The BBQ BRETHREN FORUMS.

The BBQ BRETHREN FORUMS. (https://www.bbq-brethren.com/forum/index.php)
-   Q-talk (https://www.bbq-brethren.com/forum/forumdisplay.php?f=5)
-   -   Ugly Drum Smoker (https://www.bbq-brethren.com/forum/showthread.php?t=23436)

blackdog043 03-20-2011 02:01 PM

Good Luck ^^^^^^^^^^

Drunken Monkey 03-20-2011 03:04 PM

Here's my first UDS. I stripped it down and painted it last weekend. Yesterday I seasoned it and I have some ribs on now.

http://i197.photobucket.com/albums/a...-20-11/251.jpg
http://i197.photobucket.com/albums/a...-20-11/252.jpg
http://i197.photobucket.com/albums/a...-20-11/261.jpg
http://i197.photobucket.com/albums/a...-20-11/263.jpg
http://i197.photobucket.com/albums/a...-20-11/275.jpg
http://i197.photobucket.com/albums/a...1/IMG_1864.jpg
Temporary therm placement.
http://i197.photobucket.com/albums/a...1/IMG_1865.jpg
http://i197.photobucket.com/albums/a...-20-11/276.jpg

Next weekend I'm adding eyelets for probes and a sliding door for the access to the charcoal basket.

cgarrit 03-21-2011 10:29 PM

2 Attachment(s)
The weather finally decided to dry up today so I took the opertunity to burn out the new project. The cool thing is I decided to shut of the air flow when it had about 3 inches of hot coals in the bottom. I wanted to see how long it would take to get cool from being so hot. 30 min people thats all it took for the drum to be cool to the touch. THAT IS AMAZING !!!!

ksblues 03-22-2011 09:10 PM

Pro BBQ Teams Cooking on a UDS?
 
Aside from Big Mista, I've not been able to find many -if any - Pro BBQ folks cooking at the competitive ($$) level on a UDS. Can anyone point me in the direction of those I'm missing?

pigwacker 03-23-2011 12:33 AM

UDS build in process
 
12 Attachment(s)
I'm not sure how many pages I have read on this thread, but they were all inspiring. So far I have one complete barrel that I've smoked ribs, brisket, sirloin roast, whole chicken and one of my favorites... bacon wrapped fingerling potatoes. I almost forgot, I made a couple of fatties as well. I think I have some pics somewhere and I'll try and add to the post.
Here's some pics and comments for my build.

Attachment 51165
This is a pic of the 1' square tubing that I welded to the disc. I welded a chain link to the top so that I can lift the whole basket/disc out of the barrel without spilling any ash.

Attachment 51166
This shows the basket that I welded together from flat-rolled expanded metal. I've made 5 baskets so far, the first two I wrestled into a circle using a come-along and allthread to pull the ends together. That was a pain! The other 3 were bent using the rosebud from the actylene torch to heat and bend the metal, that was pretty quick, but they aren't perfectly round or even close, but they work. Then I welded the raised-expanded metal (base) to the basket and cut a hole in the center of the base piece for the 1" square tubing to slide through.

Attachment 51167
This shows a basket with a burned load of briquets that I have dumped the ash from and am now dropping it down over the shaft on to the disc. (The discs were freebies, complements of a local dairyman; they ranged in diameter from 18-20".)

Attachment 51168
This pic shows the bottom of a disc, I welded three pieces of the square tubing to the bottom for feet. The disc acts as a heat shield, it catches all of the ash and fat drippings and it makes for a quick removal of the briquets and/or ashes. The bottom of the barrel stays pretty clean on the inside.

Attachment 51169
The baskets varied in diameter from 12-13" and in height from 12-14". I cut the shafts several inches longer than the baskets so that the chain link welded to the top of shaft was above the rim of the basket when it is set down on the disc.


Attachment 51170
I use fireplace poker to lift the disc/basket in and out of the barrel. I left the bottom of the basket square so that there is room for the ashes to drop. I didn't put any feet on the bottom of the basket to hold it up off of the disc.

Attachment 51171
I scored some free horseshoes from a cousin and welded one on each side for handles. I used the rosebud to heat them and hammered them to get the angle I wanted.

Attachment 51172
Air vents - I used 6- 1/2"x close blk nipples for air vents. I drilled a hole and then expanded the hole with a jigsaw to the right diameter for the nipples, then welded them in place. I bought a couple feet of 1/16" coated cable ($0.29/foot) and crimped some electrical fittings to each end of the cables, then pre-drilled the cap and attached the caps to barrel as shown.

