PDA

View Full Version : Outdoor Kitchen day 4-5


Cajun Ty
06-29-2014, 09:49 PM
Update on my project
http://i1280.photobucket.com/albums/a498/cajuntcl/imagejpg8_zpsab3b9576.jpg (http://s1280.photobucket.com/user/cajuntcl/media/imagejpg8_zpsab3b9576.jpg.html)
http://i1280.photobucket.com/albums/a498/cajuntcl/imagejpg7_zps03efd3e1.jpg (http://s1280.photobucket.com/user/cajuntcl/media/imagejpg7_zps03efd3e1.jpg.html)
http://i1280.photobucket.com/albums/a498/cajuntcl/imagejpg9_zps01ff04e5.jpg (http://s1280.photobucket.com/user/cajuntcl/media/imagejpg9_zps01ff04e5.jpg.html)

Mason Dixon Bowhunta
06-29-2014, 10:20 PM
Looking good so far. Can't wait to see the finished product.

Cajun Ty
06-29-2014, 10:49 PM
Thanks its getting there

Trailer Trash
06-29-2014, 11:11 PM
Very nice!

chris1360
06-30-2014, 05:01 AM
Man I am jealous... that is a super nice outdoor kitchen. Good construction, and I like your frame work. Rock solid. What kind of counter top are you planning?

Bigelow
06-30-2014, 05:07 AM
Nice.

sliding_billy
06-30-2014, 06:19 AM
Really great work.

Blythewood BBQ'er
06-30-2014, 07:01 AM
Looking great man!

Cajun Ty
06-30-2014, 07:13 AM
Thanks everyone
Chris1360, i'm going to put a stainless countertop (since i do sheet metal for a living) so clean up will be easy

Drake
06-30-2014, 08:41 AM
Thats a good looking space. I love those tin inserts.

Carbon
06-30-2014, 10:46 AM
That's gonna turn out nice, especially with the SS top. Great framing job.

Shagdog
06-30-2014, 10:52 AM
Wow, that is going to be sweet!

Happy Hapgood
06-30-2014, 11:30 AM
Looks Fantastic! Party at Ty's House!

Cajun Ty
06-30-2014, 12:28 PM
Looks Fantastic! Party at Ty's House!

Let me get this done and thats fine with me :thumb::thumb:

Dadeo719
06-30-2014, 12:29 PM
:clap2:

Texan79423
06-30-2014, 04:52 PM
My best bud a sheet metal man with 40 years experience helped me with my trailer rig. He built me a storage box 30 inches x five foot long with one top lid and a side opening door that amazed me. Tig welded it all up perfectly square, flat and true. Tin benders are so precise!

Cajun Ty
06-30-2014, 08:57 PM
Very nice rig Texan :thumb:

cowgirl
06-30-2014, 09:32 PM
That's looking great Cajun Ty! Nice work!

Wickedcajun
06-30-2014, 10:00 PM
Looks great, Ty... where's the brass pole, though???

Cajun Ty
06-30-2014, 10:23 PM
Looks great, Ty... where's the brass pole, though???

Haha thats the last thing G :becky:

Cajun Ty
07-02-2014, 09:36 AM
So i go pick up my fridge, side burner and gas grill but the hibatchi top isnt ready yet :sad:. Then to top things off the rough opening that was giving to me was to small so the dam grill didnt fit had to redo so another set back.

Bit of advice: WAIT TILL YOU HAVE GRILL ON HAND TO FRAME LOL:lol:

Terry The Toad
07-02-2014, 09:58 AM
Thats a good looking space. I love those tin inserts.

I agree. Very nice touch. :thumb:

Big George's BBQ
07-02-2014, 10:25 AM
Very nice Looking forward to watching your progress

80 gallon smokin
07-02-2014, 10:30 AM
Wow, that's going to be a great space!! can't wait to see the finish product!

Cajun Ty
07-02-2014, 08:40 PM
Thanks yall

Trailer Trash
07-06-2014, 12:25 AM
Beautiful!!!

