New uds build question

BigTone · 01-26-2013, 06:16 AM

Hey folks, Just found the site and I'm loving it already. I am planning on building a uds smoker soon and it looks rather straight forward. I have seen some people add a piece of pipe with a valve to one of the four bottom vent holes so they did not have to bend over to adjust the air intake. I have a bad back so i love this idea, does it work efficiently? Any help and advice is greatly appreciated and I look forward to talking with you all !!!

~Anthony

foam2 · 01-26-2013, 07:07 AM

I tried the pipe with two elbows and then a ball valve but I found it added a lot of restriction when trying to cook at higher temps. I have since removed it.

Flat_Rate · 01-26-2013, 07:11 AM

Quote:

Originally Posted by foam2

I tried the pipe with two elbows and then a ball valve but I found it added a lot of restriction when trying to cook at higher temps. I have since removed it.

I had the same issue, I removed mine, it's not like you have to adjust a uds all the time anyway, set once and it's good for all day.

Kloogee · 01-26-2013, 07:14 AM

I have never tried the riser pipe, so I can't comment on that. But I end up using my foot to adjust the valve on mine, so it really hasn't been necessary for me. Good luck with your build. Make sure to post pics of it.

jrn · 01-26-2013, 11:01 AM

Quote:

Originally Posted by Kloogee

I have never tried the riser pipe, so I can't comment on that. But I end up using my foot to adjust the valve on mine, so it really hasn't been necessary for me. Good luck with your build. Make sure to post pics of it.

Yeah that's what I do too. Use the toe of my boot.

Bigtone - there's also another popular option. Instead of running a pipe up the barrel, you can instead attach a rod to the valve. Run the rod up the barrel. Then attach the valve handle to the top of the rod. Search "redneck uds".

Swamp Donkeyz BBQ · 01-26-2013, 11:17 AM

I only put the pipe and elbow on one inlet. The other two I close using my hook for the coal basket. I use the extended inlet for fine tuning once I'm up to temp. Works fine for me.
ImageUploadedByTapatalk 21359220636.221319.jpg

jrn · 01-26-2013, 11:17 AM

"If a redneck wanted to build a uds". Page 4 has a good pic of what I'm talking about.

Swamp Donkeyz BBQ · 01-26-2013, 11:18 AM

Not sure why the pic showed up sideways.

BigTone · 01-26-2013, 12:22 PM

sounds like I should skip the pipe, I was afraid I was going to have to keep playing with the valve all day but it sounds like once its set it holds temp so the valve w/o the pipe will be fine. I will post pictures when its done, its like -10 here in upstate NY so im going to wait until it warms up a little. thanks for the help, ~Anthony

Kenbo · 01-26-2013, 01:01 PM

You could try over sizing the pipe. I did a 3/4"x1" street elbow to 1"x6" riser pipe and topped it with a 1" valve. I can adjust the handle with my foot and still see the valve to gauge how much adjustment I'm giving it. I have no issues getting well above 300deg.

Also, this time of year is the reason we moved from the Hyde Park area. It was 80 here in Austin yesterday! Grilled chicken yesterday... in shorts.

Pappy · 01-26-2013, 01:05 PM

Put an extention on the valve handle, so you don't have to bend over to adjust. No extension pipe.

Bludawg · 01-26-2013, 03:11 PM

When I first built mine I cooked on it for a year then I add the Fat man mod to be honest IMO it cooks better with it.

01-26-2013, 06:16 AM	#1
BigTone Is lookin for wood to cook with. Join Date: 01-25-13 Location: Salem, NY Downloads: 0 Uploads: 0	New uds build question Hey folks, Just found the site and I'm loving it already. I am planning on building a uds smoker soon and it looks rather straight forward. I have seen some people add a piece of pipe with a valve to one of the four bottom vent holes so they did not have to bend over to adjust the air intake. I have a bad back so i love this idea, does it work efficiently? Any help and advice is greatly appreciated and I look forward to talking with you all !!! ~Anthony

01-26-2013, 11:17 AM	#7
jrn Full Fledged Farker Join Date: 07-30-12 Location: Quitman, Ms Downloads: 0 Uploads: 0	"If a redneck wanted to build a uds". Page 4 has a good pic of what I'm talking about. __________________ UDS, mini wsm

01-26-2013, 01:01 PM	#10
Kenbo Found some matches. Join Date: 12-05-12 Location: Round Rock, TX Downloads: 0 Uploads: 0	You could try over sizing the pipe. I did a 3/4"x1" street elbow to 1"x6" riser pipe and topped it with a 1" valve. I can adjust the handle with my foot and still see the valve to gauge how much adjustment I'm giving it. I have no issues getting well above 300deg. Also, this time of year is the reason we moved from the Hyde Park area. It was 80 here in Austin yesterday! Grilled chicken yesterday... in shorts. __________________ Ken: UDS - new/learning; New Braunfels - offset with a few mods; Char-Broil gasser

01-26-2013, 01:05 PM	#11
Pappy is One Chatty Farker Join Date: 05-09-11 Location: Granite City, Illinois (Near St. Louis "GO CARDS") Downloads: 0 Uploads: 0	Put an extention on the valve handle, so you don't have to bend over to adjust. No extension pipe. __________________ Performer, UDS, 1983 WSM, Frank-in-Weber, 120 Gallon Offset, IQ-110, ET-732

01-26-2013, 03:11 PM	#12
Bludawg Babbling Farker Join Date: 07-04-09 Location: Jonesboro,Tx Downloads: 0 Uploads: 0	When I first built mine I cooked on it for a year then I add the Fat man mod to be honest IMO it cooks better with it. __________________ I never met a Cow that I didn't like with a little Salt & Pepper! Certified PORK-A-HOLIC

01-26-2013, 07:07 AM	#2
foam2 Knows what a fatty is. Join Date: 12-02-11 Location: chicago, illinois Downloads: 0 Uploads: 0	I tried the pipe with two elbows and then a ball valve but I found it added a lot of restriction when trying to cook at higher temps. I have since removed it.

01-26-2013, 07:14 AM	#4
Kloogee On the road to being a farker Join Date: 09-05-12 Location: Midwest Downloads: 0 Uploads: 0	I have never tried the riser pipe, so I can't comment on that. But I end up using my foot to adjust the valve on mine, so it really hasn't been necessary for me. Good luck with your build. Make sure to post pics of it.

01-26-2013, 11:17 AM	#6
Swamp Donkeyz BBQ Take a breath! Join Date: 07-25-12 Location: Huntsville, Tx Downloads: 0 Uploads: 0	I only put the pipe and elbow on one inlet. The other two I close using my hook for the coal basket. I use the extended inlet for fine tuning once I'm up to temp. Works fine for me. ImageUploadedByTapatalk 21359220636.221319.jpg

01-26-2013, 11:18 AM	#8
Swamp Donkeyz BBQ Take a breath! Join Date: 07-25-12 Location: Huntsville, Tx Downloads: 0 Uploads: 0	Not sure why the pic showed up sideways.

01-26-2013, 12:22 PM	#9
BigTone Is lookin for wood to cook with. Join Date: 01-25-13 Location: Salem, NY Downloads: 0 Uploads: 0	sounds like I should skip the pipe, I was afraid I was going to have to keep playing with the valve all day but it sounds like once its set it holds temp so the valve w/o the pipe will be fine. I will post pictures when its done, its like -10 here in upstate NY so im going to wait until it warms up a little. thanks for the help, ~Anthony