The BBQ BRETHREN FORUMS.  


Our Homepage Donation to Forum Overhead Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Amazon Affiliate
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking.


Reply
 
Thread Tools
Old 11-15-2013, 12:35 PM   #1
Wicked Smoke BBQ
On the road to being a farker
 
Join Date: 08-27-13
Location: Canton, NC
Default Those of you with Assassin smokers

Especially those of you with the 28 model. Do you find that it takes a long time for the temp to rebound after opening with the 10cfm fan? I'm thinking about moving up to the 25cfm and I want to get others opinions before I do.
__________________
Wicked Smoke BBQ Company | Myron Mixon 72xc | Rec-Tec 680 |www.wickedsmokebbq.com |
Wicked Smoke BBQ is offline   Reply With Quote


Old 11-15-2013, 12:47 PM   #2
PaPaQ
is One Chatty Farker

 
PaPaQ's Avatar
 
Join Date: 02-07-07
Location: Midland, NC
Default

Where is the damper set on the fan? Just like firing it up, if you make it recover to quickly it will probably over shoot. Sometimes I will shut the Guru off, take meat out, foil and do others things then shut the door and let it recover on its own for about 5 min before turning the fan back on.
__________________
SCBA CMJ
CBL CMJ
PaPaQ is offline   Reply With Quote


Old 11-15-2013, 12:51 PM   #3
Wicked Smoke BBQ
On the road to being a farker
 
Join Date: 08-27-13
Location: Canton, NC
Default

Quote:
Originally Posted by PaPaQ View Post
Where is the damper set on the fan? Just like firing it up, if you make it recover to quickly it will probably over shoot. Sometimes I will shut the Guru off, take meat out, foil and do others things then shut the door and let it recover on its own for about 5 min before turning the fan back on.
Wide open, along with ball valve being wide open.
__________________
Wicked Smoke BBQ Company | Myron Mixon 72xc | Rec-Tec 680 |www.wickedsmokebbq.com |
Wicked Smoke BBQ is offline   Reply With Quote


Old 11-15-2013, 12:54 PM   #4
PaPaQ
is One Chatty Farker

 
PaPaQ's Avatar
 
Join Date: 02-07-07
Location: Midland, NC
Default

How long is it taking to recover? It shouldn't take long with the damper wide open.
__________________
SCBA CMJ
CBL CMJ
PaPaQ is offline   Reply With Quote


Old 11-15-2013, 12:56 PM   #5
Wicked Smoke BBQ
On the road to being a farker
 
Join Date: 08-27-13
Location: Canton, NC
Default

Quote:
Originally Posted by PaPaQ View Post
How long is it taking to recover? It shouldn't take long with the damper wide open.
In excess of 15 minutes or more sometime. Now, this was with Kingsford regular. I've since moved to RO lump and haven't tested it but I thought it was strange it was taking so long to recover back to the temp set on the DigiQ
__________________
Wicked Smoke BBQ Company | Myron Mixon 72xc | Rec-Tec 680 |www.wickedsmokebbq.com |
Wicked Smoke BBQ is offline   Reply With Quote


Old 11-15-2013, 01:02 PM   #6
PaPaQ
is One Chatty Farker

 
PaPaQ's Avatar
 
Join Date: 02-07-07
Location: Midland, NC
Default

10 to 15 min is about what my SS-2 takes to recover on Rancher, you should see a little difference with the lump and you may have to adjust the damper a little, just keep a watch on it.
__________________
SCBA CMJ
CBL CMJ
PaPaQ is offline   Reply With Quote


Old 11-15-2013, 02:15 PM   #7
ajstrider
is One Chatty Farker
 
Join Date: 09-02-12
Location: Kentucky
Default

I would think 15 or 20 minutes is a respectable recovery time, you have a lot of cubic feet of air space to reheat. This is why the olf saying came about, "if you're looking, you ain't cooking". Imagine an uninsulated cooker. You might turn the "open door" feature off and see if that helps at all.
__________________
XL Big Green Egg, Weber kettles, WSM 22.5" and Pellet Pro adapter
ajstrider is offline   Reply With Quote


Old 11-15-2013, 07:37 PM   #8
mep
Full Fledged Farker
 
mep's Avatar
 
Join Date: 06-11-13
Location: Kansas City, MO
Default

I have a regular Assassin and unless I leave the door open a long time, it will recover in about 10 minutes. I think that the 25cfm fan would be overkill.
__________________
Assassin Smoker; Large BGE; Char-Broil Gasser; Black Thermapen; Looftlighter; KCBS CBJ
mep is offline   Reply With Quote