Wickedcajun
07-08-2014, 08:10 PM
Looking right... Brotha

Cajun Ty
07-09-2014, 10:03 AM
Looking right... Brotha

Thanks G

CharredApron
07-09-2014, 12:09 PM
Looks great Ty, what stainlesss are you using? I am trying to source some here in France for my kitchen. 316? What Gauge? Thanks

Cajun Ty
07-09-2014, 02:24 PM
Looks great Ty, what stainlesss are you using? I am trying to source some here in France for my kitchen. 316? What Gauge? Thanks

Using 304 22ga, i aint rich enough for 316 lol:becky:, I just finished a table top for a customer and he had a sheet of zinc delivered here :shock: one sheet came on a pallet with a sheet of 1/2" plywood top and bottom i didnt even ask how much he paid for it haha but was nervous to cut and bend it :pray:
This is the table
http://i1280.photobucket.com/albums/a498/cajuntcl/imagejpg1_zps7b0a78c2.jpg (http://s1280.photobucket.com/user/cajuntcl/media/imagejpg1_zps7b0a78c2.jpg.html)

CharredApron
07-09-2014, 02:37 PM
i aint rich enough for 316 lol:becky:, I just finished a table top for a customer and he had a sheet of zinc delivered here :shock: one sheet came on a pallet with a sheet of 1/2" plywood top and bottom i didnt even ask how much he paid for it haha but was nervous to cut and bend it :pray:


Thanks, I had all SS counter tops and backsplash in my kitchen in Florida. It was really hard to find someone that would do that work for a residential kitchen. Easy if I was looking to do a complete restaurant kitchen. I found a guy that did a lot of custom boat work, but I don't know what material he used either 304 or 316. Is 304 good for what I want? I am doing this myself indoors and I have the break and a Tig.

Cajun Ty
07-09-2014, 03:01 PM
i aint rich enough for 316 lol:becky:, I just finished a table top for a customer and he had a sheet of zinc delivered here :shock: one sheet came on a pallet with a sheet of 1/2" plywood top and bottom i didnt even ask how much he paid for it haha but was nervous to cut and bend it :pray:


Thanks, I had all SS counter tops and backsplash in my kitchen in Florida. It was really hard to find someone that would do that work for a residential kitchen. Easy if I was looking to do a complete restaurant kitchen. I found a guy that did a lot of custom boat work, but I don't know what material he used either 304 or 316. Is 304 good for what I want? I am doing this myself indoors and I have the break and a Tig.

304 is what we normally use and it comes polished with a protective film on it, now 316 on other hand is what we would use on exhaust or most stainless that is in severe conditions like a boat that works in the Gulf of Mexico that is pounded by saltwater. 316 is the ideal steel but not many want to pay say $400 and up a sheet price depends on thickness. I dont know what kind of brake you have but stainless bends different from other metals so your thickness capacity is a issue and tig is good for thicker stainless but thinner man it takes low heat or it will blow thru and then you have a mess

Kathy's Smokin'
07-09-2014, 04:19 PM
Just saw this thread, I love it! I hope to build an outdoor kitchen one of these years for summer preserving and entertaining. I'll be building some kind of pavilion, etc., to give it a roof and posts and laying paving stones for the floor, a little away from the house where there is almost always a cool summer breeze. Your build looks great, I'm jealous, too.

scrub puller
07-09-2014, 04:35 PM
Yair . . . Cajun Ty .

tig is good for thicker stainless but thinner man it takes low heat or it will blow thru and then you have a mess

I don't quite understand that statement . . . as far as I know TIG is the only way to weld light gauge stainless.

I weld 316 exhaust bellows .25mm thick and would be interested to know if there is some other process.

Cheers.

Cajun Ty
07-09-2014, 06:26 PM
Yair . . . Cajun Ty .



I don't quite understand that statement . . . as far as I know TIG is the only way to weld light gauge stainless.

I weld 316 exhaust bellows .25mm thick and would be interested to know if there is some other process.

Cheers.

I dont weld any of my tops they are soildered, only places i have to soilder are the corners everything else is bent in brakes, and a experenced welder which i should have said should not have any problems but one that isnt well that can be the mess

Wickedcajun
07-09-2014, 07:29 PM
Still no brass pole... I'm so disappointed

scrub puller
07-09-2014, 07:37 PM
Yair . . . Cajun Ty.

Gotcha mate, I'm with you now . . . actually I have had little success in soldering stainless, what products do you use?

Cheers.

Cajun Ty
07-09-2014, 08:14 PM
Still no brass pole... I'm so disappointed

Lmao hey it's going to be like the cherry on top G :becky: just need to find a polisher :pound:

Cajun Ty
07-09-2014, 08:21 PM
Scrub i sent you a pm :thumb: