PDA

View Full Version : UDS Cover Ideas?


JMSetzler
08-26-2011, 04:30 PM
I'm trying to decide what I want to do for a cover for my UDS. Anyone have any cool ideas with pics?

gtr
08-26-2011, 04:33 PM
No pix handy, but I use a cover for a 26" Weber kettle.

devious
08-26-2011, 04:38 PM
i use the same cover as above.

TheMidnightSmoker
08-26-2011, 04:52 PM
If you want a custom made Vinyl cover for uour drum this person was mentioned on the BDS site.
http://vinylcoveringsbymel.com/

Carbon
08-26-2011, 04:53 PM
I'm using a Char Broil water smoker cover, 30" diameter, 3 ft tall. I got it at Home Depot for $8.

Abelman
08-26-2011, 04:57 PM
Look here. Not really on this page as it's bookmarked.

I've been using their covers for years and love them.

http://www.the-cover-store.com/item_detail.aspx?ItemCode=CSP06113KH2

ozlites
08-26-2011, 06:46 PM
http://ts1.mm.bing.net/images/thumbnail.aspx?q=1222089710308&id=de54f918e75e4bd451b9ca5d061d3166

N8man
08-26-2011, 08:34 PM
When I kept my DrumPit outside, I used an 8x10 tarp and bungie cords..

JMSetzler
08-26-2011, 09:38 PM
When I kept my DrumPit outside, I used an 8x10 tarp and bungie cords..

I like that idea and will probably go with it...

Boshizzle
08-26-2011, 09:40 PM
Home Depot has a cover made for a 22.5" grill that fits my UDS perfectly. It only cost $7.99 too.

bbqchicken
08-28-2011, 09:10 PM
When I kept my DrumPit outside, I used an 8x10 tarp and bungie cords..



good idea. thats what I had in mind. It doesn't have to look pretty, only for the birds to crap on right?

El Ropo
08-28-2011, 09:49 PM
I picked up a Charbroil (or brinkmann, or masterforge) generic cover for a 22.5" kettle. They are 36" high with an elastic bottom. Paid under $8.00 at Lowes, and plenty of room for a dome lid with the 36" height and being 30" wide. Fits perfectly. Since they're cheap, if they don't like freezing weather, I can just get another one. $6.95@ lowes.

Ole Man Dan
08-28-2011, 10:26 PM
Home Depot has a cover made for a 22.5" grill that fits my UDS perfectly. It only cost $7.99 too.

Same here...
It's an improvement over the 55 gal. can-liner I used till I got the
Weber cover.

GEORGIA CRACKER(FROM TEX)
08-28-2011, 10:44 PM
I found a cover at Wal Mart for $5 that fits great, and has a draw string around the bottom. It covers down to about 8" from the bottom of the barrel. I have a flat top lid on mine. Works great for the price.

bbqchicken
08-28-2011, 11:19 PM
I picked up a Charbroil (or brinkmann, or masterforge) generic cover for a 22.5" kettle. They are 36" high with an elastic bottom. Paid under $8.00 at Lowes, and plenty of room for a dome lid with the 36" height and being 30" wide. Fits perfectly. Since they're cheap, if they don't like freezing weather, I can just get another one. $6.95@ lowes.


cool Ill check it out

righteousdog
08-29-2011, 07:31 AM
i also use the 7.99 special. a custom one would be cool but would probably cost more than the cooker...