PDA

View Full Version : UDS cover?


mchar69
03-11-2014, 04:45 PM
What do you guys use as a cover?
Black plastic bag = too small.
Weber 22" = too short.
I am going to keep it in my garage until I
figure out a cover.
And thanks to the 700 page thread and
NorCalredneck's thread
and all who chimed in.
Mine has all the holes, the Fire Dept. around
here is sniffingly suspicious, and I've yet to burn it out.

Bludawg
03-11-2014, 04:54 PM
contractor 55 gal trash can liners about 8.00 a box of 50 at homo depot I get a yr out of a bag secure it at the bottom by pulling snug fold over the slack and held with a magnet

mcyork28
03-11-2014, 06:25 PM
I just picked this up at Home Depot. Its a little thin but is doing the trick.

http://www.homedepot.com/p/Brinkmann-Dome-Smoker-Cover-812-7090-S/203077121

RT
03-12-2014, 09:30 AM
contractor 55 gal trash can liners about 8.00 a box of 50 at homo depot i get a yr out of a bag secure it at the bottom by pulling snug fold over the slack and held with a magnet

^^^ +1 ^^^

CORNDAWG
03-12-2014, 11:11 AM
I had the brinkman cover mentioned above for about a year. It cracked and got several holes in it due to the cold. It fit ok, but I have risers for the air intakes and it had a hard time fitting over them. I went back to buy another one, because for $10 it worked fine. When I was at HD, I seen another one for the same price. It was for a regular gas grill. It works better. Hole at the bottom is very large. I just toss it over and it has a draw string on the bottom that can be cinched up.

cowgirl
03-12-2014, 11:44 AM
I just picked this up at Home Depot. Its a little thin but is doing the trick.

http://www.homedepot.com/p/Brinkmann-Dome-Smoker-Cover-812-7090-S/203077121

I just got one of these too. Haven't tried it yet. Should fit my BPS drum but not my homebuilt.