The BBQ BRETHREN FORUMS.


Forum Portal Recipes Smoke Signals Magazine Welocme Merchandise Associations Purchase Subscription Brethren Banners
Go Back   The BBQ BRETHREN FORUMS. > Discussion Area > Q-talk

Notices

Q-talk *ON TOPIC ONLY* QUALITY ON TOPIC discussion of Backyard BBQ, grilling, Equipment and just outdoor cookin' in general, hints, tips, tricks & techniques, success, failures... but stay on topic. And watch for that hijacking.


Reply
Thread Tools
Unread 01-10-2013, 01:06 PM   #1
grilling24x7
Full Fledged Farker
 
Join Date: 05-17-11
Location: Baltimore, Maryland
Downloads: 0
Uploads: 0
Cool UDS - Exhaust - 8 small holes vs smoke stack

Ok,
I'm driving myself crazy deciding on exhaust for my up and coming UDS.

I have a flat lid with no 2 inch bung hole. It's just flat.

Choice 1 - drill 8 1/2" holes evenly spaced around the flat lid. KISS
(pros - don't have to buy anything else, supposed lack of 'cold spots'; cons - I have to use foil or marbles to put out the fire (I'm not doing 8 nipples on top))

Choice 2 - Drill a 2" hole and then find a smoke stack.
(pros - awesome looking; cons - I'll have to buy a 2" hole saw and somehow have to figure out what to use as an exhaust pipe).

What do you guys think? Last night I spent hours reading through the UDS threads and using the search feature below and basically I learned that I'm thinking about this too much! :-)

However, I'd hate to have temperature control issues b/c of my exhaust choice.

Thanks!
__________________
[FONT=Arial][SIZE=3][COLOR=navy]Weber Performer[/COLOR][/SIZE][/FONT]
[FONT=Arial][SIZE=3][COLOR=navy]18.5" WSM[/COLOR][/SIZE][/FONT]
[FONT=Arial][SIZE=3][COLOR=navy][B]UDS build[/B]: [/COLOR][/SIZE][/FONT][URL="http://grilling24x7.com/UDS1.shtml"][FONT=Arial][SIZE=3][COLOR=navy]http://grilling24x7.com/UDS1.shtml[/COLOR][/SIZE][/FONT][/URL]
[URL="http://www.grilling24x7.com/"][FONT=Arial][SIZE=3][COLOR=navy]http://www.grilling24x7.com[/COLOR][/SIZE][/FONT][/URL]
grilling24x7 is offline   Reply With Quote


Unread 01-10-2013, 01:16 PM   #2
Foxfire
Full Fledged Farker

 
Join Date: 08-28-12
Location: San Jose, CA
Downloads: 0
Uploads: 0
Default

I wonder if you could get a pair of daisy wheels from Weber on their replacement parts website. Install with spring screws over eight half inch holes. Your exhast would be spaced out if you put them across from each other and you could easily shut them down, no nipples to hand close.

EDIT: Big Poppa Smokers UDS kit is currently out of stock, but when they get parts back in you can order daisy wheels from them as well. I believe their version uses eight 3/4 inch holes.
__________________
~ [I]Scott[/I] ~
[COLOR="Blue"]Blue [/COLOR]Weber Performer + Craycort CI • [COLOR="red"]Brick Red[/COLOR] Weber One-Touch Platinum • Weber 26.75 Kettle • Akorn Kamado • ET 732 • Record-crushing [COLOR="Orange"][B]ORANGE[/B][/COLOR] Thermapen • UDS In Progress
Foxfire is offline   Reply With Quote


Unread 01-10-2013, 01:25 PM   #3
yakdung
is one Smokin' Farker
 
Join Date: 04-12-10
Location: Houston, Texas
Downloads: 0
Uploads: 0
Thumbs up

I believe it really doesn't matter. Use this gentleman as your guide:

Jay Vantuyl aka "The Snail"
http://books.google.com/books?id=h_r...0snail&f=false

Last edited by yakdung; 01-10-2013 at 01:53 PM..
yakdung is offline   Reply With Quote


Thanks from:--->
Unread 01-10-2013, 01:31 PM   #4
jrn
Full Fledged Farker
 
Join Date: 07-30-12
Location: Quitman, Ms
Downloads: 0
Uploads: 0
Default

Choice 3- Weber lid!
__________________
UDS, mini wsm, 22.5" weber kettle
jrn is offline   Reply With Quote


Thanks from:--->
Unread 01-10-2013, 01:34 PM   #5
grilling24x7
Full Fledged Farker
 
Join Date: 05-17-11
Location: Baltimore, Maryland
Downloads: 0
Uploads: 0
Default

or maybe even 4 1" holes. Even less drilling.

