|
I live in the KC area, where are you finding drums under $30? Found several places selling junk for about $25
|
one set aspen/mahagony removable side shelves awaiting linseed oil - why not add some accelerant?
http://a6.sphotos.ak.fbcdn.net/hphot..._2975878_n.jpg close up. the shelves slide into the handle in case i don't want to use them or future mods/accessories. http://a5.sphotos.ak.fbcdn.net/hphot..._1760216_n.jpg the twins. i should be finishing the other set of shelves instead of posting :becky: http://a4.sphotos.ak.fbcdn.net/hphot..._1371830_n.jpg this one has to do with losing stuff http://a7.sphotos.ak.fbcdn.net/hphot..._2253176_n.jpg |
"Quote This is the lid to my Weber, I do not want to have adjust it to fit the drum so I will find a new cheap kettle or a used Weber at the right price
http://i162.photobucket.com/albums/t...g?t=1298074384[/QUOTE] I took a grinder to the top rim and took enough off all the way around until my lid fit. You might even try the lid on the bottom if you didn't cut it open yet, it might fit better. |
I never thought about trying the bottom, thanks for the idea Blackdog:thumb:. I still want another Weber lid just to keep things simple and I just ordered a Smokenator for my Weber.
|
nice looking rigs righteous dog.
after my 6th cook now, i figured the spike wasnt really a spike. my smoking wood was smoking rather heavily initially causing the temps to be lower (albeit 220-230). once the smoke settled down it wasnt choking the fire out hence the increase in temp. i need to just wait a bit longer for it to dial in before leaving it alone. my buddy is bringing me 30ish lbs of boar he shot down in FL tomorrow. wish me luck, its my first boar cook. |
So I finally finished up my UDS build this weekend and broke it in with a 3 hour empty burn with the intakes wide open, then cranked it down to 225* and seasoned it with a few fatties, then cranked it open again and let it run the rest of the day. I have to say that if there any non-believers reading this thread, if you follow the general guidelines set forth by the brethren they will definitely deliver as promised. When all was said and done, I ended up running around 350* for 9 hours total and 225* for 3 hours total and only used about 8 lbs. of charcoal. Un-farking-believable. Now on to the pr0n:
For this first build, I went with the no-frills-no-skills approach. No welding, no step-bits for the big intake pipe hole, no grinding or cutting. The basket is made up of the charcoal grate from a Weber kettle, 2 12x24" sheets of 18 ga expanded steel, and then some bolts, nuts and bailing wire where necessary: http://img822.imageshack.us/img822/2606/img2830x.jpg And here's the UDS itself. For the intakes at the bottom, I drilled 3 3/8" holes around the bottom and covered them up with 1" diameter magnets. Bottom rack is 22" above the base of the charcoal basket and the top rack is 6" above that. Thermometer is the basic 100/475 from BBQ Bonanza. http://img140.imageshack.us/img140/8871/img2831e.jpg Minion method setup. Coals lit with weed burner http://img23.imageshack.us/img23/1899/img2837ob.jpg First batch of "seasoning" fatties http://img64.imageshack.us/img64/8343/img2844j.jpg With two intakes blocked and the third at 3/4 open, it settled in to 225* exactly shortly after this and held steady with no tending. I'm blown away by the efficiency of the rig! http://img573.imageshack.us/img573/5066/img2847o.jpg And here's a shot of the final product. The one on top was stuffed with sauteed onions and cheddar with Corky's rub. The one on the bottom was stuffed with bleu cheese and bacon with steak seasoning on the outside instead of a rub. I got busy tending to a sick kid so they overcooked a little, but still turned out great. http://img337.imageshack.us/img337/1746/img2854h.jpg Thanks to everyone who has contributed to this thread. This UDS will bring me and my family a lot of joy and full bellies for many years to come. For anyone on the fence about building their own UDS, do it! There's just something incredibly satisfying about smoking your food in something you built, which just happens to be something that most others use as a garbage can! |
Quote:
|
Just ran my UDS for 26 hours, 225-250, on 8# of Rancher Briquettes.
Just can't beat it! http://samshuford.com/BBQ/wp-content...um-225x300.jpg |
this is a good thread.
just a few hundred pages too long though. |
Quote:
|
Quote:
|
Quote:
The Pid controller is an AUBER Ins. device. 6 programable steps based on time. (60MIN at 100F, 240MON at 225F) Their link is on my Blog (see Signature) |
Well guys, I have read most of this thread and I am ready to build my own UDS. I obtained a drum today (hard to beat the price since it was free). I still have to come up with all the other parts and pieces but I have a lot of great ideas thanks to this thread and none of the other parts seem to be too hard to come by.
It will likely be a few weeks before I start construction, but, I do want to say thanks to each of you that have contributed ideas and pictures to this thread. I am sure that they will guide me safely to my quest for good food from my own UDS. Thanks again, Stan |
Stan, it's an easy build bro. My best advise is to keep it as simple as possible. That is what will work the best. Keep us posted on what you decide on.
|
Just finished up a valve mod over the weekend. I was getting tired of guessing and checking the valve ball locations during a cook. So I decided to make the adjustment easier to get to and easier to know the valve status.
http://img826.imageshack.us/img826/8650/standoff.jpg http://img593.imageshack.us/img593/4...lvebracket.jpg http://img593.imageshack.us/img593/7089/assembly.jpg |
All times are GMT -5. The time now is 09:39 PM. |
|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.