Does anyone have a big green egg nest like this?

sandy1975 · 01-29-2013, 11:18 AM

I just bought a slightly used large big green egg and I have a nest that isn't the nest currently sold by big green egg. It may be an older model. The egg does not sit on the bottom of the nest. There is about 1/2 inch gap from bottom of nest and the egg and the egg wont go down any more. Should the egg be sitting on bottom of the nest? If so what should I do?

HeSmellsLikeSmoke · 01-29-2013, 02:09 PM

That is an older model BGE. The black vent has been replaced with a stainless one with a spark guard screen. It probably has the old scissor hinge instead of the newer spring hinge.

I have an old medium like that. You should be able to settle the bottom all the way down onto the nest although mine doesn't have the low cross brace between the legs, so maybe not?

deguerre · 01-29-2013, 02:38 PM

It looks pretty unstable as it is right now. Perhaps it's actually a nest for a different kamodo type?

Ron_L · 01-29-2013, 03:06 PM

The nest looks like mine, which is a few years old, but my Egg sits all the way down.

HeSmellsLikeSmoke · 01-29-2013, 03:07 PM

You could build the nest up in four places pretty easily. The egg comes with three little feet that you can set it on - same principal.

deguerre · 01-29-2013, 03:11 PM

Quote:

Originally Posted by Ron_L

The nest looks like mine, which is a few years old, but my Egg sits all the way down.

So perhaps it's out of true then and could be reshaped?

sandy1975 · 01-29-2013, 04:39 PM

Thanks everyone. I am thinking I can loosen the nest up to see if it will sit down on the bottom cross bars. If not it seems to be stable as is. Do you think I can just leave as is?

thillin · 01-29-2013, 04:50 PM

Quote:

Originally Posted by sandy1975

Thanks everyone. I am thinking I can loosen the nest up to see if it will sit down on the bottom cross bars. If not it seems to be stable as is. Do you think I can just leave as is?

Yep, loosen and the egg should drop. Then tighten

01-29-2013, 02:09 PM	#2
HeSmellsLikeSmoke somebody shut me the fark up. Join Date: 04-02-07 Location: Warren, Vermont Downloads: 0 Uploads: 0	That is an older model BGE. The black vent has been replaced with a stainless one with a spark guard screen. It probably has the old scissor hinge instead of the newer spring hinge. I have an old medium like that. You should be able to settle the bottom all the way down onto the nest although mine doesn't have the low cross brace between the legs, so maybe not? __________________ Jim - Another transplanted Texan Former KCBS CBJ Large and Medium Big Green Eggs , Black 18.5" WSM, Blue Weber Performer - Stainless, Green Weber OTG Kettle , Brinkmann SnP Pro, and a Stainless UDS. One retired Portable Kitchen grill. Red Thermapen, Maverick ET-73, EdgePro Apex Sharpener. Avatar is the original 1951 Weber Kettle

01-29-2013, 02:38 PM	#3
deguerre somebody shut me the fark up. Join Date: 07-15-09 Location: Memphis, TN...Formerly of Decatur, AL Downloads: 0 Uploads: 0	It looks pretty unstable as it is right now. Perhaps it's actually a nest for a different kamodo type? __________________ Guerry >^..^< Weber 22 1/2" OTS "Dirty Girl", Weber Performer/Cajun Bandit "Cajun Queen", GOSM "Bubba Q", Maverick et73, RED Thermapen, One Cameron Stove Top "Lazy Girl".It burns sawdust... Avatar by Northwest BBQ!!! If you really care about this place, you'll show some respect for it. Seven Zero notches on my spatula. Join_Us_In_The_Throwdowns_Forum!

01-29-2013, 03:06 PM	#4
Ron_L Moderator Join Date: 12-09-04 Location: Chicago 'Burbs Downloads: 0 Uploads: 0	The nest looks like mine, which is a few years old, but my Egg sits all the way down. __________________ "Ron Rico, Boss. You can call me Captain Ron..." Save The Fatty! FEC-100/BWS Party/Memphis Pro SS/PBC/LBGE X 2/SBGE/Mini BGE/Nomad Pellet-matic/Good-One Model 42/WSM X 2/Cookshack Smokette 008/Weber Performer/Weber Gasser/Weber Kettle X 2/Weber Smokey Joe/WGA/UDS/Coffee Roasting Gasser and a pickle Remembering a friend

01-29-2013, 03:07 PM	#5
HeSmellsLikeSmoke somebody shut me the fark up. Join Date: 04-02-07 Location: Warren, Vermont Downloads: 0 Uploads: 0	You could build the nest up in four places pretty easily. The egg comes with three little feet that you can set it on - same principal. __________________ Jim - Another transplanted Texan Former KCBS CBJ Large and Medium Big Green Eggs , Black 18.5" WSM, Blue Weber Performer - Stainless, Green Weber OTG Kettle , Brinkmann SnP Pro, and a Stainless UDS. One retired Portable Kitchen grill. Red Thermapen, Maverick ET-73, EdgePro Apex Sharpener. Avatar is the original 1951 Weber Kettle

01-29-2013, 04:39 PM	#7
sandy1975 Knows what a fatty is. Join Date: 04-29-12 Location: akron Downloads: 0 Uploads: 0	Thanks everyone. I am thinking I can loosen the nest up to see if it will sit down on the bottom cross bars. If not it seems to be stable as is. Do you think I can just leave as is?