Easiest UDS Drum to use for a build?

grilling24x7 · 01-05-2013, 09:54 PM

So I've read the redneck UDS thread and skimmed through the big 500 page one. I'm reading all this stuff about linings in the 55 gallon drum and how hard it is to scrub off.

I'm aware that a good burn out is needed on any drum you are going to use as a UDS but which type doesn't require too much scrubbing and painful cleaning? I read some guys saying the "red liner" is a no-no but others say that liner comes right off.

I'm a bit confused. I don't mind buying a new drum even though I see that some guys are getting them for free, but...

What's the easiest type of 55 gallon drum to use in terms of that initial clean/burn out?

Thanks!

John

HeSmellsLikeSmoke · 01-05-2013, 09:58 PM

Unlined, unused, open top drum.

grilling24x7 · 01-05-2013, 10:14 PM

Thanks!

That makes sense.

Now the search for one begins!

bo_b_q · 01-05-2013, 10:20 PM

Mine was used for motor oil...no liner as the oil kept it from rusting...just burned it out, used a leaf blower to add some extra air to get it good and hot, then a quick spray with the pressure washer.

Link to my build if it helps...nothing to different but you can see the burn out process.
http://www.bbq-brethren.com/forum/sh...d.php?t=149301

gtr · 01-05-2013, 10:25 PM

See if there's a drum company in your area. There is one in L.A. called "Apex Drum" that sells drums including refurbs. If you find such a place, ask for a refurb but tell them to not put in the rust inhibitor. Grab the drum and oil/greasre it right away and season as soon as you can.

Enkidu · 01-05-2013, 10:27 PM

Quote:

Originally Posted by gtr

See if there's a drum company in your area. There is one in L.A. called "Apex Drum" that sells drums including refurbs.

This is where I am buying mine.

jrn · 01-05-2013, 11:26 PM

If your going for the easiest ones, stay away from any with liners. You can make fine cookers with either the open or closed top barrels.

Foxfire · 01-06-2013, 12:50 AM

You also have the option of getting any food grade drum sandblasted down to bare steel. Usually $40 to $60 if you comparison shop enough.

dupemaster · 01-06-2013, 01:56 AM

Like mentioned above, a new, unlined, open headed drum is the easiest to do. do a google search on local supliers. I found them for under $100 localy.

grilling24x7 · 01-07-2013, 06:52 AM

Thanks guys,
I found a local supplier with a reconditioned drum for $38. I asked whether it had a lining and at first the lady hesitated but then said it has no lining (unlined).

When a drum is reconditioned, if there was a liner, is it all removed and pretty much stripped down to just a steel barrel? She offered a new barrel for $91.

jrn · 01-07-2013, 09:05 AM

As far as new drums go, the Cary Company had the best online prices that I saw. Investigate locally too. I was ready to give up finding good drums locally. Then I spoke to a Brethren from my same hometown who told me where to look. The place is a hair care products manufacturer. They dont advertise the barrels, just word of mouth. Closed top drums that were previously filled with light mineral oil. $20 a barrel all day long. No liners!

Don't give up looking. There may be good barrels right around you.

Jason :)

jrn · 01-07-2013, 09:08 AM

[QUOTE=grilling24x7;2319818]Thanks guys,
I found a local supplier with a reconditioned drum for $38. I asked whether it had a lining and at first the lady hesitated but then said it has no lining (unlined).

When a drum is reconditioned, if there was a liner, is it all removed and pretty much stripped down to just a steel barrel? She offered a new barrel for $91.[/QUOTE

Just a thought on reconditioned barrels. You're basically taking someone's word about what might have been in barrel previously.

grilling24x7 · 01-07-2013, 09:20 AM

correction - I just found a drum supplier in Baltimore that has new unlined 55 gallon drums for $70. I think that's a winner.

jrn · 01-07-2013, 09:28 AM

Quote:

Originally Posted by grilling24x7

correction - I just found a drum supplier in Baltimore that has new unlined 55 gallon drums for $70. I think that's a winner.

Cool! Your on your way. You're going to love cooking on it!

SmokerKing · 01-07-2013, 09:39 AM

Brand new un-lined drums are $70

01-05-2013, 09:54 PM	#1
grilling24x7 Full Fledged Farker Join Date: 05-17-11 Location: Baltimore, Maryland Downloads: 0 Uploads: 0	Easiest UDS Drum to use for a build? So I've read the redneck UDS thread and skimmed through the big 500 page one. I'm reading all this stuff about linings in the 55 gallon drum and how hard it is to scrub off. I'm aware that a good burn out is needed on any drum you are going to use as a UDS but which type doesn't require too much scrubbing and painful cleaning? I read some guys saying the "red liner" is a no-no but others say that liner comes right off. I'm a bit confused. I don't mind buying a new drum even though I see that some guys are getting them for free, but... What's the easiest type of 55 gallon drum to use in terms of that initial clean/burn out? Thanks! John __________________ Weber Performer 18.5" WSM UDS build: http://grilling24x7.com/UDS1.shtml http://www.grilling24x7.com

01-05-2013, 09:58 PM	#2
HeSmellsLikeSmoke somebody shut me the fark up. Join Date: 04-02-07 Location: Warren, Vermont Downloads: 0 Uploads: 0	Unlined, unused, open top drum. __________________ Jim - Another transplanted Texan Former KCBS CBJ Large and Medium Big Green Eggs , Black 18.5" WSM, Blue Weber Performer - Stainless, Green Weber OTG Kettle , Brinkmann SnP Pro, and a Stainless UDS. One retired Portable Kitchen grill. Red Thermapen, Maverick ET-73, EdgePro Apex Sharpener. Avatar is the original 1951 Weber Kettle

