The BBQ BRETHREN FORUMS.  



Our Homepage Donation to Forum Overhead Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Amazon Affiliate
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking.


Reply
 
Thread Tools
Old 07-10-2010, 02:06 PM   #1
baldbill
Full Fledged Farker
 
Join Date: 04-12-09
Location: columbiana alabama
Default uds

Son of a budhist that liner is hard to get off! I am working on my first uds and have been burning that rascal out pretty good, 1 more should get it, but that #*%$&&#$ lid is a pain, I am wire wheelin and sanding...it looks like someones fixin to buy himself a weedburner. If I lit a really good fire in the drum and set the top where it would burn do yall think it would warp the lid?
baldbill is offline   Reply With Quote




Old 07-10-2010, 02:28 PM   #2
fshnwiz
Knows what a fatty is.
 
Join Date: 04-25-10
Location: Springfield,MO
Default

Probably, took me about 3 hrs with a wheel after I burned it out be patient it will be worth it.
fshnwiz is offline   Reply With Quote


Old 07-10-2010, 05:37 PM   #3
expatpig
is One Chatty Farker
 
Join Date: 02-20-10
Location: Cochrane, On.
Default

I wouldn't worry much about the lid.
__________________
"When I was in Canada, I had a lot of time to think."- Doug Sahm
[B][COLOR=red]UDS x 5[/COLOR][/B]
[COLOR=red][B]Weber Performer[/B][/COLOR]
[B][COLOR=red]Napoleon Apollo[/COLOR][/B]
[COLOR=#ff0000][B]GOSM[/B][/COLOR]

[COLOR=blue][B][I]CSBBQA, KCBS, NOBS(Northern Ontario Barbecue Society)Professional Barbecue Team. USAJFKCENMA.[/I][/B][/COLOR]
expatpig is offline   Reply With Quote


Old 07-10-2010, 06:16 PM   #4
The Frog
Knows what a fatty is.
 
The Frog's Avatar
 
Join Date: 05-03-10
Location: Anaheim, CA
Default

I did an entire drum with two "poly-carbide" pads on a 4" angle grinder. It took me 5 hours to do the inside and out, top and bottom. All I can say is wear a respirator, goggles, etc.

It looks like a scotch brite pad, and worked better than anything else I tried. Other things tried were wire wheels, cable twisted wire wheels, and 60 grit sanding discs. I did not try a flap disc.

I bought the pad from Harbor Freight for around $5.99. It looks a lot like this one, but this isn't it: http://www.harborfreight.com/replace...ver-66101.html I can't find the exact one that goes onto the 5/8" arbor for the angle grinder.

I saw this one at Home Depot, which is the same thing, I think: http://www.homedepot.com/h_d1/N-5yc1...atalogId=10053
__________________
UDS, 30 Year Old Kettle, I need to build something bigger. KCBS CBJ
The Frog is offline   Reply With Quote


Old 07-10-2010, 06:56 PM   #5
RockyMtnBBQ
Found some matches.
 
Join Date: 06-08-10
Location: Parker, CO
Default

The Norton Rapid Strip wheels from HD work great on the red liner. They take it down to bare steel MUCH faster than the wire wheel...just FYI
RockyMtnBBQ is offline   Reply With Quote


Old 07-10-2010, 07:10 PM   #6
jgh1204
Babbling Farker
 
jgh1204's Avatar
 
Join Date: 12-26-04
Location: Selma, TX(You better slow down when you hit town)
Default

I didn't worry about the lid
jgh1204 is offline   Reply With Quote


Old 07-10-2010, 11:49 PM   #7
Johnny_Crunch
Babbling Farker

 
Join Date: 04-03-10
Location: Cypress TX
Default

The weed burner will warp the lid. It did mine anyway.
__________________
J Crunch
Johnny_Crunch is offline   Reply With Quote


Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Completed 1st UDS build/First cook on new UDS gambler Q-talk 21 09-06-2011 09:41 PM
Mini Uds or Regular UDS Fezikk Q-talk 21 01-27-2011 09:15 AM
First UDS Pork Tenderloin- UDS Temp Control HOPTOAD Q-talk 10 10-18-2010 09:20 PM
UDS Newb questions (Yes, I read the UDS thread!) McGurk Q-talk 5 04-07-2010 10:09 AM
New UDS Lid, New UDS Heat Shield, and tester cooks (PRON) smokinvic Q-talk 12 08-24-2009 01:18 PM

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Forum Custom Search: Enter your Search text below. GOOGLE will search ONLY the BBQ Brethren Forum.
Custom search MAY not work(no display box) in some configurations of Internet Explorer. Please use compliant version of Firefox or Chrome.







All times are GMT -5. The time now is 02:17 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.
no new posts