Our Homepage Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Brethren Banners(temp offline)
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk


Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, Equipment and just outdoor cookin' in general, hints, tips, tricks & techniques, success, failures... but stay on topic. And watch for that hijacking.

Thread Tools
Old 01-22-2013, 05:48 PM   #1
Is lookin for wood to cook with.
Join Date: 10-16-12
Location: Seattle, WA
Default All day smoke (pics)

OK, so over the weekend I had the smoker running all day and did a brisket, ribs, and salmon. I have some pics below and would appreciate it any advice. This was the first brisket I did, so I kept the temp around 250 in my BWS Chubby. I used two larger pieces of hickory (pic 1 for placement before I covered with briquets).


When I tested the temp at 4 hours it was around 175 depending on the place. So I took it out and wrapped it in foil. Seemed like it was cooking a little fast. It was 7.5 pounds. USDA Choice from Costco.


I pulled it at about 7 hours when the temp hit 200 and I let it rest for 30min still wrapped.



It was OK. I'd say it was smoky and tender in places, but overall not as moist and tender as a good one should be. I used briquets and the water pan always had water. I added some briquets during the smoke, unlit on top. Others have said this is fine, but the briquets smoke a bit when they light up, does that affect the meat?

I also started the ribs in the smoker and I did a 3-2-1. Cut the ribs in half to fit in the chubby. I also kept it at 250 degrees. I used apple wood...the hickory was done from earlier.


photo 1.jpg

Again, these were tender. Seems like 6 hours was a lot and I'd appreciate any recipes you'd recommend. I just did basic salt, pepper, garlic and onion powder. When I wrapped I added apple cider. And then for the last hour I just brushed on honey mixed with apple vinegar and some pepper.

Was a fun day having the smoker running all day. Also curious about when folks put on more briquets during the smoke. Seems like you don't want to add them too often or soon, but you want enough of the first batches' remnants to ignite them.

Oh and here's a shot of the salmon. I followed someone's "Easter Smoked Salmon" recipe on this board. Soaked in rum, then a 4 hour salt cure. Very good.

photo 2.jpg
>> BWS Chubby, DigiQ DX2, more to come...
OrleansAg is offline   Reply With Quote

Old 01-22-2013, 06:16 PM   #2
is one Smokin' Farker

JohnHB's Avatar
Join Date: 12-14-12
Location: Sydney NSW

The brisket looks a little over cooked. I'd aim for maybe 15 degrees less next time but overall the three products look like a fantastic job.
When you stop horsing around it is time to fire up the BBQ & Smoker
JohnHB is offline   Reply With Quote

Old 01-22-2013, 06:21 PM   #3
Babbling Farker
WineMaster's Avatar
Join Date: 01-16-07
Location: Southern MN

I would try to slice against the grain. Gives a better texture.

MJH From Backyard Bomber BBQ -- Junior
YS 640 Comp
22.5 Weber Kettle
Blue Thermopen

Comp Team
Wine & Swine
WineMaster is offline   Reply With Quote

Thanks from:--->
Old 01-22-2013, 06:30 PM   #4
is one Smokin' Farker
Join Date: 05-05-11
Location: Circleville, OH

Looks good as said above brisky a tad over done but over all a good job
Custom 250 gal drum cooker,Weber OTG,Maverick ET-73,Covert Black Thermapen
Militant83 is offline   Reply With Quote

Thanks from:--->
Old 01-22-2013, 06:39 PM   #5
Pitmaster T
Babbling Farker
Pitmaster T's Avatar
Join Date: 04-03-11
Location: Texas

How anyone can tell a if a brisket is overdone based on pictures of a brisket incorrectly sliced is blowing smoke up your ass.

Unless its me.

I think you may have nailed it. Keep up the good work.

In addition. NEVER take doneness advice from anyone who dictates doneness by Internal temp. Especially considering the infamous margin of error on ANY brisket.

If you MUST use temp as a factor (or guide to when to poke) dial back or forward 5 degrees at a time. Of course, this is not a good idea because there are choice briskets done at 178 and choice briskets done at 205 with identical "feels" and baby, that's a HUGE margin of error.

One way to find the right feel is the Night Train Brisket.

Certified KCBS Judge
Pitmaster T is offline   Reply With Quote

Thanks from: --->
Old 01-22-2013, 07:05 PM   #6
Is lookin for wood to cook with.
Join Date: 10-16-12
Location: Seattle, WA

Thanks guys.

One other question. I haven't put the meat I'm smoking in a pan, I just let the drippings hit the water pan. I try to keep the pan from going dry, but do you guys recommend using a pan instead?
>> BWS Chubby, DigiQ DX2, more to come...
OrleansAg is offline   Reply With Quote

Old 01-22-2013, 07:24 PM   #7
is One Chatty Farker
Join Date: 09-13-12
Location: canada

Putting it in a pan just saves a mess on the grills if i can fit a pan and not block air flow, i do. I dont like my grills all yucky
Backwoods party,22.5 wsm,18.5 wsm,14.5 wsm, smokey joe, performer,22.5 kettle.
grantw is offline   Reply With Quote


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Forum Custom Search: Enter your Search text below. GOOGLE will search ONLY the BBQ Brethren Forum.

All times are GMT -5. The time now is 11:21 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.
no new posts