01-05-2013, 10:14 PM	#3
grilling24x7 Full Fledged Farker Join Date: 05-17-11 Location: Baltimore, Maryland Downloads: 0 Uploads: 0	Thanks! That makes sense. Now the search for one begins! __________________ Weber Performer 18.5" WSM UDS build: http://grilling24x7.com/UDS1.shtml http://www.grilling24x7.com

01-05-2013, 10:20 PM	#4
bo_b_q Knows what a fatty is. Join Date: 09-28-12 Location: Northern IN Downloads: 0 Uploads: 0	Mine was used for motor oil...no liner as the oil kept it from rusting...just burned it out, used a leaf blower to add some extra air to get it good and hot, then a quick spray with the pressure washer. Link to my build if it helps...nothing to different but you can see the burn out process. http://www.bbq-brethren.com/forum/sh...d.php?t=149301 __________________ -Bo Golden Dome UDS "Dorthy" \| ~22" Char-broil "Char-lene" \| iGrill \| Supersonic Blue Thermapen Where there is love there is barbecue. – Gandhi

01-05-2013, 10:25 PM	#5
gtr Quintessential Chatty Farker Join Date: 10-16-10 Location: Culver City, CA Downloads: 2 Uploads: 0	See if there's a drum company in your area. There is one in L.A. called "Apex Drum" that sells drums including refurbs. If you find such a place, ask for a refurb but tell them to not put in the rust inhibitor. Grab the drum and oil/greasre it right away and season as soon as you can. __________________ 50" Klose BYC, Backwoods Chubby, UDS, 26" & 22.5" Weber Kettles, Jumbo Joe, WGA, WSJ/MUDS, Jumbo Old Smokey, Pig Hibachi, a piece of expanded metal I throw over the fire pit sometimes, Stealthy Black & Vol Orange Thermapens Displaced East Tennesseean Proud recipient of a Tick Former outlaw MOINK baller, now IMBAS Certified, but still lookin' over my shoulder. Golden Goose Egg - Got 2 in the nest baby! SPFP Mayzie's keeping an eye out for you! WTFWGALD?

01-05-2013, 11:26 PM	#7
jrn Full Fledged Farker Join Date: 07-30-12 Location: Quitman, Ms Downloads: 0 Uploads: 0	If your going for the easiest ones, stay away from any with liners. You can make fine cookers with either the open or closed top barrels. __________________ UDS, mini wsm

01-06-2013, 12:50 AM	#8
Foxfire Full Fledged Farker Join Date: 08-28-12 Location: San Jose, CA Downloads: 0 Uploads: 0	You also have the option of getting any food grade drum sandblasted down to bare steel. Usually $40 to $60 if you comparison shop enough. __________________ ~ Scott ~ Blue Weber Performer + Craycort CI • Brick Red Weber One-Touch Platinum • Weber 26.75 Kettle • Akorn Kamado • ET 732 • Record-crushing ORANGE Thermapen • UDS In Progress

01-06-2013, 01:56 AM	#9
dupemaster Knows what a fatty is. Join Date: 08-11-12 Location: North Bend, WA Downloads: 0 Uploads: 0	Like mentioned above, a new, unlined, open headed drum is the easiest to do. do a google search on local supliers. I found them for under $100 localy.

01-07-2013, 06:52 AM	#10
grilling24x7 Full Fledged Farker Join Date: 05-17-11 Location: Baltimore, Maryland Downloads: 0 Uploads: 0	Thanks guys, I found a local supplier with a reconditioned drum for $38. I asked whether it had a lining and at first the lady hesitated but then said it has no lining (unlined). When a drum is reconditioned, if there was a liner, is it all removed and pretty much stripped down to just a steel barrel? She offered a new barrel for $91. __________________ Weber Performer 18.5" WSM UDS build: http://grilling24x7.com/UDS1.shtml http://www.grilling24x7.com

01-07-2013, 09:05 AM	#11
jrn Full Fledged Farker Join Date: 07-30-12 Location: Quitman, Ms Downloads: 0 Uploads: 0	As far as new drums go, the Cary Company had the best online prices that I saw. Investigate locally too. I was ready to give up finding good drums locally. Then I spoke to a Brethren from my same hometown who told me where to look. The place is a hair care products manufacturer. They dont advertise the barrels, just word of mouth. Closed top drums that were previously filled with light mineral oil. $20 a barrel all day long. No liners! Don't give up looking. There may be good barrels right around you. Jason :) __________________ UDS, mini wsm

01-07-2013, 09:08 AM	#12
jrn Full Fledged Farker Join Date: 07-30-12 Location: Quitman, Ms Downloads: 0 Uploads: 0	[QUOTE=grilling24x7;2319818]Thanks guys, I found a local supplier with a reconditioned drum for $38. I asked whether it had a lining and at first the lady hesitated but then said it has no lining (unlined). When a drum is reconditioned, if there was a liner, is it all removed and pretty much stripped down to just a steel barrel? She offered a new barrel for $91.[/QUOTE Just a thought on reconditioned barrels. You're basically taking someone's word about what might have been in barrel previously. __________________ UDS, mini wsm

01-07-2013, 09:20 AM	#13
grilling24x7 Full Fledged Farker Join Date: 05-17-11 Location: Baltimore, Maryland Downloads: 0 Uploads: 0	correction - I just found a drum supplier in Baltimore that has new unlined 55 gallon drums for $70. I think that's a winner. __________________ Weber Performer 18.5" WSM UDS build: http://grilling24x7.com/UDS1.shtml http://www.grilling24x7.com

01-07-2013, 09:39 AM	#15
SmokerKing Full Fledged Farker Join Date: 09-07-10 Location: Sunny AZ Downloads: 0 Uploads: 0	Brand new un-lined drums are $70