PDA

View Full Version : Replacement grate needed


Roguejim
07-06-2011, 05:56 PM
I modded my Traeger Texas Elite to hold another grate above the factory one. It looks like I'll need one that measures ~35" by 15". I called the local Lowe's, but no luck there. Any online sources? Thanks.

bigabyte
07-06-2011, 06:48 PM
You could always make one with expanded steel to a custom size.

Roguejim
07-06-2011, 08:05 PM
Thanks. I'm not sure what expanded steel is, but, I guess the local steel fab place will know. Is it spendy?

bigabyte
07-06-2011, 08:52 PM
You can get it at the Hardware store. Looks like this.

http://www.brass-grilles-shop.co.uk/ekmps/shops/saunders/images/expanded-steel-grille-black-1220mm-x-914mm-x-1mm--74-p.gif

You can cut through it pretty easy as you can see to a custom size. It's easily reinforced with some steel rods as well. No welding required, you can thread nuts and bolts through it and get all sorts of Erector Set with it. Or weld it on if you have the skills. Lots of custom rigs use expanded steel grates.

SmokerKing
07-06-2011, 11:19 PM
I'd make you one if I could build it and ship it economically.
I'd do it at my cost.