Attachment 51173
Inside of barrel with 3 rectangular tubing blocks welded at two different heights in the barrel. I can use two grates, if I want. I am going to give it a second burn as there is still some residue from the barrel coatings. (barrels were freebies from a fruit wax service company, the content was oleic acid, which I believe is an animal fat used in the fruit wax)

Attachment 51175
22.5" weber grill fits on the top rack.

Attachment 51176
Inside look with the grate on the bottom rack with the basket and disc below.

Attachment 51174
Mostly completed barrel, just needs some paint, a thermometer, maybe a cutting board, possibly some wheels, a beer bottle holder, a stereo, etc...

Costs for material is as follows:
Discs - $0
Barrel - $0
Weber lid and grate - $0
Basket - $22-24
Air vents - $4 ea

A MIG welder, actylene torch, jigsaw were the primary tools that I used.
So far, the one barrel that I've smoked in holds the heat at 225-250F with 4 of the airvents open. I don't know how hot it will get with the six vents, I still need to test that. I burned a full basket of briquets over night (about 14 hours), just to see how long it would burn.

inv3ctiv3 03-23-2011 12:38 AM

I bought a HF weed burner today so I can burn out my drum again, gonna just go around with the WB and torch it and the basket so if there is any zinc/gavanization it will burn off. I'll wash and then re-coat with vegetable oil and paint it.

firemedic 03-23-2011 12:45 AM

ANY excuse to play with the weed burner is a good one!

Skidder 03-23-2011 05:00 AM

Pigwacker lookin good. I always cap my nipples too. Wow that just didn't sound right! What I mean is I attach them with the wires the same way. No loosing them that way. Nice work.

h20loo 03-23-2011 08:42 AM

Pigwacker- why didn't you just put one big hole? Nice job on the preparation and I like the horseshoes

bover 03-23-2011 09:04 AM

Quote:

Originally Posted by ksblues (Post 1587264)
Aside from Big Mista, I've not been able to find many -if any - Pro BBQ folks cooking at the competitive ($$) level on a UDS. Can anyone point me in the direction of those I'm missing?

I see them at every contest I go to, and it seems that I'm not the only one. Check out this thread:
http://www.bbq-brethren.com/forum/sh...d.php?t=102086

blackdog043 03-23-2011 10:25 AM

Quote:

Originally Posted by Drunken Monkey (Post 1584540)
Here's my first UDS. I stripped it down and painted it last weekend. Yesterday I seasoned it and I have some ribs on now.
Next weekend I'm adding eyelets for probes and a sliding door for the access to the charcoal basket.

Why are you adding an access door to the basket? Their really isn't a need for one. It looks like your basket is big enough for a long burn.

1FUNVET 03-23-2011 10:39 AM

Quote:

Originally Posted by blackdog043 (Post 1587655)
Why are you adding an access door to the basket? Their really isn't a need for one. It looks like your basket is big enough for a long burn.


I was wondering the same thing :confused: Along with why you have 6 nipples on the same side of the drum.

smokindave74 03-23-2011 01:50 PM

Agree with FunVet and BlackDog...........some questionable methods on here every once in a while.......overthinking things, IMHO.....

Anyone can build these things however they want, but the Norcoredneck design is hard to beat.

Evenly spaced draft holes, 2 with pipe caps, 1 with a ball valve. Hard to beat this. It works like a charm. I just left the holes open, and I cover them with refrigerator magnets instead.........very cheap and reliable.

My next advancement is a homebrew draft controller which will attach to a pipe nipple and valve on one of my draft holes. These things burn rock solid all on their own, but a draft controller just gives a little peace of mind on an overnight cook, when I want to sleep, rather than anxiously feel the need to check the cooker for temp.

Smokin'Dave


p.s. Don't add a door to the firebox.......too much potential for air leakage and draft problems. If you have a big enough basket, you will never have to add coals or wood. Use the smoking wood sparingly......only a couple chunks needed for a 12 hour+ cook.

Skidder 03-23-2011 02:28 PM

Yup K.I.S.S. is the way then u have no questions or problems in my book!

pigwacker 03-23-2011 03:32 PM

H20loo & 1FunVET - I used multiple air-vents so that I could regulate the heat better. I put all the vents on one side for two reasons, 1) I wanted to be able to use a hand cart to move the barrel, so i didn't want the vents in the way and 2) I'm lazy and didn't want to have to walk all the way around the barrel to open and close vents. I like the horseshoes too. They were cheap.


All times are GMT -5. The time now is 04:30 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.