smokeyw
is Blowin Smoke!
When using multiple ET732s in close proximity of each other, will they interfere with each other? I am hoping to use 4 of them at the same time at an upcoming competition.
-
working on DNS.. links may break temporarily.
Maverick ET732 Question
- Thread starter smokeyw
- Start date
5-0 BBQ
is one Smokin' Farker
No. You should be fine.
woodbutcher1
is one Smokin' Farker
- Joined
- Apr 4, 2010
- Messages
- 740
- Reaction score
- 1,181
- Points
- 93
- Location
- Shelby Twp. Macomb Co. SE Michigan
Good question smokeyw.
I have used some other (cheap) thermos in my drum and ended up with all kinds of weird readings. I ended up only using 1 transmitter had 3 probes in in different cuts of meat. By switching the probes into the transmitter i had no more problems.
I would imagine if using 2 or more of any of the same units could make your head spin.
I have used some other (cheap) thermos in my drum and ended up with all kinds of weird readings. I ended up only using 1 transmitter had 3 probes in in different cuts of meat. By switching the probes into the transmitter i had no more problems.
I would imagine if using 2 or more of any of the same units could make your head spin.
SmokinGuitarPlayer
Full Fledged Farker
We use three of them no problem...just turn them on one "pair" at a time so they register correctly ..transmitter to receiver and then don't turn them off and they'll stay synched for months.
FB/SGP
FB/SGP
I have found they can cross sync because I have had it happen, but turn them on one at a time and you are good to go.
bbqbandit70
Knows what a fatty is.
I use 3 and also turn them on one at a time with no problems
