The BBQ BRETHREN FORUMS.


Forum Portal Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Brethren Banners
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Brethren Sales and Ventures > Brethren Ventures > Gravity Fed smokers and Grills

Notices

Gravity Fed smokers and Grills We are the inventors of these Gravity Fed Smokers and Grills. Innovative and efficient, these BBQ Grills and smokers can burn multi-fuel of charcoal, Wood Pellet, Wood Chunks, Wood Logs and reach temps of 300C or 572 F.


Reply
Thread Tools
Unread 01-25-2014, 11:23 PM   #1
woodpelletsmoker
is One Chatty Farker

 
Join Date: 03-29-11
Location: Beijing,China
Downloads: 0
Uploads: 0
Default Attention please, buyers of wGrill V1, Please contact me for free V2

Now 50 pieces of wGrill V2 are ready.
I will give free V2 to all old buyers of V1.
Due to virus I lost buyer list in my computer.
All old buyers, Please contact me.
So far I get contact of 4 old buyers only, and I have sent out the 4 pieces
woodpelletsmoker is offline   Reply With Quote
Unread 01-26-2014, 10:54 AM   #2
Pole D
Full Fledged Farker
 
Join Date: 09-06-09
Location: Cary, NC
Downloads: 0
Uploads: 0
Default

Hi - I purchased the wGrill v1. On Jan 22, 2014 I paid the $1 for wGrill v2 using the link you provided in the other thread.

Please let me know if I need to do anything else.
Pole D is offline   Reply With Quote
Unread 01-26-2014, 06:38 PM   #3
woodpelletsmoker
is One Chatty Farker

 
Join Date: 03-29-11
Location: Beijing,China
Downloads: 0
Uploads: 0
Default

Checking your eBay account please , I sent already
woodpelletsmoker is offline   Reply With Quote
Unread 01-26-2014, 07:32 PM   #4
woodpelletsmoker
is One Chatty Farker

 
Join Date: 03-29-11
Location: Beijing,China
Downloads: 0
Uploads: 0
Default

Senior, Junior and wGrill V2 use same probe.

wGrill V1 uses same probe but with different wiring.
If you want to use probe of wGrill V1 on Senior, Junior and V2, you need to re-solder as below.
woodpelletsmoker is offline   Reply With Quote
Unread 01-31-2014, 03:58 PM   #5
Will work for bbq
Babbling Farker

 
Will work for bbq's Avatar
 
Join Date: 06-23-10
Location: Moominland formerly known as Earth.
Downloads: 13
Uploads: 0
Default

Thanks Wang I just received V2 today. Is there a user manual for making the settings? I tried the V1 manual but the buttons and parameters are different.
__________________
Paul
00 Slowskys Racing
CharGriller Acorn Komado AKA Milton (RIP), WGA, WSM 18.5", WSM 22.5" BBQ Guru Digi Q, Weber Kettles, Genisis Gold Gasser, Orange and Red ThermaPens and a Partridge in a Avocado tree.

Agent 000 (Double O Zero)
Certified MOINK Baller
CLICK HERE to visit the BBQ Brethren Throwdowns
When all else fails just ask yourself, WWGALD???
Super sexy Farkernaut Avatar by N8man
Will work for bbq is offline   Reply With Quote
Unread 01-31-2014, 10:25 PM   #6
woodpelletsmoker
is One Chatty Farker

 
Join Date: 03-29-11
Location: Beijing,China
Downloads: 0
Uploads: 0
Default


Light:
LINK:If light ON, WIFI is normal
ALARM:High/Low temperature alarm
IN1:Probe #1,
IN2:Probe #2
Buttons:
POWER:Power on/off
SET:Function #1, program alarm,
Function #2, set WIFI Setup
↑ Function #1: set data
Function #2: showing in C/F option
↓Function #1, program alarm,
Function #2, option of probe #1, or #2
OK:Function #1: confirm,
Function #2, Alarm sound Off

Alarm Set:
Press "IN" to let "IN1" on set Probe #1
Press "SET"
use buttons of "↑" and "↓" to change data of digital #3,
press "OK" to save digital #3
use buttons of "↑" and "↓" to change data of digital #2
press "OK" again to set digital #2
press "OK" third time to set digital #1.
Low temp. alarm is done
press "OK" 4th time to set digital #3
press "OK" 5th time to set digital #2
Press "OK" 6th time to set digital #1
High temp. alarm is done

Press "IN" to let "IN2" on.
repeat above steps to set probe #2

Search WIFI signal of hl-link in your computer and smart phone and connect it,
visit http://192.168.01 to find following temp.-time curve


You can select showin of present temp.-time curve,the real, or
the past temp.-time curve, the history
Also you can select showing in F or C


Press "POWER" to turn off
Press "SET" and hold till appearing "----"
Search WIFI signal of "hl-link" by computer, and conenct it
from browser to visit http://192.168.0.1
to press "Resum" to enter setup page



Setup of direct visit from computer or smart phone
WPA2/AES SecuKey needs at least 8 digitals
press "SAVE", LINK light will off, and the on again
Search WIFI signal of "hl-link" from computer and connect it
in brower, visit http://192.168.0.1


Setup of accessing Router
About IP address:
address of TP-LINK Router usually is 192.168.1.1,
first 3 data of wGrill IP address must be same as Router.
say 192.168.1.10
address of D_LINK Router usually is 192.168.0.1,
then you need to set wGrill IP address as
192.168.0.x,say 192.168.0.10;
Netmask usually is 255.255.255.0
press "SAVE", "LINK" light will be off and then on later.
enter Router and you can visit http://192.168.1.10   

Last edited by woodpelletsmoker; 01-31-2014 at 11:07 PM..
woodpelletsmoker is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Loading



All times are GMT -5. The time now is 02:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.
no new posts