拉猪肉
The BBQ BRETHREN FORUMS.


Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Brethren Banners
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, Equipment and just outdoor cookin' in general, hints, tips, tricks & techniques, success, failures... but stay on topic. And watch for that hijacking.


Reply
 
Thread Tools
Old 08-06-2006, 02:45 PM   #1
dodgeramsst2003
Full Fledged Farker
 
dodgeramsst2003's Avatar
 
Join Date: 08-01-06
Location: Flat Rock, MI
Default Calling all Michiganders, metal sources?

Guys and gals, I hope I'm posting this in the right spot. I'm going to build a new smoker over the winter and am looking for a good metal supplier in southern michigan of course I will drive a ways to get it. Mainly what I'm looking for is scrap yards that sell by the pound. Anyone know of any? gonna need angle, square tube, etc. I know I'll probably have to buy new for some of it, but I want to avoid metal express if I can, because they are simply to expensive!!!! I know I could buy a new cooker cheaper, but I like the thrill of making something and showing it off. Any help would be greatly appreciated.

Chris
dodgeramsst2003 is offline   Reply With Quote


Old 08-06-2006, 06:24 PM   #2
MilitantSquatter
Moderator
 
MilitantSquatter's Avatar
 
Join Date: 09-17-05
Location: Mooresville, NC
Default

Chris,

Unless you buy scrap material or simply do not buy from someone who knows the prices of metals, your best bet is to but from a metals service center depending on your order and size qtys.. In some cases they may not sell direct if your order value is too small.

Here are some suggestions of top tier service centers that will usually take a decent sized order. Just do a Google search for website and phone #.

Yarde Metals
Copper & Brass Sales (they sell tons of steel & aluminum too...literally !!)
Castle Metals (the parent company of Metals Express which is the equivalent of their online division that may be pricier and cater to the small one time buy.
Admiral Metals

I know Castle & Copper & Brass Sales have distribution Centers in IL, so shipping would not be too bad. It never hurts to ask for a break on shipping to see if they can cut you a deal.

Or, you can call an Industrial Supply Company like MSC Industrial (my company) or our competitor, McMaster Carr,who does a good job with raw materials too. in 90% of the cases, we buy our metals from companies like the ones above but at a much lower cost that retail and we sell in short lengths which the service centers may not do depending on order size.

Good Luck !!!
__________________
Lonestar 24" Vertical offset w/ Insulated Firebox & Performer Platinum
Former owner: Jambo Backyard, Klose BYC, Med. Spicewine, Pitts & Spitts, XL & (2) Med. BGE's, 22" WSM & (2) 18" WSM's, 18" & 22" Weber Kettles
MilitantSquatter is offline   Reply With Quote


Old 08-06-2006, 08:58 PM   #3
bbqbull
Moderator

 
bbqbull's Avatar
 
Join Date: 12-27-05
Location: Mid Michigan
Default

Padnoes Metal in Lansing Mi. Not sure of the exact spelling. Try metal recycling centers in Michigan on Google.com . I would do a google search on them, give them a call. There on the nnw side of Lansing

Mike
__________________
You have never really lived until you have done something for someone who can never repay you.


I wish my mind could forget what my eyes have seen.



Heavily medicated for your protection.




Klose Mobile Pit
Klose Owners Reccomended Pit
Cookshack Smokette
Gasser
Little Chief Smoker
Large BGE
Gifted to me my Pit Barrel Smoker
bbqbull is online now   Reply With Quote


Old 08-07-2006, 08:47 AM   #4
Neil
Quintessential Chatty Farker

 
Neil's Avatar
 
Join Date: 06-04-04
Location: St. Joseph, MI
Default

Alro Steel or Sturgis Iron & Metal. Alro has distribution centers all over the state and SIM is in Sturgis.
__________________
"You can't always get what you want but if you try sometime you just might find you get what you need"

Mange Bene Viva Bene!

NB Bandera-Firebox & Baffle Mod, WSM, Weber: Performer(Col. Steve Austin Mod), WSM, Three 22 1/2" Kettles, 2 Brinkman Dual Zone Proffessional Grills, Smoky Joe, Uniflame Tabletop Gasser, Luhr-Jensen Big Chief, Turkey Fryer, Rocky Mountain Camp Stove & 3 UDS's.
Neil is offline   Reply With Quote


Old 08-07-2006, 12:27 PM   #5
dodgeramsst2003
Full Fledged Farker
 
dodgeramsst2003's Avatar
 
Join Date: 08-01-06
Location: Flat Rock, MI
Default Thanks

Thanks guys, I've been looking and calling places, only thing is a lot of places want a minimum order of say 500 pounds, wouldn't be bad except that 500 lbs has to be all of one thing!!!! building a pit for myself, I don't exactly have a need for that much of one thing, not to mention if I buy all that extra, thats gonna add up if I have to buy angle, tube, rod, plate etc. lansing and sturgis are about 2.5 hrs drive, but I'll hitch up the trailer and make a little day trip out of it if they have what I'm looking for. Thanks again.

Chris
dodgeramsst2003 is offline   Reply With Quote


Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
Smoke from other sources phil c Q-talk 13 01-25-2012 01:15 PM
Wood sources DannyMac Q-talk 2 09-13-2010 09:09 AM
Turbinado Sugar Sources txschutte Q-talk 15 03-10-2008 09:49 AM
Meat from Cloned Sources or 'Haven't I Seen You Around Here Before?' QansasjayhawQ Q-talk 36 01-28-2008 09:05 AM
Lump Charcoal sources Grumpy's Q Q-talk 14 01-07-2008 11:59 AM

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Loading



All times are GMT -5. The time now is 11:42 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.