I agree, the Weber damper/daisy wheel would cover them wouldn't it.
__________________
[FONT=Arial][SIZE=3][COLOR=navy]Weber Performer[/COLOR][/SIZE][/FONT]
[FONT=Arial][SIZE=3][COLOR=navy]18.5" WSM[/COLOR][/SIZE][/FONT]
[FONT=Arial][SIZE=3][COLOR=navy][B]UDS build[/B]: [/COLOR][/SIZE][/FONT][URL="http://grilling24x7.com/UDS1.shtml"][FONT=Arial][SIZE=3][COLOR=navy]http://grilling24x7.com/UDS1.shtml[/COLOR][/SIZE][/FONT][/URL]
[URL="http://www.grilling24x7.com/"][FONT=Arial][SIZE=3][COLOR=navy]http://www.grilling24x7.com[/COLOR][/SIZE][/FONT][/URL]
grilling24x7 is offline   Reply With Quote


Unread 01-10-2013, 01:35 PM   #6
grilling24x7
Full Fledged Farker
 
Join Date: 05-17-11
Location: Baltimore, Maryland
Downloads: 0
Uploads: 0
Default

Quote:
Originally Posted by jrn View Post
Choice 3- Weber lid!
True,
But I'm not there yet. I don't have an extra lid and I don't even have the drum yet so I'm not certain if the 22.5 inch dome will fit snug.

That's down the road for sure.
__________________
[FONT=Arial][SIZE=3][COLOR=navy]Weber Performer[/COLOR][/SIZE][/FONT]
[FONT=Arial][SIZE=3][COLOR=navy]18.5" WSM[/COLOR][/SIZE][/FONT]
[FONT=Arial][SIZE=3][COLOR=navy][B]UDS build[/B]: [/COLOR][/SIZE][/FONT][URL="http://grilling24x7.com/UDS1.shtml"][FONT=Arial][SIZE=3][COLOR=navy]http://grilling24x7.com/UDS1.shtml[/COLOR][/SIZE][/FONT][/URL]
[URL="http://www.grilling24x7.com/"][FONT=Arial][SIZE=3][COLOR=navy]http://www.grilling24x7.com[/COLOR][/SIZE][/FONT][/URL]
grilling24x7 is offline   Reply With Quote


Unread 01-10-2013, 01:44 PM   #7
SmokerKing
is one Smokin' Farker
 
SmokerKing's Avatar
 
Join Date: 09-07-10
Location: Sunny AZ
Downloads: 0
Uploads: 0
Default

I don't think a 2" dimater stack is big enough.

I use 3 1/2" stacks and they were great, always open, no back up.
SmokerKing is offline   Reply With Quote


Thanks from:--->
Unread 01-10-2013, 02:30 PM   #8
JS-TX
is One Chatty Farker
 
Join Date: 02-17-10
Location: San Antonio, TX
Downloads: 0
Uploads: 0
Default

The lid that comes w/your drum may/should have a 2" bung that screws in/out.
JS-TX is online now   Reply With Quote


Unread 01-10-2013, 02:35 PM   #9
HeSmellsLikeSmoke
somebody shut me the fark up.
 
HeSmellsLikeSmoke's Avatar
 
Join Date: 04-02-07
Location: Warren, Vermont
Downloads: 0
Uploads: 0
Default

Some drums fit a kettle lit perfectly. If you don't have a 22.5" drum, borrow a lid from someone you know an take it with you when you look for a drum. If you decide to use a kettle lid in the future, it will be very easy.
__________________
Jim - Another transplanted Texan
Former KCBS CBJ

Large and Medium Big Green Eggs , Black 18.5" WSM, Blue Weber Performer - Stainless, Green Weber OTG Kettle , Brinkmann SnP Pro, and a Stainless UDS. One retired Portable Kitchen grill.

Red Thermapen, Maverick ET-732, EdgePro Apex Sharpener.

Avatar is the original 1951 Weber Kettle

Last edited by HeSmellsLikeSmoke; 01-10-2013 at 03:14 PM..
HeSmellsLikeSmoke is offline   Reply With Quote


Unread 01-10-2013, 02:37 PM   #10
LT72884
Babbling Farker
 
LT72884's Avatar
 
Join Date: 05-07-09
Location: Draper Utah
Downloads: 0
Uploads: 0
Default

wish i had 8 nipples on top.... i would be soooo damn popular.. err with my smoker i mean.

EDIT.. personally, i would go with the stack. i am in the transition of going from 8 1/2 inch holes to a stack because in winter or rain, it leaks around the holes. easier to cover a stack.
__________________
http://grillofmydreams.blogspot.com http://thebreadjournal.blogspot.com
LT72884 is offline   Reply With Quote


Unread 01-10-2013, 04:58 PM   #11
grilling24x7
Full Fledged Farker
 
Join Date: 05-17-11
Location: Baltimore, Maryland
Downloads: 0
Uploads: 0
Default

I have one drum option. It's the best price/proximity for me. It's unlined and new so I'm doing it. The lid as I said is flat, no bung.

I don't want to use my kettle lid in it because of how nasty smoking makes the lid. I used to smoke in my 22 in kettle. Nasty. Down the road if I can find a Craigslist lid sure but now I'm focused on the flat lid.

