喂我西摩
The BBQ BRETHREN FORUMS.  


Our Homepage Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Brethren Banners(temp offline)
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, Equipment and just outdoor cookin' in general, hints, tips, tricks & techniques, success, failures... but stay on topic. And watch for that hijacking.


Reply
 
Thread Tools
Old 04-13-2014, 06:14 PM   #1
pjtexas1
somebody shut me the fark up.

 
pjtexas1's Avatar
 
Join Date: 12-28-11
Location: Belton, Tx
Default Abe's 48" insulated cabinet smoker seasoning, first cook and thoughts

My Entertainer arrived this week and I finally had time yesterday to season it.

Heavy: All 16g cold rolled steel and it weighs 425lbs. I struggled on my own to get the casters on. It has to be heavier than 425lbs.
Front.jpg

Casters: They were inside the smoker and had to be mounted with self-tapping screws (included). I like the red color but I have the larger off-road tires that will be shipping from Abe's this week. He was out of stock and wanted me to have casters until he could get the correct ones.
Casters.jpg

Exhaust Stack: Similar to other cabinets but no cap to keep out the rain. Measure 2”x4”.
Intake.jpg

Slam Latches: 1 on firebox and 2 on cook chamber. Nice feature to help keep the seal tight. They were hard to shut at first but are beginning to loosen up with use.
Latch.jpglatches.jpg

Thermometer: Large 5” Tel-Tru, can’t describe how nice this really is. It is within 5 degrees of the middle of the rack.
Thermo.jpg

Intakes: 1 on each side of the firebox that are 2”x4”. Adapter available for a Guru. They line up with slots on charcoal basket. Nice for better airflow to the charcoal.
Intake.jpg

Water Pan: Built in with drain valve on the back. After seasoning I am convinced that this smoker will require water to keep the temps down. No surprise because that is how it was designed. I will probably use a disposable/removable pan for water to make cleanup easier. For the seasoning I lined the built-in water pan with foil with no issues.
Water Pan.jpg

Rack Sliders: comes standard with 5. I had them add an extra slider for better arrangement choices. Any more and the rack catches get in the way of a full size hotel pan.
Rack Sliders.jpg

Racks: The frames are very nicely built out of ½”solid steel not thin L-brackets. Extremely heavy and measure 21”x17”. It comes standard with 2 racks. I ordered 5. Full size hotel pans fit. They are shorter than racks framed with L-brackets and give you a little more clearance. These are really heavy.
Racks.jpgRack Detail.jpg

Doors: They are inset and open a little over 90 degrees. This puts them well out of the way of the racks.
Doors.jpg

Charcoal Basket: 15”x16”x6” hanging, all 10g steel, slots on side line up with intakes, plenty of space for tons of charcoal and any size chunks, will require maze or water to keep temps down. 4.5" between charcoal basket and water pan. 2.5" between charcoal basket and heat diverter. My heat diverter is also shipping this week. This thing is very well constructed and HEAVY. Did I mention this thing was heavy? It is almost too heavy if that is possible.
Charcoal Basket.jpg

Ash Pan: This is shipping this week.

Opinions.....

Kevin at Abe's is a really nice guy but is extremely busy. The best way to reach him is by text. My smoker had a dent and scratches that occurred during shipping. The shipping company removed it from the original pallet and did not strap it down to the new pallet. It obviously moved around in the back of the truck. I was not happy. Kevin has offered to have a local company in my area sandblast and re-powder coat the smoker as well as fix the dent.

It holds temps very well but will require water or a maze to keep temps below 350. It is built like a tank and I cannot wait until my next cook.

Seasoning Notes.....
60 degrees out, 30 mph winds, no water
9:00am: started with ¾ chimney of fully lit Stubbs briqs (3lbs). No other charcoal or chunks were added.
9:15am: 225 / 9:22am: 250 / 9:27am: 280 / 9:37am: 325 / 9:45am: 350
9:50am: biscuit test / 10:05am: biscuits done / top rack is 15 degrees hotter than bottom rack, all others are within 3-4 degrees of each other
2nd pic is how they were on the racks from top (far left in the pan) to bottom (far right in the pan).
Biscuit Test.jpgBiscuits Pan.jpg
11:00am: 355, added 1lb of unlit briqs, only small pieces left in firebox
11:00am: put naked fatty on
Fatty.jpg
11:45am: fatty at 170, done (well a little over-done)
Fatty Done.jpg
1:20pm: added another 2lbs of unlit briqs and 2 large pecan chunks
1:25pm: 350 / put spare ribs on (cut in half to speed up cooking because we had surprise guests wanting to taste-test some ribs)
2:30pm: foiled / 3:00pm: pulled 1st half-rack, tender. Unfoiled 2nd rack / 3:30pm: pulled 2nd half-rack, darker color, even more tender
Forgot to take pictures of the ribs. Here is all I have.
Ribs.jpg


4:30pm: 350 / 5:15pm: 345 / 6:00pm: 295 / 6:30pm: 250
9 hours on 6lbs of charcoal at roughly 350 the whole time.
__________________
Paul

