The BBQ BRETHREN FORUMS.


Forum Portal Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Brethren Banners
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, Equipment and just outdoor cookin' in general, hints, tips, tricks & techniques, success, failures... but stay on topic. And watch for that hijacking.


Reply
Thread Tools
Unread 11-20-2013, 04:44 AM   #1
BigBellyBBQ
is One Chatty Farker

 
BigBellyBBQ's Avatar
 
Join Date: 11-15-08
Location: Lake View, New York
Downloads: 1
Uploads: 0
Default leather welding gloves

Our local Harbor Frieght had welding gloves on special for 9.99 for a three pack. This is not a place to buy any type of tools, however these leather gloves serve the purpose for fire pitt duties and such..Last year I bought rubber tarp tie downs and they lasted 3 days and all 10 of them snapped..My friend bought a chop saw and motor burned up after 6 uses...They also have a heavy duty leather glove that did hold up also..
__________________
TwinTech Pro Double, Backwoods Fat Boy, TwinTech Hawg Kooker, FE 400, SP SPK 700, Empty check book and understanding wife...sometimes..
BigBellyBBQ is online now   Reply With Quote


Unread 11-20-2013, 05:34 AM   #2
sliding_billy
Quintessential Chatty Farker
 
sliding_billy's Avatar
 
Join Date: 08-27-13
Location: Princeton, TX
Downloads: 0
Uploads: 0
Default

Funny, I buy almost nothing at Harbor Freight but I get welding gloves there too.
sliding_billy is offline   Reply With Quote


Unread 11-20-2013, 05:45 AM   #3
ButtBurner
is Blowin Smoke!

 
ButtBurner's Avatar
 
Join Date: 12-18-12
Location: Dearborn Mi, Manton Mi
Downloads: 2
Uploads: 0
Default

I buy all kinds of things there, never a problem.

I usually dont buy every day use power tools there, but for tools that wont see a lot of use I do.

I go to their website for reviews. They are very revealing on what is junk and what is not
__________________
Ok Joe Offset, New Braunfels El Dorado, Weber OTS 22.5 & 18.5, (2) Master Forge Charcoal, Auber ATC, charcoal retort Weber drum rotisserie

Member Great Lakes BBQ Assn

Last edited by ButtBurner; 11-20-2013 at 06:08 AM..
ButtBurner is offline   Reply With Quote


Unread 11-20-2013, 06:10 AM   #4
Garrett
is One Chatty Farker

 
Garrett's Avatar
 
Join Date: 10-03-12
Location: Gastonia North Carolina
Downloads: 0
Uploads: 0
Default

The thing I like most about using welding gloves to tend fires and lift basket in and out of my UDS is when I'm welding, I always get a smell of the grease drippings and such.





I have bought lots of things from HF, and always get the warranty. The only time I've had to use the warranty was on an 18v cordless drill. It quit charging. Got it replaced and it has been working with problems for almost 2 yrs. I also have their Chicago electric brand 90 amp flux core and really like it for small jobs. My advice is to get the warranty on anything you buy there if they offer it.
__________________
My arsenal, Stumps Clone, Two Modified offsets, open pit with grate and rotisserie,UDS, and a free to me Weber One Touch Silver 18.5" kettle
Garrett is offline   Reply With Quote


Unread 11-20-2013, 06:16 AM   #5
ButtBurner
is Blowin Smoke!

 
ButtBurner's Avatar
 
Join Date: 12-18-12
Location: Dearborn Mi, Manton Mi
Downloads: 2
Uploads: 0
Default

Quote:
Originally Posted by Garrett View Post
The thing I like most about using welding gloves to tend fires and lift basket in and out of my UDS is when I'm welding, I always get a smell of the grease drippings and such.





I have bought lots of things from HF, and always get the warranty. The only time I've had to use the warranty was on an 18v cordless drill. It quit charging. Got it replaced and it has been working with problems for almost 2 yrs. I also have their Chicago electric brand 90 amp flux core and really like it for small jobs. My advice is to get the warranty on anything you buy there if they offer it.
I also have that welder. Works great as you said.
__________________
Ok Joe Offset, New Braunfels El Dorado, Weber OTS 22.5 & 18.5, (2) Master Forge Charcoal, Auber ATC, charcoal retort Weber drum rotisserie

Member Great Lakes BBQ Assn
ButtBurner is offline   Reply With Quote


Thanks from:--->
Unread 11-20-2013, 06:36 AM   #6
slow-smoker
is one Smokin' Farker

 
slow-smoker's Avatar
 
Join Date: 04-05-12
Location: Charlottesville, VA
Downloads: 1
Uploads: 0
Default

I use leather welding gloves as well. After a few burns from the firebox on my offset, I also remember to wear them.
__________________
____
____
-Mike
_

48" Klose Backyard Chef, _ Primo Oval XL
Stealth-Grey Thermapen, Maverick ET-732
slow-smoker is offline   Reply With Quote


Thanks from:--->
Unread 11-20-2013, 06:51 AM   #7
jamus34
Full Fledged Farker
 
Join Date: 07-09-12
Location: Middlesex NJ
Downloads: 0
Uploads: 0
Default

Only time I buy tools from HF is when I know I'll only need to use it once or twice or if there's no moving parts. I would never buy any type of power equipment from them.

I did by a mag-bowl that seems like it's pretty solid and what they call I think liquid safety gloves with sewn on full arm sleeves. I use them to clean my fishtank and they seem to do pretty good. I'd like to get a pair of their insulated rubber gloves for pork pulling purposes but I haven't yet.

