oink
The BBQ BRETHREN FORUMS.


Our Homepage Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Brethren Banners
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, Equipment and just outdoor cookin' in general, hints, tips, tricks & techniques, success, failures... but stay on topic. And watch for that hijacking.


Reply
 
Thread Tools
Old 10-02-2013, 04:43 PM   #1
funstuie
Knows what a fatty is.

 
Join Date: 09-04-13
Location: The Bay Area, CA
Default Help with my UDS build please

Hey all,

So I am in the process of building a UDS here in the UK (right as the weather has changed to miserable and wet).

I found a drum online (eBay) and was told that although they sell lined drums I could request an unlined drum as they do have some stock.

Drum arrived a few weeks back but there was no indication on the paperwork or drum itself that its unlined. I opened the top and inside looked like its painted brown/red - is this a liner? The drum does say it used to have raspberry juice in it.

so skip to yesterday and I still don't know if this was lined (I now suspect it was/is). I drilled some vent holes and then lit a fire. I got it quite hot - burned through 4 pallets and lots of old tree wood at times it was glowing red in places.

To say I was a little disappointed today would be an understatement. The red/orange "paint" on the inside did not seem to have shifted in anyway. There was small sections where it was burnt away but not many.

So I decided to go at it with the angle grinder and some sanding discs (I used 10!). This was an absolutely horrible job. I was covered from head to toe in black dirt/dust. It's pretty much cleaned off now - I hit it with the pressure washer a few times as well through the process.

But I need to know if I should do more on the inside? Have I sufficiently removed enough? Also what I do with the inside? Do I paint it or just rub lard all over it?

sorry about the light but it's a pretty dark miserable day here:













funstuie is online now   Reply With Quote


Old 10-02-2013, 04:53 PM   #2
Fwismoker
somebody shut me the fark up.

 
Fwismoker's Avatar
 
Join Date: 08-22-13
Location: Fort Wayne, indiana
Default

Why did you use sanding discs vs using a wire brush attachment?
__________________
Hanging and Spinning Meat Appreciation Thread
http://www.bbq-brethren.com/forum/sh...d.php?t=214144

Dedicated stick burning/charcoal optional Barrel Rotisserie/Grill/Smoker Hybrid!,
Lou -Mini WSM uds style,
Jaime- Jumbo mini or Jimmy
Black bullet -newly renovated Big Poppa Black powder coated UDS,
Jaime build- http://www.bbq-brethren.com/forum/sh...d.php?t=173767
Fwismoker is online now   Reply With Quote


Old 10-02-2013, 04:55 PM   #3
warhawk_83
Knows what a fatty is.
 
Join Date: 12-31-12
Location: Hartsville,SC
Default

Don't paint the inside. From the looks of it I would season it up good and let the good times roll.
warhawk_83 is offline   Reply With Quote


Old 10-02-2013, 05:13 PM   #4
funstuie
Knows what a fatty is.

 
Join Date: 09-04-13
Location: The Bay Area, CA
Default

Quote:
Originally Posted by Fwismoker View Post
Why did you use sanding discs vs using a wire brush attachment?
I had sanding discs left over from my VW beetle rebuild and no wire brush attachments so I used what I had to hand.

The discs (the flap ones) are useless on a curved surface, the useable part of the disc just wears away almost instantly. I don't recommend them for this job
funstuie is online now   Reply With Quote


Old 10-02-2013, 05:38 PM   #5
c farmer
Babbling Farker

 
c farmer's Avatar
 
Join Date: 06-13-13
Location: pa
Default

Looks good to me.

Get building.
__________________
Adam

Gold mini wsm 1st gen mes, amazin dust and pellet smoker, and the uds.
c farmer is offline   Reply With Quote


Old 10-02-2013, 05:49 PM   #6
Bludawg
somebody shut me the fark up.
 
Bludawg's Avatar
 
Join Date: 07-04-09
Location: Jonesboro,Tx
Default

Hang some meat in that thing I'm hungry.
__________________
I never met a Cow that I didn't like with a little Salt & Pepper! Certified PORK-A-HOLIC
Bludawg is online now   Reply With Quote


Old 10-02-2013, 07:56 PM   #7
Nuco59
On the road to being a farker
 
Join Date: 08-18-13
Location: Forney, TX
Default

give it a good wash inside with hot water and laundry detergent-rinse- dry it out- get it seasoned ....rock and roll
Nuco59 is offline   Reply With Quote


Old 10-02-2013, 08:19 PM   #8
oifmarine2003
Babbling Farker

 
oifmarine2003's Avatar
 
Join Date: 11-26-12
Location: Cedarburg, WI
Default

I get those drums that had juice in them at work everyday, they have a liner. If you were in the US, I would have given you one of them for free.
__________________
Chris

I FINALLY ESCAPED THE PIT THAT IS ILLINOIS!!!!
oifmarine2003 is offline   Reply With Quote


Old 10-02-2013, 08:24 PM   #9
jeffturnerjr
is one Smokin' Farker
 
jeffturnerjr's Avatar
 
Join Date: 08-20-13
Location: Midland, TX
Default

Season with spray oil, get a fire going, do it.
__________________
Husband, Father & Pastor. UDS, offset stick burner. Cook KCBS, & Lonestar BBQ Society.
jeffturnerjr is offline   Reply With Quote


Old 10-03-2013, 02:17 AM   #10
funstuie
Knows what a fatty is.

 
Join Date: 09-04-13
Location: The Bay Area, CA
Default

Thanks guys. So I shouldn't be worried about the little bits of orange inside the drum?
funstuie is online now   Reply With Quote


Old 10-03-2013, 09:57 AM   #11
spinningwheel
On the road to being a farker
 
Join Date: 05-27-13
Location: Brunswick, Ohio
Default

I wouldn't worry any longer. Looks like you are ready to finish painting the outside and then give it a good seasoning.
__________________
The early bird may get the worm, but the second mouse gets the cheese.
spinningwheel is offline   Reply With Quote


Old 10-03-2013, 12:45 PM   #12
Lowki
Knows what a fatty is.
 
Lowki's Avatar
 
Join Date: 07-03-12
Location: Shrewsbury, MA
Default

If you had kept that fire stoked red hot for 4-5 hrs it would have burned most it off, but not all. As is it is, looks like you are good to go. If you are still worried about it, light another fire in that bad boy and burn it again, you won't have to go for nearly as long this time. Then just wash it out real good and and rinse it thoroughly. Rub it with some fat (oil, lard, etc...) and light a fire. You should be good to go. They cook great, you will love it.
__________________
Sean B., Rub This! BBQ -- Jumbo Joe, UDS, Stoker
Lowki is offline   Reply With Quote


Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Forum Custom Search: Enter your Search text below. GOOGLE will search ONLY the BBQ Brethren Forum. If it doesnt find results at first, hit search a few times more.





All times are GMT -5. The time now is 04:36 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.