My smoker needs a blanket....brrrrr - Page 2

JP7794 · 01-08-2013, 11:04 AM

I am not sure how well this would work for a WSM or UDS. Has anyone tried one?

http://www.ebay.com/itm/Military-Arm...item35bcb517d8

Meat & Heat · 01-08-2013, 07:47 PM

Quote:

Originally Posted by HankB

Does that have the problem that some (I) have with handling fiberglass insulation? Namely fiberglass fibers making my arms itch like crazy.

Yeah, but I had a coat on.
Still got a little itchy but it was free at the time, looking into some welding blakents for comps and such.
We do a comp up in northern CO in the summer and it can get into the thirties at night.

va92bronco · 01-08-2013, 09:09 PM

I use a old comforter from a king size bed. Been meaning to line the bottom with a welding blanket, but it works great for my smoker. I cut out the areas where it goes around the counter weight pipe and exhaust. then sewed the seams back. Works great and looks custom made (which it is I guess). The smoke has turned the back brown in a several places, but I could care less.

RX2006JE · 01-08-2013, 09:36 PM

I use 2 of the welding blankets from harbor freight stacked on top of each other then put a moving blanket over that. Works great. As mentioned before you can't just use the moving blankets by themselves unless you want to scrape it off your pit.

thirdeye · 01-08-2013, 09:57 PM

Quote:

Originally Posted by JimF

I went to harbor freight looking for a welding blanket and they didnt have any. So I bought moving blankets. Turns out they are pretty thin and melt when they get hot. DO NOT USE MOVING BLANKETS. Anyone want to buy two?

I've used the heavy felt-like movers blanket but they take on a lot of water if it's snowing. I borrowed a wool fire blanket from work and liked it so much I ordered a couple of wool blankets from a surplus store.

BAD324 · 01-09-2013, 08:46 AM

With the frigid temps here and my desire to smoke more I think I'm going to look at the welding blanket route too

aawa · 01-09-2013, 09:38 AM

PWA runs non-insulated UDS's off wicked good weekend warrior lump in -43F weather in AK and puts out some great looking food. No blankets needed according to him.

thirdeye · 01-09-2013, 10:56 AM

Quote:

Originally Posted by aawa

PWA runs non-insulated UDS's off wicked good weekend warrior lump in -43F weather in AK and puts out some great looking food. No blankets needed according to him.

Probably more than the outside temp, it's the wind that affects my drums. When I blanket them I fold together until I have a 20" or so wide piece, three layers thick. I wrap this at grate level, not at the firebox. You can see a blanket above the center rib in this photo.

Fo Sizzle My Nizzle · 01-09-2013, 11:08 AM

Quote:

Originally Posted by Meat & Heat

Yeah, but I had a coat on.
Still got a little itchy but it was free at the time, looking into some welding blakents for comps and such.
We do a comp up in northern CO in the summer and it can get into the thirties at night.

Sissy!

accuseal · 01-12-2013, 12:54 PM

Quote:

Originally Posted by HankB

Does that have the problem that some (I) have with handling fiberglass insulation? Namely fiberglass fibers making my arms itch like crazy.

Welding blankets are made from fiberglass cloth that has been heat treated. All the little fuzzy stuff has been burned off so it wont get into your skin and make you itch.

Sent from my SCH-I905 using Tapatalk HD

h20loo · 01-13-2013, 06:11 AM

what smoker are you trying to wrap?
I use silver bubble wrap from Home Depot on my drum(been using the same piece for 5 years) and it gives me a 30 degree bump in grate temp.
My Egg only gets an umbrella when it rains.
My stick smoker doesn't get nuffin cause its a sunny day, get the whole clan, buddy. And I like looking at it as much as cooking on it.

1dusty00a · 01-13-2013, 06:49 AM

Quote:

Originally Posted by JimF

I went to harbor freight looking for a welding blanket and they didnt have any. So I bought moving blankets. Turns out they are pretty thin and melt when they get hot. DO NOT USE MOVING BLANKETS. Anyone want to buy two?

Gotta agree with Jim!!!!!!!!!!!! DO NOT USE MOVING BLANKETS!!!! Besides Melting They WILL ruin the Paint on Your Smoker and definatly make it an UGLY Drum Smoker

Dusty

Cayman1 · 01-13-2013, 09:25 AM

How about an old army blanket?