Shirley Fabrication 24x55 Straight Back Cabinet 4 Racks
Abe's Smokers 48" Entertainer
Custom 20x52 vertical / 28" Blackstone
22.5 OTG, Jimmy with CB Roti, Mini
Red Box Smoker on Custom Cart

Join us for our Texas Fall Bash - November 19th
http://www.bbq-brethren.com/forum/sh...d.php?t=228753

Last edited by pjtexas1; 04-13-2014 at 09:01 PM..
pjtexas1 is offline   Reply With Quote


1 members found this post helpful.
Old 04-13-2014, 06:21 PM   #2
tgstrang
Full Fledged Farker

 
tgstrang's Avatar
 
Join Date: 07-30-13
Location: O'fallon, MO
Default

That thing looks like its built like a tank. Thanks for the review and congrats on the new toy!
__________________
"Big MO Shirley", UDS, Akorn, 2 22in Kettles, Blacktone Griddle & Pizza Oven

I'm Thomas, friends call me T
tgstrang is offline   Reply With Quote


Thanks from:--->
Old 04-13-2014, 06:28 PM   #3
peeps
somebody shut me the fark up.

 
peeps's Avatar
 
Join Date: 08-09-13
Location: Round Rock, TX
Default

That's a good looking cooker! Congrats!
__________________
***** North Texas Brethren Bash - Spring 2015 - In Planning Now ***** (link)

- Earl - My Custom Vertical Offset Smoker by AJ's Custom Cookers (build link)
- Colt - Superior SS-2 w/ DigiQ DXII- Courtesy of Gainesville Jaycees and Superior Smokers
- Weber Kettle 22.5 OTG w/ Craycort Cast Iron Grates
- Major - Mini WSM (from SJS)

Certified IMBAS MOINK Baller! (Certificate of Authenticity) / Join the fun in the Throwdowns!
peeps is offline   Reply With Quote


Thanks from:--->
Old 04-14-2014, 06:59 PM   #4
gun smoke
Full Fledged Farker

 
gun smoke's Avatar
 
Join Date: 11-05-13
Location: northern mi.
Default

great pictures and a great review thanks!!
gun smoke is offline   Reply With Quote


Thanks from:--->
Old 04-14-2014, 07:09 PM   #5
pjtexas1
somebody shut me the fark up.

 
pjtexas1's Avatar
 
Join Date: 12-28-11
Location: Belton, Tx
Default

Quote:
Originally Posted by gun smoke View Post
great pictures and a great review thanks!!
Thanks! I tried to be objective. I will update when the rest of my parts come in next week and when I try the snake/maze in the firebox. I need to figure out how to keep the temps down without water. I know....it was designed to use water but I bet it can be done without it.
__________________
Paul

Shirley Fabrication 24x55 Straight Back Cabinet 4 Racks
Abe's Smokers 48" Entertainer
Custom 20x52 vertical / 28" Blackstone
22.5 OTG, Jimmy with CB Roti, Mini
Red Box Smoker on Custom Cart

Join us for our Texas Fall Bash - November 19th
http://www.bbq-brethren.com/forum/sh...d.php?t=228753
pjtexas1 is offline   Reply With Quote


Old 04-14-2014, 09:36 PM   #6
cameraman
Babbling Farker

 
Join Date: 08-31-09
Location: Nashville, TN
Default

I think you're going to enjoy that. Looking forward to your update.
__________________
[COLOR=RoyalBlue][SIZE=3]Dave [/SIZE][/COLOR]
[COLOR=Gray]22.5 WSM
22.5 OTS Weber kettle
Smokey Joe (RIP)
a dorky little headlamp[/COLOR]
cameraman is offline   Reply With Quote


Thanks from:--->
Old 04-14-2014, 11:30 PM   #7
tsimm15
is one Smokin' Farker
 
Join Date: 02-19-14
Location: Albuquerque, NM
Default

Pit looks fantastic.
tsimm15 is offline   Reply With Quote


Thanks from:--->
Old 04-15-2014, 12:03 AM   #8
retired trucker
is One Chatty Farker
 
Join Date: 09-28-11
Location: Dallas, Georgia
Default

Great review and pictures help us "be there". Could almost smell the fatty cooking! Impressed that it only used 6 pounds of charcoal in 9 hours. You are going to love using this smoker and it will probably get lots of "surprise guests" showing up to "ooo and aaahh" over it and enjoy whatever you cook on it. (Peeps, Sliding Billy, etc ) Congratulations on your choice of smoker. Now go forth and cook lots of Q in it.

Blessings,
Omar
__________________
Webber 22 1/2 OTG Gold, UDS, rusted out chimney, Red Lavatools Thermowand, Maverick ET 732, 1950 model wife. Walking cane to help me get around.
retired trucker is offline   Reply With Quote


Thanks from:--->
Old 04-15-2014, 12:11 AM   #9
pjtexas1
somebody shut me the fark up.

 
pjtexas1's Avatar
 
Join Date: 12-28-11
Location: Belton, Tx
Default

Quote:
Originally Posted by retired trucker View Post
Great review and pictures help us "be there". Could almost smell the fatty cooking! Impressed that it only used 6 pounds of charcoal in 9 hours. You are going to love using this smoker and it will probably get lots of "surprise guests" showing up to "ooo and aaahh" over it and enjoy whatever you cook on it. (Peeps, Sliding Billy, etc ) Congratulations on your choice of smoker. Now go forth and cook lots of Q in it.

