PDA

View Full Version : Pretty disappointing eggsperience


deez20
12-09-2008, 12:15 AM
Usually I work nights so I don't cook all that often during the week but today I worked days and was all excited about firing up the egg tonight...Nothing big planned just some split chicken breasts and potatoes for the wife and I. Get everything ready and go out to start up the egg and as luck would have it, it was frozen shut :sad:. Tried dropping a starter cube down through the top but I still had the pizza stone in there so the left over lump didn't ignite and it wouldn't open...Guess I will have to wait until wednesday when it warms up to open her up...Anybody have any suggestions on how to open a frozen egg??

Norcoredneck
12-09-2008, 12:37 AM
http://visibility911.com/blog/wp-content/uploads/2008/02/humpty_dumpty.jpg

Hair dryer.

yelonutz
12-09-2008, 12:42 AM
Open the bottom slider and put the fire starter in there. Heat rises.
Or move to California!!
NUTZ

cheez59
12-09-2008, 03:00 AM
How about a big flat screwdriver.:biggrin:

J/K the starter in the draft door sounds like a good idea.

KuyasKitchen
12-09-2008, 03:03 AM
Gasoline and a match. That'll open it!

http://www.geocities.com/CollegePark/6089/giveupon.jpg

TN_BBQ
12-09-2008, 05:54 AM
I second the hair dryer suggestion.

I'm not sure I'd try to pry it open with a paint scraper (scared of messing something up).

Rick's Tropical Delight
12-09-2008, 05:56 AM
firestarter/lump in the bottom vent.

lightbulb down thru the dome.

gently prying between the gaskets with a putty knife.

cover.

BBQ Grail
12-09-2008, 07:14 AM
Electric blanket

cmcadams
12-09-2008, 07:39 AM
When you're crying because it won't open, drip the tears around the outside of the lid so the salt water thaws it.

Bigdog
12-09-2008, 08:43 AM
I say use the weed burner mod. :twisted::twisted::twisted::mrgreen:

milehigh
12-09-2008, 10:23 AM
I have used a hair dryer around the gasket before. Quite the feeling when you go to lift the lid and it won't budge no matter how hard you pull huh?

Paul

deez20
12-09-2008, 11:48 AM
Warmed up today and managed to get it open..I guess a cover for it will be added to my christmas list. It's amazing that when I lifted the handle the front of the egg started coming out of the nest. Guess that ice keeps everything nice and tight.

Barbarian
12-09-2008, 11:57 AM
glad you got it open, I woulda gone with cmcadams or big dogs suggestions, big dogs would be alot more fun then Norco or trp1fox ideas

jgh1204
12-09-2008, 12:00 PM
I guess I don't understand how it froze.:biggrin: I just had to turn on the A/C.

BobBrisket
12-09-2008, 12:04 PM
When you're crying because it won't open, drip the tears around the outside of the lid so the salt water thaws it.

No that's funny. I wouldn't know what to do either........not cause we have problems with freezing, but because I don't have an egg!:sad:
Glad you got it open.

Jorge
12-09-2008, 12:26 PM
I guess I don't understand how it froze.:biggrin: I just had to turn on the A/C.

Farker. The wind is out of the north in DFW today!

jgh1204
12-09-2008, 01:36 PM
Seriously, when I first read that I was thinking the hinges had rusted shut. That is what frozen usually means in Texas.

Jorge, it is supposed to be cold here tomorrow.

augie
12-09-2008, 02:09 PM
You can just ship it to me until it warms up.... :D

HBMTN
12-09-2008, 02:47 PM
You just made it mad and now the egg does not want to play :mrgreen: