PDA

View Full Version : curing chamber


c farmer
04-09-2015, 08:02 PM
I am going to build a curing chamber.

Thinking of a over/ under fridge.



If you kind folks would share some info and pics of yours I would appreciate it?

smoke ninja
04-09-2015, 08:15 PM
Well you are the cure master.

I think Shagdog and company built one. good luck.

Shagdog
04-09-2015, 08:22 PM
Did someone say Richard? (http://www.bbq-brethren.com/forum/showthread.php?t=188117)

Fwismoker
04-09-2015, 08:46 PM
http://www.sausagemaker.com/tutorials/chamber/curing_chamber.html

c farmer
04-09-2015, 08:47 PM
Well you are the cure master.

I think Shagdog and company built one. good luck.

I don't know about that, but I am smoking some BBB tomorrow. :biggrin1:

martyleach
04-09-2015, 09:24 PM
I made one a couple years ago. Here's a link to one of the threads. I used an over/under and if you follow the thread down there is a link to the stuff I used to make it into a curing chamber. works great. Have fun.
http://www.bbq-brethren.com/forum/showpost.php?p=2517064&postcount=1

cowgirl
04-09-2015, 11:33 PM
Yours both look great Shagdog and Marty!
I am in the middle of putting one together based on Sam3's wine cooler curing chamber.
Have had unbelievable obstacles tripping me up (personal) or it would have been build months ago. :tsk::-D
Looking forward to seeing what you build Adam!

smoke ninja
04-09-2015, 11:35 PM
I don't know about that, but I am smoking some BBB tomorrow. :biggrin1:

Well we expect pictures then.

Shagdog
04-09-2015, 11:36 PM
Need any help, Jeanie or farmer, just give a shout!

bluetang
04-10-2015, 09:25 AM
I opted for a freezer so with a temp controller so I can use the freezer as a freezer or refriderator as well as a drying cabnet. You can get all plug-n-play components too.

Temp controller
Johnson Controls Digital Thermostat Control Unit - A419ABG-3C
by Johnson Controlshttp://www.amazon.com/Johnson-Controls-Digital-Thermostat-Control/dp/B00368D6JA/ref=pd_sxp_f_pt

Humidity...I've seen this cheaper so look around a bit
Amazon.com : NEW C.A.P HUM-1 Hydroponic Climate Humidity Dehumidifier Controller w/ 2 Outlets : Hvac Controls : Patio, Lawn & Garden@@AMEPARAM@@http://ecx.images-amazon.com/images/I/41MZYatoTFL.@@AMEPARAM@@41MZYatoTFL

Go to wally world and get an ultrasonic humidifier, reason for ultrasonic is that it has no PITA filter to change.

Lookin forward to your products!

Fatback Joe
04-10-2015, 09:43 AM
Mine is basically the same set up as the infamous Richard as far as the electronics go. I recently upgraded to a full size fridge and it was nice just moving the box with all the electronics from one spot to another and being done with it.

I have not taken a pic, but on the big fridge, I cut a hole and put a dryer vent flap on it with a computer fan behind hit. Been working great for air circulation and keeping the humidity down where I want it.