So it looks like 2 votes for a stack so far.
__________________
[FONT=Arial][SIZE=3][COLOR=navy]Weber Performer[/COLOR][/SIZE][/FONT]
[FONT=Arial][SIZE=3][COLOR=navy]18.5" WSM[/COLOR][/SIZE][/FONT]
[FONT=Arial][SIZE=3][COLOR=navy][B]UDS build[/B]: [/COLOR][/SIZE][/FONT][URL="http://grilling24x7.com/UDS1.shtml"][FONT=Arial][SIZE=3][COLOR=navy]http://grilling24x7.com/UDS1.shtml[/COLOR][/SIZE][/FONT][/URL]
[URL="http://www.grilling24x7.com/"][FONT=Arial][SIZE=3][COLOR=navy]http://www.grilling24x7.com[/COLOR][/SIZE][/FONT][/URL]
grilling24x7 is offline   Reply With Quote


Unread 01-10-2013, 07:33 PM   #12
bo_b_q
Knows what a fatty is.

 
Join Date: 09-28-12
Location: Northern IN
Downloads: 0
Uploads: 0
Default

I'd vote for using a Weber daisy wheel. It's obviously works well, as a lot of people use the Weber lids on their drums. You have the ability to seal it up at the end of a cook, won't need to buy a hole saw. You may still need a bit (not sure of your tool situation)...but if you get a step bit for the intakes, you could get one that would work for exhaust as well. I think the Weber holes around roughly 3/4"...not sure what your plan is for the intakes, but you could keep it simple and go 3/4" both in and out.

Just my $.02!
__________________
-Bo

Golden Dome UDS "[URL=http://www.bbq-brethren.com/forum/showthread.php?t=149301]Dorthy[/URL]" | ~22" Char-broil "[COLOR="Green"]Char-lene[/COLOR]" | iGrill | Supersonic [COLOR="Blue"]Blue [/COLOR]Thermapen
Where there is love there is barbecue. – Gandhi
bo_b_q is offline   Reply With Quote


Unread 01-10-2013, 07:46 PM   #13
jeffjenkins1
Babbling Farker

 
jeffjenkins1's Avatar
 
Join Date: 03-01-08
Location: Akron, OH
Downloads: 0
Uploads: 0
Default

I use a Weber lid and the flat lid with 6 - 3/4" holes. The flat lid has no hot spots and the Weber lid has one near the exhaust.

Jeff
__________________
You do what you have to do, so you can do what you want to do!
Ole Hickory Ultra Que 2
18" WSM
18" Weber OTS
Primo Oval XL
NB American Gourmet offset smoker
UDS
Big Chief Smoker
Turkey Fryer
jeffjenkins1 is offline   Reply With Quote


Unread 01-10-2013, 07:57 PM   #14
cowgirl
somebody shut me the fark up.

 
cowgirl's Avatar
 
Join Date: 07-18-07
Location: Oklahoma
Downloads: 0
Uploads: 0
Default

I went with 8 holes. I like to think the heat/smoke rises and exits the drum evenly.

Not really sure if it makes that much difference but I'm happy with it.












__________________
jeanie
sittin' by the campfire with my Brethren friends.
Lifetime member of the Society for the Preservation of Authentic Royal Magical Rare Kaskaskian Peppers (Thanks Ash :))

http://cowgirlscountry.blogspot.com/
cowgirl is offline   Reply With Quote


Thanks from: --->
Unread 01-10-2013, 08:19 PM   #15
grilling24x7
Full Fledged Farker
 
Join Date: 05-17-11
Location: Baltimore, Maryland
Downloads: 0
Uploads: 0
Default

Bo - agreed. The daisy wheel does seem pretty cool. Especially if it was painted like the lid. Could like nice, too.

Jeanie, your 8 holes are each 1/2"? You cook with all of them open I assume?

Jeff - I like to the 6 3/4" idea. Less drilling than 8 1/2"! I could probably get away with 4 of them and have similar area as 8 holes.

Thanks everyone!

comments are STILL appreciated! :=)
__________________
[FONT=Arial][SIZE=3][COLOR=navy]Weber Performer[/COLOR][/SIZE][/FONT]
[FONT=Arial][SIZE=3][COLOR=navy]18.5" WSM[/COLOR][/SIZE][/FONT]
[FONT=Arial][SIZE=3][COLOR=navy][B]UDS build[/B]: [/COLOR][/SIZE][/FONT][URL="http://grilling24x7.com/UDS1.shtml"][FONT=Arial][SIZE=3][COLOR=navy]http://grilling24x7.com/UDS1.shtml[/COLOR][/SIZE][/FONT][/URL]
[URL="http://www.grilling24x7.com/"][FONT=Arial][SIZE=3][COLOR=navy]http://www.grilling24x7.com[/COLOR][/SIZE][/FONT][/URL]
grilling24x7 is offline   Reply With Quote


Thanks from:--->
Reply

Tags
exhaust, uds

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Loading



All times are GMT -5. The time now is 11:56 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
vBulletin Optimisation provided by vB Optimise v2.6.0 Beta 4 (Lite) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
2003 -2012 © BBQ-Brethren Inc. All rights reserved. All Content and Flaming Pig Logo are registered and protected under U.S and International Copyright and Trademarks. Content Within this Website Is Property of BBQ Brethren Inc. Reproduction or alteration is strictly prohibited.
no new posts