oink
The BBQ BRETHREN FORUMS.  


Our Homepage Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Brethren Banners(temp offline)
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, Equipment and just outdoor cookin' in general, hints, tips, tricks & techniques, success, failures... but stay on topic. And watch for that hijacking.


Reply
 
Thread Tools
Old 05-28-2013, 10:02 PM   #10921
Q Junkie
is One Chatty Farker

 
Q Junkie's Avatar
 
Join Date: 07-07-12
Location: San Marcos, CA
Default

Efficiency and thermal mass are two different things.
How hot do you want to get?
How fast do you want to get there?
How long do you want to be there?
Q Junkie is offline   Reply With Quote


Old 05-28-2013, 10:04 PM   #10922
Q Junkie
is One Chatty Farker

 
Q Junkie's Avatar
 
Join Date: 07-07-12
Location: San Marcos, CA
Default

I forgot.....how much do you want to spend?
Q Junkie is offline   Reply With Quote


Old 05-28-2013, 10:14 PM   #10923
Carbon
is One Chatty Farker
 
Join Date: 08-24-08
Location: Los Angeles
Default

Quote:
Originally Posted by SuperJETT View Post

Are you talking about using the cement dry or mixing with water?
Sorry, I forgot to mention water. Yes, you add water, and I believe some hydrated lime. It's been quite some time since I made this mixture so I don't remember the exact ratios.
Well, I guess what you're looking for is thermal mass more so than insulating properties. Like lining the walls with firebricks. That would definitely hold and keep temps stable once the thermal mass reaches ideal temp.
__________________
....UDS....Mini-WSM....Midi-WSM....Mod-ECB....22.5-OTG....34"wood fired pizza oven....
Carbon is offline   Reply With Quote


Old 05-28-2013, 10:36 PM   #10924
RemoGaggi
Knows what a fatty is.
 
Join Date: 03-28-13
Location: Sacramento, CA
Default

CambuiAl,

You definitely need to get the ball valve tight and sealed. If it's not too loose, you can use some hi-temperature silicone. It's usually red in color and you can get it at all automotive supply stores. A tube is about $5 here in the United States.
__________________
Traeger 070 & Jr., Mini WSM, UDS, Akorn, Weber gasser, BGE(sold)
RemoGaggi is offline   Reply With Quote


Old 05-29-2013, 09:30 AM   #10925
jcinadr
On the road to being a farker
 
Join Date: 01-31-09
Location: Austin, Texas
Default

If you do a bit of research, you will probably find some mix recipes for the vermiculite (and possibly perlite). IIRC vermiculite is a cheep substitute used in low temp backyard forges. You might also search for lightweight cement recipes. Perlite is an expanded volcanic glass (vermiculite is an expanded silica), so not 100% which was used in which application.
jcinadr is offline   Reply With Quote


Old 05-29-2013, 01:08 PM   #10926
cjs27410
Knows what a fatty is.
 
Join Date: 02-07-13
Location: greensboro nc
Default

Adjustable grate in my charcoal basket. 14" diameter x 12" tall
Attached Images
File Type: jpg charcoal basket.jpg (74.0 KB, 701 views)
cjs27410 is offline   Reply With Quote


Thanks from: --->
Old 05-29-2013, 01:55 PM   #10927
huskerfan1200
Knows what a fatty is.
 
Join Date: 02-10-12
Location: Rochester, MN
Default

Ok...metal working noob question here...

I have two UDS that I built a coulple years ago. Currently, I use fridge magnets on the four intakes (3/4"). The magnets work great but it is time to step-up and add the nipples/ball valve. I'd also like to add the pipe up the side so I don't have to bend over everytime to adjust airflow.

My question is this...what parts do I need? What are they called?

I did search here, there and everywhere but didn't really find what I am looking for. Would like to be able to walk into Lowe's and say, "I need this..."

Thanks,
huskerfan1200 is offline   Reply With Quote


Old 05-29-2013, 02:05 PM   #10928
SuperJETT
Found some matches.
 
Join Date: 09-20-10
Location: Louisville, KY
Default

black iron pipe close nipples and lock nuts for them. I didn't use the lock nuts though, I cut my holes just right so the nipples threaded themselves into the drum creating an airtight seal.
SuperJETT is offline   Reply With Quote


Old 05-29-2013, 02:09 PM   #10929
hachi-roku_fan
Full Fledged Farker
 
Join Date: 05-25-13
Location: Los Angeles
Default

For those that used the Big Lots grill bottom for lids, is this it?

http://m.biglots.com/mt/www.biglots....d-kettle-grill

It says 21.5 inch? Just trying to clarify
hachi-roku_fan is online now   Reply With Quote


Old 05-29-2013, 02:29 PM   #10930
kitts21
On the road to being a farker
 
Join Date: 07-09-11
Location: Farmington, NY
Default

Well here is the mini-UDS I made for the place I work. Nothing flashy, just a KISS build.

It is a small drum, not sure of the exact size. I made this one upside down so it would be easier to clean and tend to the basket.



This is the WSJ I saved at a yard sale(free).




I fired it up for a seasoning, and I'm not sure if it's the size or what. But this has been the easiest UDS I have made to control the temp. I got it up to 250, ran dead nuts for about 3 hours, bumped it up to 300 for another 2 hours, then up to 400 for a final 3 hours. Each time I had no problem hitting the temp or holding the temp. I shut it down and out of the half of bag of KBB I put in it. there is about 1/2 of that KBB left. I almost don't want to donate it to work. It's awesome.
kitts21 is offline   Reply With Quote


Old 05-29-2013, 03:36 PM   #10931
dadsr4
Babbling Farker
 
Join Date: 02-08-10
Location: Howell, MI
Default

Great handle idea/design.
__________________
Two Weber daisy wheel kettles A: 1979 P: 1993, and an unused ECB
dadsr4 is online now   Reply With Quote


1 members found this post helpful.
Old 05-30-2013, 04:36 PM   #10932
swamperjmb
Got rid of the matchlight.
 
Join Date: 05-28-13
Location: Belton, MO
Default

I'm on page 352 and this thread is never ending. I think I got the concept, well at least by page 50 if a person doesn't get it somethings wrong . This will be a great smoker to cook small quantities of meat and efficient enough to walk away. I'm getting two 125 gallon D tank's "propane" to make one hell of an offset smoker. I out grew my little charbroil offset. I don't think I can sit through and read the remaining 377 pages without climbing out of my skin screaming. Nice forum and lots of info for those like me who enjoy working with metal and cooking good grub!
swamperjmb is offline   Reply With Quote


Old 05-30-2013, 04:42 PM   #10933
O'Mordha
Knows what a fatty is.
 
Join Date: 12-15-10
Location: Plumas Lake, CA
Default

Check this thing out... Igotgas came in to work today and surprised me with this early Birthday gift. He used a mule deer shed that he found up in Northern California for the handle. I know you folks have built some incredible UDS's and not to take anything away from anyone, but since this one is mine, haha I am gonna have to say it is the nicest UDS that I have ever seen.

__________________
www.westernoutdoorsman.blogspot.com
O'Mordha is offline   Reply With Quote


Old 05-31-2013, 12:01 AM   #10934
angrybird
Found some matches.
 
Join Date: 05-28-13
Location: Camas, WA
Default

Hello everyone.

This is my first post. I'm so glad I found this forum. Such great information and inspiration. I'm about to start making my first UDS and have a question regarding sandblasting. I haven't read the whole thread yet (I cheated, by starting at page 600 or so), so hopefully my question hasn't been answered.

I see others mentioning that they've gotten theirs blasted for as little as $25. Where in the world are you finding these people? The cheapest quote I've gotten is $80. For that price, I can just about get a brand new drum. I've placed an add in Craigs List with no results. I've asked friends and no one knows anyone. Any suggestions?

If there is anyone in the Portland area reading this, and you know of someone that can do it for a decent price, please, please, let me know.

Thank you!
angrybird is offline   Reply With Quote


Old 05-31-2013, 07:41 PM   #10935
cheapbeer
Full Fledged Farker
 
Join Date: 07-07-12
Location: Westfield, Wisconsin
Default

I finally finished assembled my third uds, stole the basket out of number 2 due to no materials on hand. I ran a breakfast fatty through her memorial weekend and let it burn through the night. Still holding 230 in the morning. Gotta love these cans...........
Attached Images
File Type: jpg image.jpg (115.8 KB, 584 views)
__________________
2 Primo XL's, 3 (not very) Ugly Drums, 1Ugly Drum, 2 22.5 wsm's, and 2 18.5 wsm's.
cheapbeer is offline   Reply With Quote


Reply

Tags
divided circle template, uds, ugly drum, ugly drum grill, ugly drum smoker

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ugly Drum Smoker ironslob Q-talk 2 09-19-2010 10:16 AM
Ugly Drum Smoker - Need Help Bartkowiakj Q-talk 10 06-18-2010 09:38 PM
One Ugly Drum Smoker Steve_B Q-talk 15 09-21-2009 10:32 PM
My (not-so) Ugly Drum Smoker. hav Q-talk 47 11-05-2008 02:30 PM
Ceramic Cooker Meets Ugly Drum Smoker - BUDCS - Concept Drum Discussion Hook_Line_and_Sinker Q-talk 9 04-26-2008 02:24 PM

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Forum Custom Search: Enter your Search text below. GOOGLE will search ONLY the BBQ Brethren Forum.





All times are GMT -5. The time now is 07:35 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.
no new posts