Butchers Gloves - Anyone use them?

sdbbq1234 · 01-17-2013, 07:14 PM

Title says it all.

Anyone use butchers gloves such as these?

Stainless Steel Mesh Hand Glove - Cut Resistant (L) - Amazon.com

The older I get, the more I slash my fingers!

Thank!

wallace

bo_gator · 01-17-2013, 07:29 PM

I use one when I am slicing with my mandolin/V-slicer, it is much easier than trying to go fast with the clunky hand guard

HankB · 01-17-2013, 07:44 PM

That's pretty spendy, but I'm not seeing finger tips on CL at any price.

If you make a clean cut, a good surgeon could probably sew it back on, but that's going to cost a awful lot more than the glove.

luke duke · 01-17-2013, 08:03 PM

Seems more cost effective
http://www.amazon.com/BladeX5-Classi...oves-Approved/

Smokin' D · 01-17-2013, 08:04 PM

I've got one. Made the wife pretty happy when I got it too. She was always concerned about the potential cuts. A black nitrile glove underneath works well and looks good too!

sdbbq1234 · 01-17-2013, 08:20 PM

Quote:

Originally Posted by luke duke

Seems more cost effective
http://www.amazon.com/BladeX5-Classi...oves-Approved/

Hhhm, link don't work.

wallace

realspaazz · 01-17-2013, 08:22 PM

I used to use one when I worked for a butcher. The stainless steel should last a home user for a few generations. The Kevlar ones are far more comfortable, but you can cut through them eventually.

Hoss · 01-17-2013, 09:21 PM

Check this out.

http://www.ebay.com/itm/NEW-BladeX5-...-/230733131603

tish · 01-17-2013, 09:46 PM

Do you still have fairly decent manual dexterity wearing one of these gloves?

Hoss · 01-17-2013, 10:17 PM

Yes,yes I do.

Chef Country · 01-17-2013, 10:51 PM

I have used them before cutting up deer, almost needed a pair today but stopped as the knife hit my finger nail when the meat rolled over on me

timzcardz · 01-18-2013, 07:04 AM

Quote:

Originally Posted by sdbbq1234

Title says it all.

Anyone use butchers gloves such as these?

I had one of those years ago when I had a boat and did a lot of fishing. Took the worry out of fileting fish on a bouncing boat. It was great.

I can say that I spent no where near that price though, but then it was almost 30 years ago.

Quote:

Originally Posted by Hoss

Check this out.

http://www.ebay.com/itm/NEW-BladeX5-...-/230733131603

These look like the gloves my mother just got me for Christmas. I haven't used them yet though.

BAD324 · 01-18-2013, 08:04 AM

My Dad has several pairs from all the fishing he does so I actually just use a pair of his from time to time that he gave me. I like them, especially when I've had a few too many delicious craft brews while smoking up the meats

NickTheGreat · 01-18-2013, 08:16 AM

I've also used them for fishing and work well.

luke duke · 01-18-2013, 11:06 AM

Quote:

Originally Posted by luke duke

Seems more cost effective
http://www.amazon.com/BladeX5-Classi...oves-Approved/

Sorry for the bad link. This one should work:

Amazon.com: BladeX5 57100 Classic Cut & Slash Resistant Gloves Cut Resistant Level 5 EN388 CE Approved, grey, Large: Home Improvement

01-17-2013, 07:29 PM	#2
bo_gator On the road to being a farker Join Date: 06-11-12 Location: Waynesville, NC Downloads: 0 Uploads: 0	I use one when I am slicing with my mandolin/V-slicer, it is much easier than trying to go fast with the clunky hand guard __________________ Webber 18 1/2" WSM, Webber 22 1/2" WSM, Webber 22 1/2" OTG Kettle, Teal Thermapen You mean Sriricha isn't one of the four basic food groups

01-17-2013, 07:44 PM	#3
HankB is one Smokin' Farker Join Date: 01-16-12 Location: Winfield, IL Downloads: 0 Uploads: 0	That's pretty spendy, but I'm not seeing finger tips on CL at any price. If you make a clean cut, a good surgeon could probably sew it back on, but that's going to cost a awful lot more than the glove. __________________ Weber Crazy

01-17-2013, 08:22 PM	#7
realspaazz Full Fledged Farker Join Date: 08-21-10 Location: Lake Worth, Florida Downloads: 0 Uploads: 0	I used to use one when I worked for a butcher. The stainless steel should last a home user for a few generations. The Kevlar ones are far more comfortable, but you can cut through them eventually. __________________ 18.5 WSM, Green Weber Genesis320, Cast iron firepit(w/grill), and a Copper Weber 22" OTS

01-17-2013, 09:46 PM	#9
tish Babbling Farker Join Date: 11-13-11 Location: york, pa Downloads: 0 Uploads: 0	Do you still have fairly decent manual dexterity wearing one of these gloves? __________________ When all else fails, just ask yourself WWGALD???* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Just a little pyro at heart! Who's got the hot dogs? Bubba Keg, Weber Genesis E-310 NG Mini WSM, Shhh!!! Michael's surprise <'\__! .// .\\ Puppy baby says 'piss on it and walk away!' ~~~~~~~~~~~~~~~~~~ Proud recipient of a certifiably uncertified limited edition MOINK ball certificate!!

01-17-2013, 10:51 PM	#11
Chef Country is one Smokin' Farker Join Date: 07-26-09 Location: Wellington, KS Downloads: 0 Uploads: 0	I have used them before cutting up deer, almost needed a pair today but stopped as the knife hit my finger nail when the meat rolled over on me __________________ Country Q Here for a Good Time, not a Long Time!Webber 22.5 OTS The fastest and most accurate splash proof Red Thermapen UDS that gets used more than traeger Shop built 300 gal smoker Traeger bbq 125 with digital 180 controller collecting parts for a 500gal reverse flow build

01-17-2013, 08:03 PM	#4
luke duke is one Smokin' Farker Join Date: 01-16-10 Location: Dallas, TX Downloads: 0 Uploads: 0	Seems more cost effective http://www.amazon.com/BladeX5-Classi...oves-Approved/

01-17-2013, 08:04 PM	#5
Smokin' D is One Chatty Farker Join Date: 12-11-07 Location: N. Andover, MA Downloads: 0 Uploads: 0	I've got one. Made the wife pretty happy when I got it too. She was always concerned about the potential cuts. A black nitrile glove underneath works well and looks good too!

01-17-2013, 09:21 PM	#8
Hoss is One Chatty Farker Join Date: 12-31-09 Location: Hernando,MS Downloads: 0 Uploads: 0	Check this out. http://www.ebay.com/itm/NEW-BladeX5-...-/230733131603

01-17-2013, 10:17 PM	#10
Hoss is One Chatty Farker Join Date: 12-31-09 Location: Hernando,MS Downloads: 0 Uploads: 0	Yes,yes I do.

01-18-2013, 08:04 AM	#13
BAD324 Got Wood. Join Date: 12-13-12 Location: Cleveland, OH Downloads: 0 Uploads: 0	My Dad has several pairs from all the fishing he does so I actually just use a pair of his from time to time that he gave me. I like them, especially when I've had a few too many delicious craft brews while smoking up the meats

01-18-2013, 08:16 AM	#14
NickTheGreat is one Smokin' Farker Join Date: 05-08-12 Location: Iowa Downloads: 0 Uploads: 0	I've also used them for fishing and work well. __________________ 18.5" WSM ; Weber E-330 ; Weber Q200 (tailgating) . . . Guess I'm a Weber fanboy!