The BBQ BRETHREN FORUMS.  



Our Homepage Donation to Forum Overhead Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Amazon Affiliate
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, equipment and outdoor cookin' . ** Other cooking techniques are welcomed for when your cookin' in the kitchen. Post your hints, tips, tricks & techniques, success, failures, but stay on topic and watch for that hijacking.


Reply
 
Thread Tools
Old 10-21-2013, 01:52 PM   #1
Dadeo719
is one Smokin' Farker
 
Join Date: 10-02-13
Location: Georgetown, KY
Default Pre-built firebox

Can one of these be used as firebox for say for a 275 gallon vertical fuel tank build?
__________________
Self-proclaimed "VILLAGE IDIOT" with 4 UDSs and a POS char-broil 24in charcoal grill.

Last edited by Dadeo719; 01-02-2015 at 09:03 PM..
Dadeo719 is offline   Reply With Quote


Old 10-21-2013, 02:12 PM   #2
Bludawg
somebody shut me the fark up.
 
Bludawg's Avatar
 
Join Date: 07-04-09
Location: Jonesboro,Tx
Default

It depends on the stove size. it should have 1/3 the imternal Cubic inches of the oven to work properly.
__________________
I'm a Proxy Vegetarian> Cows eat grass & I eat cows.
Bludawg is offline   Reply With Quote


Old 10-21-2013, 02:13 PM   #3
jestridge
somebody shut me the fark up.
 
Join Date: 12-28-07
Location: annville ky
Default

Go for it!
jestridge is offline   Reply With Quote


Old 10-21-2013, 02:17 PM   #4
Dadeo719
is one Smokin' Farker
 
Join Date: 10-02-13
Location: Georgetown, KY
Default

Just saw it on Craigslist for 60 and was hoping.
__________________
Self-proclaimed "VILLAGE IDIOT" with 4 UDSs and a POS char-broil 24in charcoal grill.
Dadeo719 is offline   Reply With Quote


Old 10-21-2013, 02:20 PM   #5
Dadeo719
is one Smokin' Farker
 
Join Date: 10-02-13
Location: Georgetown, KY
Default

Don't know how big it is but now that you mention 1/3 size I'm doubting it for a 275
__________________
Self-proclaimed "VILLAGE IDIOT" with 4 UDSs and a POS char-broil 24in charcoal grill.
Dadeo719 is offline   Reply With Quote


Old 10-21-2013, 02:32 PM   #6
Bludawg
somebody shut me the fark up.
 
Bludawg's Avatar
 
Join Date: 07-04-09
Location: Jonesboro,Tx
Default

Quote:
Originally Posted by Dadeo719 View Post
Don't know how big it is but now that you mention 1/3 size I'm doubting it for a 275
For 60 I'd buy it you can always use it to keep the Mancave( Shop) warm or a heat source for the still house.
__________________
I'm a Proxy Vegetarian> Cows eat grass & I eat cows.
Bludawg is offline   Reply With Quote


Old 10-21-2013, 04:04 PM   #7
STCL01
Knows what a fatty is.
 
Join Date: 05-02-12
Location: Lufkin, TX
Default

Assuming that stove is cast iron, you are going to have to find a way to connect it to a carbon steel tank. I do not believe that you can just weld it. Maybe oxy rig and braise. Just something to consider.
STCL01 is offline   Reply With Quote


Old 10-21-2013, 05:21 PM   #8
J'ville Grill
is Blowin Smoke!

 
Join Date: 11-18-10
Location: USA
Default

Quote:
Originally Posted by STCL01 View Post
Assuming that stove is cast iron, you are going to have to find a way to connect it to a carbon steel tank. I do not believe that you can just weld it. Maybe oxy rig and braise. Just something to consider.
See where the exhaust pipe connects to on top of the stove? You would run that over and connect to the tank.
__________________
Rick
J'ville Grill is offline   Reply With Quote


Old 10-21-2013, 07:01 PM   #9
Teleking
is One Chatty Farker
 
Join Date: 11-10-08
Location: Maine
Default

I don't know about a 275 but I mounted a NB vertical off set the exhaust and it cooks some killer food.


Teleking is offline   Reply With Quote


Old 10-21-2013, 07:02 PM   #10
Teleking
is One Chatty Farker
 
Join Date: 11-10-08
Location: Maine
Default

Quote:
Originally Posted by STCL01 View Post
Assuming that stove is cast iron, you are going to have to find a way to connect it to a carbon steel tank. I do not believe that you can just weld it. Maybe oxy rig and braise. Just something to consider.
Drill and bolt!
Teleking is offline   Reply With Quote


Old 10-21-2013, 07:44 PM   #11
Dadeo719
is one Smokin' Farker
 
Join Date: 10-02-13
Location: Georgetown, KY
Default

Quote:
Originally Posted by Teleking View Post
I don't know about a 275 but I mounted a NB vertical off set the exhaust and it cooks some killer food.


That sir, is the most awesome thing I have seen so far today. Thank You.
__________________
Self-proclaimed "VILLAGE IDIOT" with 4 UDSs and a POS char-broil 24in charcoal grill.
Dadeo719 is offline   Reply With Quote


Old 10-21-2013, 08:29 PM   #12
CarterK
Knows what a fatty is.
 
Join Date: 08-27-12
Location: Raleigh, NC
Default

Quote:
Originally Posted by Teleking View Post
I don't know about a 275 but I mounted a NB vertical off set the exhaust and it cooks some killer food.


I believe Jules Verne wrote about that one. Truly outstanding, sir.
CarterK is offline   Reply With Quote


Old 10-21-2013, 08:37 PM   #13
Teleking
is One Chatty Farker
 
Join Date: 11-10-08
Location: Maine
Default

You might pull a 275 as this only takes a VERY small fire in the to hold 225 to 250.

Here is my other wood stove creation;)

Teleking is offline   Reply With Quote


Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Forum Custom Search: Enter your Search text below. GOOGLE will search ONLY the BBQ Brethren Forum.





All times are GMT -5. The time now is 02:06 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.
no new posts