Blessings,
Omar
Thanks! Everyone is welcome...except that Smitty guy. I don't know if we can trust him around a new cabinet smoker.
__________________
Paul

Shirley Fabrication 24x55 Straight Back Cabinet 4 Racks
Abe's Smokers 48" Entertainer
Custom 20x52 vertical / 28" Blackstone
22.5 OTG, Jimmy with CB Roti, Mini
Red Box Smoker on Custom Cart

Join us for our Texas Fall Bash - November 19th
http://www.bbq-brethren.com/forum/sh...d.php?t=228753
pjtexas1 is offline   Reply With Quote


Old 04-15-2014, 12:18 AM   #10
retired trucker
is One Chatty Farker
 
Join Date: 09-28-11
Location: Dallas, Georgia
Default

Quote:
Originally Posted by pjtexas1 View Post
Thanks! Everyone is welcome...except that Smitty guy. I don't know if we can trust him around a new cabinet smoker.
You are probably right, especially one on wheels. However, you did mention that it was heavy I think. Could be a deciding factor if you locked the wheels and limited his intake of "adult beverages"!

Blessings,
Omar
__________________
Webber 22 1/2 OTG Gold, UDS, rusted out chimney, Red Lavatools Thermowand, Maverick ET 732, 1950 model wife. Walking cane to help me get around.
retired trucker is offline   Reply With Quote


Thanks from:--->
Old 04-15-2014, 05:58 AM   #11
Flobee1kenobi
Is lookin for wood to cook with.
 
Join Date: 09-20-10
Location: Dayton, Ohio
Default

Thanks for the review. I am picking up my own, all black entertainer this Friday :hopefully:
I was really curious how the casters were attached, having ordered mine without. I have a set of huge offroad casters that will look great on it.

I will post pics when I take ownership later this week.....
__________________
Abe's Entertainer, 1979 weber kettle

Last edited by Flobee1kenobi; 04-15-2014 at 09:35 AM..
Flobee1kenobi is offline   Reply With Quote


Thanks from:--->
Old 04-15-2014, 07:13 AM   #12
pjtexas1
somebody shut me the fark up.

 
pjtexas1's Avatar
 
Join Date: 12-28-11
Location: Belton, Tx
Default

Quote:
Originally Posted by Flobee1kenobi View Post
Thanks for the review. I am picking up my own, all black entertainer this thursday :hopefully:
I was really curious how the casters were attached, having ordered mine without. I have a set of huge offroad casters that will look great on it.

I will post pics when I take ownership later this week.....
Congrats! Can't wait to see pics of those casters. 1 more member is getting his soon also. I wonder if there are any others? Maybe we can catch up to Mike and that group of Lonestar Grillz guys.
__________________
Paul

Shirley Fabrication 24x55 Straight Back Cabinet 4 Racks
Abe's Smokers 48" Entertainer
Custom 20x52 vertical / 28" Blackstone
22.5 OTG, Jimmy with CB Roti, Mini
Red Box Smoker on Custom Cart

Join us for our Texas Fall Bash - November 19th
http://www.bbq-brethren.com/forum/sh...d.php?t=228753
pjtexas1 is offline   Reply With Quote


Old 04-15-2014, 09:49 AM   #13
alamar
Found some matches.
 
alamar's Avatar
 
Join Date: 12-23-13
Location: St. Clair Shores, MI
Default

I too have one of the Abe's Smokers (the 60" model). It is very well built and weighs in at 475 pounds. I am local to Kevin's shop so I stopped by and took a look before buying. Everything is high quality with the walls filled with ceramic wool insulation that makes holding temp very easy. We had the harshest winter on record for the Detroit area with many days near 20 below zero temps. This cooker performed even in those temps. I am pulling together the cash for the guru and the wifi contoller to make the "system" even more automatic. It is a great purchase.
alamar is offline   Reply With Quote


Thanks from: --->
Old 04-15-2014, 10:02 AM   #14
alamar
Found some matches.
 
alamar's Avatar
 
Join Date: 12-23-13
Location: St. Clair Shores, MI
Default

Here is a pic of the 60 incher...I know this is not legal in many states.....LOL
Attached Images
File Type: jpg 14 - 1.jpg (45.1 KB, 1164 views)

Last edited by alamar; 04-15-2014 at 10:09 AM.. Reason: Pic not working
alamar is offline   Reply With Quote


Thanks from: --->
Old 04-15-2014, 10:11 AM   #15
alamar
Found some matches.
 
alamar's Avatar
 
Join Date: 12-23-13
Location: St. Clair Shores, MI
Default

Here is a pic of the 60 incher...I know this is not legal in many states.....LOL

alamar is offline   Reply With Quote


Thanks from:--->
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Forum Custom Search: Enter your Search text below. GOOGLE will search ONLY the BBQ Brethren Forum.





All times are GMT -5. The time now is 10:30 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.
no new posts