Welders gloves also sound like a good idea for charcoal handling.
__________________
Proud owner of:

22.5 OTS, 22.5 WSM, SJG (and soon to have the tamale pot mini-WSM conversion built)

Stealth gray Thermopen

jamus34 is offline   Reply With Quote


Unread 11-20-2013, 07:44 AM   #8
peeps
Babbling Farker

 
peeps's Avatar
 
Join Date: 08-09-13
Location: Denton, TX
Downloads: 5
Uploads: 0
Default

I got my floor jack there and it seems pretty solid. Also get my BBQ welding gloves there.
__________________
***** North Texas Spring Bash - April 12th, 2014 - Click for More Details!!! *****

- Earl - My Custom Vertical Offset Smoker by AJ's Custom Cookers (build link)
- Colt - Superior SS-2 - Courtesy of Gainesville Jaycees and Superior Smokers
- Weber Kettle 22.5 OTG w/ Craycort Cast Iron Grates
- Major - Mini WSM (from SJS)

Certified IMBAS MOINK Baller! (Certificate of Authenticity) / Join the fun in the Throwdowns!
peeps is offline   Reply With Quote


Unread 11-20-2013, 07:57 AM   #9
Q Junkie
Full Fledged Farker

 
Q Junkie's Avatar
 
Join Date: 07-07-12
Location: San Marcos, CA
Downloads: 0
Uploads: 0
Default

Ah, the "Bent Tool Store". As long as you know going in that the tool may only last a few times, it has very low prices. The welding gloves from there are perfect for BBQ but not very good for welding if you weld a lot.
Q Junkie is offline   Reply With Quote


Unread 11-20-2013, 08:03 AM   #10
tnjimbob
Full Fledged Farker
 
tnjimbob's Avatar
 
Join Date: 02-02-12
Location: Nashville, Tn
Downloads: 0
Uploads: 0
Default

I bought some welding gloves to use when grilling/smoking, but the liner ripped out of them in a few uses and I haven't replaced them yet. I buy their 5mm nitrile gloves by the box when they go on sale, and I have a chop saw that I use for cutting down wood into chunks and I haven't had a problem with it so far. I did buy the extended warranty for that, however.
__________________
Traeger Lil' Tex Elite, WSM, Green SS Performer, 22" OTG, hyperfast orange Thermapen. CBJ.
tnjimbob is offline   Reply With Quote


Unread 11-20-2013, 08:05 AM   #11
Truck Stop BBQ
Is lookin for wood to cook with.
 
Join Date: 11-17-13
Location: So California
Downloads: 0
Uploads: 0
Default

I buy cut off wheels, some sandpaper and other disposables at HF. The one thing I like is their prices on rubber gloves which they tend to have on sale frequently. The best thing I have found is their rubber gloves come in sizes for those of us with big paws instead of "One size fits NONE".

RUDEMIX
__________________
RUDEMIX - Klose 20X40 BYC - illegitimi non carborundum
Truck Stop BBQ is offline   Reply With Quote


Unread 11-20-2013, 09:08 AM   #12
luke duke
is One Chatty Farker

 
Join Date: 01-16-10
Location: Dallas, TX
Downloads: 0
Uploads: 0
Default

Harbor Freight definitely has some gems. Here are some examples that I've found:

Propane Torch
http://www.harborfreight.com/propane-torch-91033.html

Torque Wrench
http://www.harborfreight.com/1-2-hal...rench-239.html

Workbench
http://www.harborfreight.com/60-inch...nch-93454.html

Furniture Dolly
http://www.harborfreight.com/movers-dolly-93888.html
luke duke is offline   Reply With Quote


Unread 11-20-2013, 09:30 AM   #13
RClark115
Got Wood.
 
Join Date: 10-13-13
Location: Anaheim, ca
Downloads: 0
Uploads: 0
Default

I bought my weed burner propane torch there, for lighting my UDS and it works very well. The rest you get what you pay for. Bought a grinder, which I only use for wire brushing, and it gets hot quick, but works for small jobs
RClark115 is offline   Reply With Quote


Unread 11-20-2013, 09:32 AM   #14
ssv3
is One Chatty Farker

 
ssv3's Avatar
 
Join Date: 07-25-12
Location: Los Angeles
Downloads: 0
Uploads: 0
Default

Ive got the welding gloves as well. Theyre holding up real well and I use them a lot. There are some gems at HF for sure.
__________________
36" DCS NG Grill - Vision Kamado PRO - 36" Blackstone Griddle LP-'10 Weber Performer-PBC
ssv3 is offline   Reply With Quote


Unread 11-20-2013, 09:35 AM   #15
ButtBurner
is Blowin Smoke!

 
ButtBurner's Avatar
 
Join Date: 12-18-12
Location: Dearborn Mi, Manton Mi
Downloads: 2
Uploads: 0
Default

I just bought one of those 17ft multi folding ladders from them for $119

the exact same ladder (same brand and model #) on Amazon is $179
__________________
Ok Joe Offset, New Braunfels El Dorado, Weber OTS 22.5 & 18.5, (2) Master Forge Charcoal, Auber ATC, charcoal retort Weber drum rotisserie

Member Great Lakes BBQ Assn
ButtBurner is offline   Reply With Quote


Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Loading



All times are GMT -5. The time now is 02:44 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.
no new posts