Old 11-15-2013, 11:34 PM   #9
Picketwire BBQ
On the road to being a farker
 
Join Date: 10-27-13
Location: Mesquite TX
Default

Picked up my assassin 28 about 5 hours ago and i think that the 10 cfm is overkill….just my first impressions.
__________________
The Good One Openrange, The Good One Rodeo, Jambo J3, Epicoa Rotisserie Grill, ASSASSIN 28
Picketwire BBQ is offline   Reply With Quote


Old 11-15-2013, 11:41 PM   #10
treytexag
On the road to being a farker
 
Join Date: 06-19-12
Location: Houston, Texas
Default

Agree with Picket and MEP. After I open my door to "play with the meat" whether it is checking, rotating, moving, peeking, wrapping, or basting my meat, Assassin recovers back to temp in just minutes flat. Like 5 minutes, I don't ever recall as long as 10 minutes. And that's with the 10 cfm blower, viper knife valve open all the way, ball valve open about 1/3.

25 cfm blower is unnecessary, and may even be detrimental to performance. YMMV.
treytexag is offline   Reply With Quote


Old 11-16-2013, 10:46 AM   #11
GoolsbyMD
Full Fledged Farker
 
Join Date: 07-19-13
Location: Chesapeake, VA
Default

I not familiar with the size of the 28 or here to suggest one is better than the other. But with a 10cfm fan my stumps baby recovers from 160s-225 in roughly 10 mins.
__________________
US Navy. WSM 18.5", Stumps Smoker Baby, SF 24x48 RF, Weber OTG.
GoolsbyMD is offline   Reply With Quote


Old 11-16-2013, 01:47 PM   #12
Picketwire BBQ
On the road to being a farker
 
Join Date: 10-27-13
Location: Mesquite TX
Default

I think the 4 cfm would be adequate, or better yet a variable speed set up like a PitmasterIQ.
__________________
The Good One Openrange, The Good One Rodeo, Jambo J3, Epicoa Rotisserie Grill, ASSASSIN 28
Picketwire BBQ is offline   Reply With Quote


Old 11-16-2013, 04:47 PM   #13
Picketwire BBQ
On the road to being a farker
 
Join Date: 10-27-13
Location: Mesquite TX
Default

If I may ask, how are y'all feeding wood? chute or in the ash pan?
__________________
The Good One Openrange, The Good One Rodeo, Jambo J3, Epicoa Rotisserie Grill, ASSASSIN 28
Picketwire BBQ is offline   Reply With Quote


Old 11-16-2013, 05:05 PM   #14
Biged92
On the road to being a farker

 
Biged92's Avatar
 
Join Date: 03-30-12
Location: Huntington Beach, California
Default

I only have about 10 cooks on the Assassin28, so I am still learning all of the little quirks to make it run the way I want it too. But in my opinion I wouldn't go any higher than a 10 cfm fan. I have used the 10 cfm fan (w/ the ball valve wide open) with both the Guru and a Stoker on the Assassin28. With the Guru, it takes about 45 min to come to temp, and 10 min to recover when the door is opened. Less if I don't have the door open to long (like when I am just spritzing ribs). I do not use the open lid detection on the Guru, nor do I turn it off when I open the door. Overall the Guru works great with the 10 cfm fan.

The 10 cfm fan on the Stoker seems to have a lot more power. With the Stoker it took 20 min to come up to temp, and about 5 min to recover when the door is opened, regardless of how long. But with the Stoker, the temp has over shot on a couple of occasions when the door was opened. With the Stoker I do turn it off before I open the door, and give it a couple of min for the temp stabilize when it’s closed before I turn the Stoker back on. With that said, I have an extra 5 cfm fan for the Stoker that I am going to try out. I think the smaller fan will work a lot better with the Stoker for the overall cook. The only downside is that it may take the cooker a little longer to initially come up to temp.

I hope this helps.
__________________
Big Ed
Sharpe Gourmet Cooking Wood

22.5 WSM w/ WiFi Stoker | 22.5" OTS | Assassin28 | Traeger Lil Tex Elite | GMG Daniel Boone
Biged92 is offline   Reply With Quote


Old 11-16-2013, 05:33 PM   #15
Wicked Smoke BBQ
On the road to being a farker
 
Join Date: 08-27-13
Location: Canton, NC
Default

Thanks for all the replies guys. Have to say that with the cook last night and using nothing but Royal Oak the temp recovered very quickly with the 10cfm fan. I think the problem was the Kingsford just wasn't putting out the heat that RO was.
__________________
Wicked Smoke BBQ Company | Myron Mixon 72xc | Rec-Tec 680 |www.wickedsmokebbq.com |
Wicked Smoke BBQ is offline   Reply With Quote


Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Forum Custom Search: Enter your Search text below. GOOGLE will search ONLY the BBQ Brethren Forum.





All times are GMT -5. The time now is 07:09 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.
no new posts