papa Smokin!

One of the most important tips: Keep goin'; Many people pull them off too early. Probe the thickest part of the flat until the probe goes in with no resistance. Cook at 275°. Use equal parts salt and pepper. Follow this and you'll have good results.

This doesn't happen by pulling the brisket off early (credit pjtexas1 for the brisket)
https://i.imgur.com/TwvE8Jbl.jpg

thirdeye 10-30-2019 01:15 PM

My Sam's Club always has USDA Choice briskets, and if you don't see what you like in the meat case ask, they always have more in the walk-in. They sometimes have USDA Prime (in a separate meat case with other Prime cuts) which are about 0.25/lb more, but worth it.

ronbrad62 10-30-2019 02:46 PM

https://www.bbq-brethren.com/forum/s...isket+tutorial
https://www.bbq-brethren.com/forum/s...ludawg+brisket
Here are a couple of links for you. These should give you greater knowledge than you have currently.

Mikhail 10-30-2019 03:48 PM

Good luck! It's not as intimidating as it seems. But like everyone here will tell you, don't cook to temperature, but to feel. Temp may tell you when it's time to try probing, but that's about all.

mchar69 10-30-2019 04:40 PM

Buy one that's floppy, not stiff.


All times are GMT -5. The time now is 06:24 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.