PDA

View Full Version : Comparison - CyberQ vs FB2Drive...


darita
10-04-2020, 08:53 AM
I always loved the way my CyberQ was able to hold temps in my PrimoXL, but after purchasing a Fireboard 2 Drive for my MB560, I thought I'd do a comparison of the two controllers.
I used 240*, 275* and 325* for set temps and used a Pit Viper 10cfm blower for both. There was a 4* difference in same-temp readings between the two controllers, however I found that to be negligible.
I was surprised to find that the CyberQ temps wandered quite a bit, whereas the FB2D stayed within a respectable variance of set temps. The FB2D will now be my go-to controller. First pic is the FB2Drive. Second is the CyberQ.https://i.imgur.com/RNsBMJf.jpghttps://i.imgur.com/pWttNl3.jpg