---k--- · 01-13-2013, 09:30 AM

I use a welding blanket from Harbor Freight. Folded over and wrapped around does really well. I don't think it takes much insulation. Tip, don't use bungee chords to hold it on. They will melt. I need to pick up some tie downs with ratchets on them.

For ribs or something like that, I can do without the blanket by lighting a bigger fire and using more fuel. The blanket comes in handy for a 12 hr cook. I've done it without the blanket at -5*, but it used up all the fuel and needed refueling at like 10 hr.

Also, remember that wind is much worse that cold. So make sure your problem isn't the wind.

01-08-2013, 11:04 AM	#16
JP7794 Full Fledged Farker Join Date: 04-13-12 Location: KANSAS CITY MISSOURI Downloads: 2 Uploads: 1	I am not sure how well this would work for a WSM or UDS. Has anyone tried one? http://www.ebay.com/itm/Military-Arm...item35bcb517d8 __________________ "You don't win friends with salad" - Homer Simpson Jim - KCBS CBJ 18.5" WSM - Packer Green Thermapen - Auber PID Temperature Controller - Mini WSM GO PACK GO!

01-08-2013, 09:09 PM	#18
va92bronco On the road to being a farker Join Date: 01-18-12 Location: Mechanicsville, Va Downloads: 0 Uploads: 0	I use a old comforter from a king size bed. Been meaning to line the bottom with a welding blanket, but it works great for my smoker. I cut out the areas where it goes around the counter weight pipe and exhaust. then sewed the seams back. Works great and looks custom made (which it is I guess). The smoke has turned the back brown in a several places, but I could care less. __________________ Damage BBQ 250gal offset reverse flow homemade smoker on 5x8 trailer named #2.

01-09-2013, 09:38 AM	#22
aawa is one Smokin' Farker Join Date: 07-03-12 Location: Virginia Beach Downloads: 0 Uploads: 0	PWA runs non-insulated UDS's off wicked good weekend warrior lump in -43F weather in AK and puts out some great looking food. No blankets needed according to him. __________________ Weber Mini WSM x2 Weber 22.5in OTG x2 Weber Touch and Go Performer *Sublime Smoke UDS* Maverick ET-732 World's Fastest Blue Thermapen *

01-13-2013, 09:30 AM	#29
---k--- is Blowin Smoke! Join Date: 09-07-10 Location: Chicago, IL - West burbs Downloads: 3 Uploads: 0	I use a welding blanket from Harbor Freight. Folded over and wrapped around does really well. I don't think it takes much insulation. Tip, don't use bungee chords to hold it on. They will melt. I need to pick up some tie downs with ratchets on them. For ribs or something like that, I can do without the blanket by lighting a bigger fire and using more fuel. The blanket comes in handy for a 12 hr cook. I've done it without the blanket at -5*, but it used up all the fuel and needed refueling at like 10 hr. Also, remember that wind is much worse that cold. So make sure your problem isn't the wind. __________________ -Ryan Proudly Smoking on a UDS, PBC & Accidental Winner of the 2012 "Saucy" Throwdown.

01-08-2013, 09:36 PM	#19
RX2006JE On the road to being a farker Join Date: 07-16-09 Location: Anniston, AL Downloads: 0 Uploads: 0	I use 2 of the welding blankets from harbor freight stacked on top of each other then put a moving blanket over that. Works great. As mentioned before you can't just use the moving blankets by themselves unless you want to scrape it off your pit.

01-09-2013, 08:46 AM	#21
BAD324 Got Wood. Join Date: 12-13-12 Location: Cleveland, OH Downloads: 0 Uploads: 0	With the frigid temps here and my desire to smoke more I think I'm going to look at the welding blanket route too

01-13-2013, 06:11 AM	#26
h20loo is one Smokin' Farker Join Date: 01-22-08 Location: waterloo ontario Downloads: 0 Uploads: 0	what smoker are you trying to wrap? I use silver bubble wrap from Home Depot on my drum(been using the same piece for 5 years) and it gives me a 30 degree bump in grate temp. My Egg only gets an umbrella when it rains. My stick smoker doesn't get nuffin cause its a sunny day, get the whole clan, buddy. And I like looking at it as much as cooking on it.