PDA

View Full Version : Truck bedliner on U.D.S


HookedOnQ
04-05-2013, 08:24 PM
Im considering using spray on truck bedliner on my uds build and was wondering if anyone on here has done this or has any input on if its a good idea or not. My main concern would be heat but from what i have read on here some are not even using high temp paint and its holding up just fine. So what do u guys think?

Carbon
04-05-2013, 08:29 PM
Are you after the finish or trying to add an insulating layer, or both? I think it'll be ok.
I would first test this coating on a sheet of metal to see how it reacts to temps.

DirtyChurro
04-05-2013, 08:29 PM
I have thought that would be cool too. :cool:

HookedOnQ
04-05-2013, 08:39 PM
Are you after the finish or trying to add an insulating layer, or both? I think it'll be ok.
I would first test this coating on a sheet of metal to see how it reacts to temps.

Both.. Im not sure how much insulating it will do figured that would be a bonus really want the durability more than anything...

happycamper
04-05-2013, 09:23 PM
Google "isocyanate" and decide if that is something you want anywhere near your food. I work with equipment for spraying polyurea, and I wouldn't put it anywhere close to my food.

Gilstarr
04-05-2013, 09:37 PM
I think I would stay away from the bedliner and go all natural..

HookedOnQ
04-06-2013, 12:54 PM
After doing a little more research i think i agree with happycamper on this.. I dont think its somthing i want around my food so i think ill just stick to what i know works and use regular paint

Buried In Smoke
04-06-2013, 01:12 PM
After doing a little more research i think i agree with happycamper on this.. I dont think its somthing i want around my food so i think ill just stick to what i know works and use regular paint


Third.

Carbon
04-06-2013, 01:18 PM
If you're after the textured finish perhaps the hammerlite spray paint might be a safer alternative.

Daggs
04-06-2013, 10:04 PM
It's gonna cost too much for a good one. IMO

Hdhillin
04-06-2013, 10:14 PM
I believe the melt temperature is around 400 degrees. That is what I was told when I wanted my smoker trailer coated. They said it would melt like tar.