The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (https://www.bbq-brethren.com/forum/index.php)
-   Q-talk (https://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   Ugly Drum Smoker (https://www.bbq-brethren.com/forum/showthread.php?t=23436)

swamprb 09-03-2007 10:58 PM

Quote:

Originally Posted by ipls3355 (Post 455396)
With extension mod
Seasoning her right now. Put a couple thermos in to compare temps at different levels. Top is running a little hotter then bottom, but all are within 10 degrees.

My lid doesn't fit real well, I think because where I got the drums stores them stacked on their sides and slightly bent them.

http://home.mchsi.com/~rankin/UDS.jpg


That is very nice Chris! On my first drum prototype I had cut a section of another drum and it slid into one of the ribs of the main UDS, it was @ 44-45" tall and when I put it on the drum dolly it was just too big for me to work with, then I found the 38" drums-yours look to be about that tall without the sleeve? Nice job!

Brian

Brian in So Cal 09-04-2007 02:27 PM

Hey Swamprb,

Thanks for all the tips on the UDS, They came in handy.

sksmoker 09-04-2007 05:50 PM

This is the mother of all drum smoker threads. Holy cow!! I'll add my meager unit to the mix.

http://img264.imageshack.us/img264/807/p8261097qq6.jpg

Norcoredneck 09-04-2007 06:25 PM

Little tip for those that have trouble getting lid to seal. I distorted my drum when dumping it by doing the old trashman slam. I took the band used to seal drum and welded a cheap pair of vice grip clamp pliars and clamp it. Seals great.

Brian in So Cal 09-04-2007 06:42 PM

sksmoker, That is nice. What kind of paint did you use?

sksmoker 09-04-2007 06:45 PM

The red paint was on the drum already. The white paint for the lid was a high heat tremclad paint, for radiators, bbq's, and stoves. It is rated for 1200F.

BBQ101 09-08-2007 06:25 AM

Time to start shopping for parts Thanks guy's :mrgreen:

ipls3355 09-10-2007 07:51 AM

I smoked my jalepenos this weekend (sorry no pics). I completely dried them by smoking them at 180° for 24 hrs. Got up this morning and the UDS is still chugging along at 160°. Thats 30 hrs on about 15 lbs of Kingsford.

My concern is airflow. I had two pipes open to keep the temp at 180. I have three 1/2" nipples for intake and four 3/4" holes in the lid for exhast. Does this sound adequate?

jgh1204 09-10-2007 10:13 AM

Quote:

Originally Posted by sksmoker (Post 456094)
This is the mother of all drum smoker threads. Holy cow!! I'll add my meager unit to the mix.


Actually, it is the mother of all UDS threads. Not all drum smoker threads, but this where the UDS got its name from what I can tell. I don't think anyone was calling them UDS until I started this thread.

Q-Dude 09-11-2007 12:44 PM

Chris...I've seen other people in this thread talk about 3 1/2 inch holes in the bottom and 8 holes in the top. You might want to try adding a couple more top holes and see what happens.

I'm going to try building one of these myself, which will be a true adventure!

Thanks for the update on your jalapenos, I was kind of wandering how that turned out. I think the 180 degree heat level is perfect!

Craig

ipls3355 09-11-2007 01:41 PM

Quote:

Originally Posted by Q-Dude (Post 459908)
Thanks for the update on your jalapenos, I was kind of wandering how that turned out. I think the 180 degree heat level is perfect!

Craig

I was very impressed with the way it held the temperature and for how long. I lit 10-12 lbs of K saturday night at 10:00. It wasn't till Monday after work before is started losing steam. But I was surprised I had to keep it 2/3rds open to do so. I'll get it dialed in, I can tell I'm gonna love it.

^^I said 15 lbs before, but I checked the bag last night and it was close to half full still.

Dovid 09-11-2007 03:01 PM

Thanks Brian. So far, I am using three evenly spaced pavers.

Browser 09-12-2007 08:26 AM

UDS build question number one (of many I think!) from me, is there an accepted minimum diameter for the charcoal basket? I'm using a standard sized 45 gallon drum and I've got a 13" diameter propane cylinder which I'm thinking of cutting the bottom third off to make the coal ring, is this too small a diameter?

sksmoker 09-12-2007 01:37 PM

I believe the standard charcoal ring is 13"D x 6"H. I made mine 15"D x 9"H, but I think it may be too large based on the difficulty of controlling temps later on when the whole pile of charcoal gets going.

I have built another drum for a friend that uses a 12"D x 6"H and that person reports no trouble keeping constant temps.

Thawley 09-12-2007 02:22 PM

Mine is 11"D x 12"H and has a pretty good range of adjustability from 200-350*, but I haven't tried it below that...

I bought a 12" x 48" of expanded steel, cut 12" off for the bottom and used the remaining 36" for the ring. I don't know if the 12" is necessary, but its nice to have the capacity if I want to try 24-hr jerky or chipotles smokes...

http://farm2.static.flickr.com/1041/...1658cbed_o.jpg

http://farm2.static.flickr.com/1052/...557bc91302.jpg

http://farm2.static.flickr.com/1422/...071d805fe3.jpg


All times are GMT -5. The time now is 08:25 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
2003 -2012 BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.